Assess the impact of a quality initiative (Learning Objective 5)
Dayton Industries is contemplating some operational changes to reduce its overall costs of quality. The company believes that if it upgrades one component of its product at an additional cost of $2.00 per unit, it will be able to decrease its current warranty repair rate by 90%. The company also believes it will be able to sell 1,000 more units over the next year due to an enhanced reputation for quality. Dayton currently has enough excess capacity to make the 1,000 extra units needed to meet the increased demand. The following data reflect current operations (prior to making the operational changes):
Current production and sales level (in units) | 100,000 |
Sales price per unit | $150 |
Current variable cost of making and selling one unit | $ 80 |
Variable warranty repair costs per unit repaired | $ 30 |
Current warranty repair rate of units produced | 10% |
What is the anticipated annual effect on operating income from adopting this quality initiative? To answer this question, first calculate the total costs of quality before making the operational changes and then calculate the total costs of quality after making the operational changes. Compute the difference between the “before” and the “after.”
Want to see the full answer?
Check out a sample textbook solutionChapter 4 Solutions
Managerial Accounting (5th Edition)
- Eric Krassow's firm is about to bid on a new radar system. Although the product uses new technology, Krassow believes that a learning rate of 75% is appropriate. The first unit is expected to take 700 hours, and the contract is for 40 units. What is the total amount of hours to build the 40 units?arrow_forwardA university's college of engineering would like to determine how much it will cost to keep its computing equipment current. In today's dollars, the college estimates that it will cost $100,000 to replace old computing equipment. Due to decreasing prices on computers, it estimates that this cost will decrease each of the following years by 2%. What would the present worth of computing updates for years 1-5 be, assuming a required 10% real return on its investments?arrow_forwardA company intends to install new management software for its warehouse. The software will cost $47,000 to buy and will cost an additional $148,000 to install and implement. It is anticipated that it will save the company $44,000 through reductions in staff and $69,000 in general inventory costs in the first year after installation. What is the total benefit to the company in the first year if they choose to install the software?arrow_forward
- Please step by step process. Professor von Nordenflycht presents Dean Kayande with two new proposals for offering a graduate certificate program. Both programs will cost $60,000, for classroom and instructor time. Both programs are projected to have two possible revenue outcomes. Program 1, which focuses on accounting, is projected to have a 50% chance of generating $150,000 in revenue and a 50% chance of generating $100,000 in revenue. Project 2, which focuses on cryptocurrencies, is predicted to have a 62.5% chance of generating $200,000 in revenue or, otherwise, generating no revenue! a. What is the expected value of each program? b. What is the variance of each program?arrow_forwardA university's college of engineering would like to determine how much it will cost to keep its computing equipment current. In today's dollars, the college estimates that it will cost $160,000 to replace old computing equipment. Due to decreasing prices on computers, it estimates that this cost will decrease each of the following years by 4%. What would the present worth of computing updates for years 1-5 be, assuming a required 11% real return on its investments? Click here to access the TVM Factor Table calculator. $ Carry all interim calculations to 5 decimal places and then round your final answer to a whole number. The tolerance is ± $10.arrow_forwardSage Laundromat is trying to enhance the services it provides to customers, mostly college students. It is looking into the purchase of new highefficiency washing machines that will allow for the laundry’s status to be checked via smartphone. Sage estimates the cost of the new equipment at $159,000. The equipment has a useful life of 9 years. Sage expects cash fixed costs of $80,000 per year to operate the new machines, as well as cash variable costs in the amount of 5% of revenues. Sage evaluates investments using a cost of capital of 10%. Q. Calculate the payback period and the discounted payback period for this investment, assuming Sage expects to generate $140,000 in incremental revenues every year from the new machines.arrow_forward
