Concept explainers
Material-cost variances, use of variances for performance evaluation. Katharine Johnson is the owner of Best Bikes, a company that produces high-quality cross-country bicycles. Best Bikes participates in a supply chain that consists of suppliers, manufacturers, distributors, and elite bicycle shops. For several years Best Bikes has purchased titanium from suppliers in the supply chain. Best Bikes uses titanium for the bicycle frames because it is stronger and lighter than other metals and therefore increases the quality of the bicycle. Earlier this year, Best Bikes hired Michael Bentfield, a recent graduate from State University, as purchasing manager. Michael believed that he could reduce costs if he purchased titanium from an online marketplace at a lower price.
Best Bikes established the following standards based upon the company’s experience with previous suppliers. The standards are as follows:
Cost of titanium | $18 per pound |
Titanium used per bicycle | 8 lbs. |
Actual results for the first month using the online supplier of titanium are as follows:
Bicycles produced | 400 |
Titanium purchased | 5,200 lb. for $88,400 |
Titanium used in production | 4,700 lb. |
- 1. Compute the direct materials price and efficiency variances.
Required
- 2. What factors can explain the variances identified in requirement 1? Could any other variances be affected?
- 3. Was switching suppliers a good idea for Best Bikes? Explain why or why not.
- 4. Should Michael Bentfield’s performance evaluation be based solely on price variances? Should the production manager’s evaluation be based solely on efficiency variances? Why is it important for Katharine Johnson to understand the causes of a variance before she evaluates performance?
- 5. Other than performance evaluation what reasons are there for calculating variances?
- 6. What future problems could result from Best Bikes’ decision to buy a lower quality of titanium from the online marketplace?
Want to see the full answer?
Check out a sample textbook solutionChapter 7 Solutions
Horngren's Cost Accounting: A Managerial Emphasis (16th Edition)
- Cost Estimation; Machine Replacement; Ethics Hardison Inc. manufactures glass for officebuildings in Florida. As a result of age and wear, a critical machine in the production process hasbegun to produce quality defects. Hardison is considering replacing the old machine with a newmachine, either brand A or brand B. The manufacturer has provided Hardison with the following dataon the costs of operation of each machine brand at various levels of output:Output(square yards)Brand AEstimated Total CostsBrand BEstimated Total Costs2,000 $ 97,000 $ 120,0004,000 125,000 160,0008,000 180,000 200,00016,000 225,000 260,00032,000 280,000 300,00064,000 438,000 368,000Required1. Graph the data for the two brands of machines.2. Use the high-low method to determine the cost equation for each brand of machine and use the results tocalculate the costs of operating each machine if Hardison’s output is expected to be 25,000 square yardsarrow_forwardKing Bathroom Fixtures (KBF) makes faucets, basins, and so on primarily for home use and sold through major retail chains. The design team at KBF has been working on a unique design to provide reasonable pressure while still conserving water. The market is quite competitive and KBF analysts believe that the fixture could sell for a unit price of $36.40. The cost accounting team at KBF has estimated the following manufacturing costs for the new design. Direct materials $ 19.75 Direct labor 5.90 Manufacturing overhead 8.85 Total $ 34.50 An operating profit of 12 percent of manufacturing costs is required for all new products at KBF without the explicit consent of the top executive team. At KBF, operating margin is defined as revenues less manufacturing costs, all divided by manufacturing costs). Required: a. Suppose KBF uses cost-plus pricing, setting the price equal to manufacturing costs plus 12 percent of manufacturing costs. What price should it charge for the…arrow_forwardEthics, levers of control. Best Moulding is a large manufacturer of wood picture frame moulding. The company operates distribution centers in Dallas and Philadelphia. The distribution centers cut frames to size (called “chops”) and ship them to custom picture framers. Because of the exacting standards and natural flaws of wood picture frame moulding, thecompany typically produces a large amount of waste in cutting chops. In recent years, the company’s average yield has been 78% of length moulding. The remaining 22% is sent to a wood recycler. Best’s performance-evaluation system pays its distribution center managers substantial bonuses if the company achieves annual budgeted profit numbers. In the last quarter of 2014, Stuart Brown, Best’s controller, noted a signicant increase in yield percentage of the Dallas distributioncenter, from 76% to 87%. This increase resulted in a 6% increase in the center’s prots. During a recent trip to the Dallas center, Brown wandered into the moulding…arrow_forward
- The Sedona Company is dedicated to making products that meet the needs of customers in a sustainable manner. Sedona is best known for its KLN water bottle, which is a BPA-free, dishwasher-safe, bubbly glass bottle in a soft silicone sleeve. The production process consists of three basic operations. In the first operation, the glass is formed by remelting cullets (broken or refuse glass). In the second operation, the glass is assembled with the silicone gasket and sleeve. The resulting product is finished in the final operation with the addition of the polypropylene cap. Consulting studies have indicated that of the total conversion costs required to complete a finished unit, the forming operation requires 60%, the assembly 30%, and the finishing 10%. Cullets purchased $67,500 Silicone purchased $24,000 Polypropylene used $ 6,000 Total conversion costs incurred $68,850 Ending inventory, cullets $ 4,500 Ending inventory, silicone $ 3,000 Number of bottles completed and transferred…arrow_forwardThe Sedona Company is dedicated to making products that meet the needs of customers in a sustainable manner. Sedona is best known for its KLN water bottle, which