ABC phase sequential In a three-phase balanced Star-Star connected system, the phase on the source side voltage is 300 Vrms. The line impedance in the system is Zhat=1 ohm. star bound Each of the loads has a capacitive load of 5-j3 ohms and an inductive load of 9+j2 ohms. is the parallel connected form of the load. In the light of this information, a) Find the real power provided by the source. b) Determine the power factor of the source

ABC phase sequential In a three-phase balanced Star-Star connected system, the phase on the source side voltage is 300 Vrms. The line impedance in the system is Zhat=1 ohm. star bound Each of the loads has a capacitive load of 5-j3 ohms and an inductive load of 9+j2 ohms. is the parallel connected form of the load. In the light of this information, a) Find the real power provided by the source. b) Determine the power factor of the source

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.13MCQ

See similar textbooks

Similar questions

The three-phase source line-to-neutral voltages are given by Ean=100,Ebh=10+240, and Ecn=10240volts. Is the source balanced? (a) Yes (b) No
Let a series RLC network be connected to a source voltage V, drawing a current I. (a) In terms of the load impedance Z=ZZ, find expressions for P and Q, from complex power considerations. (b) Express p(t) in terms of P and Q, by choosing i(t)=2Icost. (c) For the case of Z=R+jL+1/jC, interpret the result of part (b) in terms of P,QL, and Qc. In particular, if 2LC=1, when the inductive and capacitive reactances cancel, comment on what happens.
A three-phase system has balanced conditions so that the per-phase circuit representation can be used as shown in Figure 1 Select the turns ratio of the step-up and step-down transformers that the system operates with an efficiency greater than 99 percent. Moreover, find the complex power (received or given) of all components in the circuit and the V1 and V2 voltages. The load voltage is specified as 4 kV rms, and the load impedance is 4/3 ohm. ..
Suppose that a current source with Is amperes of current is connected in parallel to a pair of impedances Z₁ and Z2. Let I₁ be the current through Z₁ and 12 be the current through Z₂. Then, the total voltage Is is divided between 1₁ and 12 in proportion to impedance values Z₁ and Z2. a. True O b. False
Three impedances (4-j6) ohm, (6+j8) ohm, and (5-j3) ohms are connected in parallel. Calculate the current in each branch when the total supply current is 20 A. Please provide its solution...its urgently needed...please.
1. Given the circuit below, the phase voltages are given by Van = 20040° Vrms. The source impedance is 5 + j7 per phase and the wire impedance is 8 +j10 per phase. Let the load impedance be Zy = 50 ohms. Find: Van Vin Ven a. II, and Ic b. c. VAN, VBN, and VCN, and VAB, VBC, and VCA Z₂ Z₂ Z₂ Zw Zw Zw B C le N
It is required to connect active and capacitive reactive mechanical meters that will measure the electrical energy used in a stone crushing quarry that consumes more than 50KVA. Show the connection diagram of these meters to the three-phase line coming from the network by drawing a figure.
Need asap pls help. Solve for the voltages across and currents through each component. Show the complete solution and explain. The total power should be zero..
A balanced load is connected in star across a 3 phasec415V 50Hz supply. The load consists of a coil of resistance 25 ohms and inducrance 0.5 henry in paeallel with a purw resistance of 28 ohms and a pure capaciror of 60microfarads capacitance ,in each branch. Calculate a. The line currents
Example: A balanced positive-sequence wye-connected 60 Hz three-phase source has line-to- line voltages of V,=1000 V. This source is connected to a balanced wye-connected load. Each phase of the load consists of a 0.2 H inductance in series with a 100 0 resistance. Find the line-to-neutral voltages, the line currents, the power, and the reactive power delivered to the load. Assume that the phase of Van is zero.
In a balanced delta connected 3-phase circuit, has resistance 25 ohm and inductive reactance 40 ohm, connected to a 400V,50HZ 3-phase supply voltage, then total power delivered to load is Select one: a. 5397.76W b. 1635.34KW c. 7593.26W d. NONE OF THESE
Two delta connected loads are connected in parallel and powered by a balanced Y-connectedsource. The smaller of two loads draws 10 kVA at a lagging power factor of 0.75 and the largerdraws 25 kVA at a leading power factor of 0.8. The line voltage is 400 V. Calculate a) The powerfactor at which the source is operating. b) The total power drawn by the two loads. c) The phasecurrent of each load.