- Flyingbird Learning Ltd. is a company located in Virginia. The company develops online training platforms for corporate clients and provides content support on a subscription basis. Suppose during the summer, you started a part-time job at this company. The company is considering upgrading the computers used by its graphic design department. The five computers being replaced cost $12,000 two years ago and now have a net book value of $4,000 based on using straight-line depreciation, a three-year useful life, and $0 salvage value. Your analysis indicates that you can likely get about $500 per computer if you advertise them online. The new computers being considered will cost $15,000 in total and will also have a three-year useful life, with an estimated salvage value of $0. The new computers each include annual licences for graphic design software for which the company is currently paying a total of $500 per year, per computer. Required: a) You prepared an analysis of the financial…arrow_forward× Your answer is incorrect. A university's college of engineering would like to determine how much it will cost to keep its computing equipment current. In today's dollars, the college estimates that it will cost $190,000 to replace old computing equipment. Due to decreasing prices on computers, it estimates that this cost will decrease each of the following years by 7%. What would the present worth of computing updates for years 1-5 be, assuming a required 15% real return on its investments? Click here to access the TVM Factor Table calculator. A Carry all interim calculations to 5 decimal places and then round your final answer to a whole number. The tolerance is + $10. 564921.75arrow_forwardCitco Company is considering investing up to $512,000 in a sustainability-enhancing project. Its managers have narrowed their choices to three potential projects. • Project A would redesign the production process to recycle raw materials waste back into the production cycle, saving on direct materials costs and reducing the amount of waste sent to the landfill. Project B would remodel an office building, utilizing solar panels and natural materials to create a more energy-efficient and healthy work environment. Project C would build a new training facility in an underserved community, providing jobs and economic security for the local community. Required: 1. Assuming the cost of capital is 12%, complete the table below by computing the payback period, NPV, profitability index, and internal rate of return. (Future Value of $1, Present Value of $1, Future Value Annuity of $1, Present Value Annuity of $1.) 2. Based strictly on the economic analysis, in which project should they invest?…arrow_forward
- Lindell Manufacturing embarked on an ambitious quality program that is centered on continual improvement. This improvement is operationalized by declining quality costs from year to year. Lindell rewards plant managers, production supervisors, and workers with bonuses ranging from 1,000 to 10,000 if their factory meets its annual quality cost goals. Len Smith, manager of Lindells Boise plant, felt obligated to do everything he could to provide this increase to his employees. Accordingly, he has decided to take the following actions during the last quarter of the year to meet the plants budgeted quality cost targets: a. Decrease inspections of the process and final product by 50% and transfer inspectors temporarily to quality training programs. Len believes this move will increase the inspectors awareness of the importance of quality; also, decreasing inspection will produce significantly less downtime and less rework. By increasing the output and decreasing the costs of internal failure, the plant can meet the budgeted reductions for internal failure costs. Also, by showing an increase in the costs of quality training, the budgeted level for prevention costs can be met. b. Delay replacing and repairing defective products until the beginning of the following year. While this may increase customer dissatisfaction somewhat, Len believes that most customers expect some inconvenience. Besides, the policy of promptly dealing with customers who are dissatisfied could be reinstated in 3 months. In the meantime, the action would significantly reduce the costs of external failure, allowing the plant to meet its budgeted target. c. Cancel scheduled worker visits to customers plants. This program, which has been very well received by customers, enables Lindell workers to see just how the machinery they make is used by the customer and also gives them first-hand information on any remaining problems with the machinery. Workers who went on previous customer site visits came back enthusiastic and committed to Lindells quality program. Lindells quality program staff believes that these visits will reduce defects during the following year. Required: 1. Evaluate Lens ethical behavior. In this evaluation, consider his concern for his employees. Was he justified in taking the actions described? If not, what should he have done? 2. Assume that the company views Lens behavior as undesirable. What can the company do to discourage it? 3. Assume that Len is a CMA and a member of the IMA. Refer to the ethical code for management accountants in Chapter 1. Were any of these ethical standards violated?arrow_forwardMallette Manufacturing, Inc., produces washing machines, dryers, and dishwashers. Because of increasing competition, Mallette is considering investing in an automated manufacturing system. Since competition is most keen for dishwashers, the production process for this line has been selected for initial evaluation. The automated system for the dishwasher line would replace an existing system (purchased one year ago for 6 million). Although the existing system will be fully depreciated in nine years, it is expected to last another 10 years. The automated system would also have a useful life of 10 years. The existing system is capable of producing 100,000 dishwashers per year. Sales and production data using the existing system are provided by the Accounting Department: All cash expenses with the exception of depreciation, which is 6 per unit. The existing equipment is being depreciated using straight-line with no salvage value considered. The automated system will cost 34 million to purchase, plus an estimated 20 million in software and implementation. (Assume that all investment outlays occur at the beginning of the first year.) If the automated equipment is purchased, the old equipment can be sold for 3 million. The automated system will require fewer parts for production and will produce with less waste. Because of this, the direct material cost per unit will be reduced by 25 percent. Automation will also require fewer support activities, and as a consequence, volume-related overhead will be reduced by 4 per unit and direct fixed overhead (other than depreciation) by 17 per unit. Direct labor is reduced by 60 percent. Assume, for simplicity, that the new investment will be depreciated on a pure straight-line basis for tax purposes with no salvage value. Ignore the half-life convention. The firms cost of capital is 12 percent, but management chooses to use 20 percent as the required rate of return for evaluation of investments. The combined federal and state tax rate is 40 percent. Required: 1. Compute the net present value for the old system and the automated system. Which system would the company choose? 2. Repeat the net present value analysis of Requirement 1, using 12 percent as the discount rate. 3. Upon seeing the projected sales for the old system, the marketing manager commented: Sales of 100,000 units per year cannot be maintained in the current competitive environment for more than one year unless we buy the automated system. The automated system will allow us to compete on the basis of quality and lead time. If we keep the old system, our sales will drop by 10,000 units per year. Repeat the net present value analysis, using this new information and a 12 percent discount rate. 4. An industrial engineer for Mallette noticed that salvage value for the automated equipment had not been included in the analysis. He estimated that the equipment could be sold for 4 million at the end of 10 years. He also estimated that the equipment of the old system would have no salvage value at the end of 10 years. Repeat the net present value analysis using this information, the information in Requirement 3, and a 12 percent discount rate. 5. Given the outcomes of the previous four requirements, comment on the importance of providing accurate inputs for assessing investments in automated manufacturing systems.arrow_forwardJavier Company has sales of 8 million and quality costs of 1,600,000. The company is embarking on a major quality improvement program. During the next three years, Javier intends to attack failure costs by increasing its appraisal and prevention costs. The right prevention activities will be selected, and appraisal costs will be reduced according to the results achieved. For the coming year, management is considering six specific activities: quality training, process control, product inspection, supplier evaluation, prototype testing, and redesign of two major products. To encourage managers to focus on reducing non-value-added quality costs and select the right activities, a bonus pool is established relating to reduction of quality costs. The bonus pool is equal to 10 percent of the total reduction in quality costs. Current quality costs and the costs of these six activities are given in the following table. Each activity is added sequentially so that its effect on the cost categories can be assessed. For example, after quality training is added, the control costs increase to 320,000, and the failure costs drop to 1,040,000. Even though the activities are presented sequentially, they are totally independent of each other. Thus, only beneficial activities need be selected. Required: 1. Identify the control activities that should be implemented, and calculate the total quality costs associated with this selection. Assume that an activity is selected only if it increases the bonus pool. 2. Given the activities selected in Requirement 1, calculate the following: a. The reduction in total quality costs b. The percentage distribution for control and failure costs c. The amount for this years bonus pool 3. Suppose that a quality engineer complained about the gainsharing incentive system. Basically, he argued that the bonus should be based only on reductions of failure and appraisal costs. In this way, investment in prevention activities would be encouraged, and eventually, failure and appraisal costs would be eliminated. After eliminating the non-value-added costs, focus could then be placed on the level of prevention costs. If this approach were adopted, what activities would be selected? Do you agree or disagree with this approach? Explain.arrow_forward
- Financial And Managerial AccountingAccountingISBN:9781337902663Author:WARREN, Carl S.Publisher:Cengage Learning,Managerial AccountingAccountingISBN:9781337912020Author:Carl Warren, Ph.d. Cma William B. TaylerPublisher:South-Western College PubCornerstones of Cost Management (Cornerstones Ser...AccountingISBN:9781305970663Author:Don R. Hansen, Maryanne M. MowenPublisher:Cengage Learning
- Managerial Accounting: The Cornerstone of Busines...AccountingISBN:9781337115773Author:Maryanne M. Mowen, Don R. Hansen, Dan L. HeitgerPublisher:Cengage Learning