is a BPA-free, dishwasher-safe, bubbly glass bottle in a soft silicone sleeve. The production process consists of three basic operations. In the first operation, the glass is formed by remelting cullets (broken or refuse glass). In the second operation, the glass is assembled with the silicone gasket and sleeve. The resulting product is finished in the final operation with the addition of the polypropylene cap. Consulting studies have indicated that of the total conversion costs required to complete a finished unit, the forming operation requires 60%, the assembly 30%, and the finishing 10%. Cullets purchased $67,500 Silicone purchased $24,000 Polypropylene used $ 6,000 Total conversion costs incurred $68,850 Ending inventory, cullets $ 4,500 Ending inventory, silicone $ 3,000 Number of bottles completed and transferred…arrow_forwardThe Sedona Company is dedicated to making products that meet the needs of customers in a sustainable manner. Sedona is best known for its KLN water bottle, which is a BPA-free, dishwasher-safe, bubbly glass bottle in a soft silicone sleeve. The production process consists of three basic operations. In the first operation, the glass is formed by remelting cullets (broken or refuse glass). In the second operation, the glass is assembled with the silicone gasket and sleeve. The resulting product is finished in the final operation with the addition of the polypropylene cap. Consulting studies have indicated that of the total conversion costs required to complete a finished unit, the forming operation requires 60%, the assembly 30%, and the finishing 10%. Cullets purchased $67,500 Silicone purchased $24,000 Polypropylene used $ 6,000 Total conversion costs incurred $68,850 Ending inventory, cullets $ 4,500 Ending inventory, silicone $ 3,000 Number of bottles completed and transferred…arrow_forward
- Pacific Decor, Inc., designs, manufactures, and sells contemporary wood furniture. Ling Li is a furniture designer for Pacific. Li has spent much of the past month working on the design of a high-end dining room table. The design has been well-received by Jose Alvarez, the product development manager. However, Alvarez wants to make sure that the table can be priced competitively. Amy Hoover, Pacific's cost accountant, presents Alvarez with the following cost data for the expected production of 200 tables: Design cost $ 5,000 Direct materials 120,000 Direct manufacturing labor Variable manufacturing overhead Fixed manufacturing overhead 142,000 64,000 46,500 Marketing 15,000 1. Alvarez thinks that Pacific can successfully market the table for $2,000. The company's target operating income is 10% of revenue. Calculate the target full cost of producing the 200 tables. Does the cost estimate developed by Hoover meet Pacific's requirements? Is value engineering needed? 2. Alvarez discovers…arrow_forwardSarasota Company makes swimsuits and sells these suits directly to retailers. Although Sarasota has a variety of suits, it does not make the Performance suit used by highly skilled swimmers. The market research department believes that a strong market exists for this type of suit. The department indicates that the Performance suit would sell for approximately $100. Given its experience, Sarasota believes the Performance suit would have the following manufacturing costs. Direct materials Direct labor Manufacturing overhead Total costs (a1) $29 Selling price 35 36 $100 Assume that Sarasota uses cost-plus pricing, setting the selling price 25% above its costs. What would be the price charged for the Performance swimsuit?arrow_forwardThe Sedona Company is dedicated to making products that meet the needs of customers in a sustainable manner. Sedona is best known for its KLN water bottle, which is a BPA-free, dishwasher-safe, bubbly glass bottle in a soft silicone sleeve. The production process consists of three basic operations. In the first operation, the glass is formed by remelting cullets (broken or refuse glass). In the second operation, the glass is assembled with the silicone gasket and sleeve. The resulting product is finished in the final operation with the addition of the polypropylene cap. Consulting studies have indicated that of the total conversion costs required to complete a finished unit, the forming operation requires 60%, the assembly 30%, and the finishing 10%. Cullets purchased $67,500 Silicone purchased $24,000 Polypropylene used $ 6,000 Total conversion costs incurred $68,850 Ending inventory, cullets $ 4,500 Ending inventory, silicone $ 3,000 Number of bottles completed and transferred…arrow_forward
- Mary Jones and Jack Smart have joined forces to start M&J Food Products, a processor of packaged shredded lettuce for institutional use. Jack has years of food processing experience, and Mary has extensive commercial food preparation experience. The process will consist of opening crates of lettuce and then sorting, washing, slicing, preserving, and finally packaging the prepared lettuce. Together, with help from vendors, they think they can adequately estimate demand, fixed costs, revenues, and variable cost per 5-pound bag of lettuce. They think a largely manual process will have monthly fixed cost of $50,000 and a variable cost of $2.50 per bag. They expect to sell 75,000 bags of lettuce per month. They expect to sell the shredded lettuce for $3.25 per 5-pound bag. Jack and Mary has been contacted by a vendor to consider a more mechanized process. This new process will have monthly fixed cost of $125,000 per month with a variable cost of $1.75 per bag. Based on the above…arrow_forwardMary Jones and Jack Smart have joined forces to start M&J Food Products, a processor of packaged shredded lettuce for institutional use. Jack has years of food processing experience, and Mary has extensive commercial food preparation experience. The process will consist of opening crates of lettuce and then sorting, washing, slicing, preserving, and finally packaging the prepared lettuce. Together, with help from vendors, they think they can adequately estimate demand, fixed costs, revenues, and variable cost per 5-pound bag of lettuce. They think a largely manual process will have monthly fixed cost of $50,000 and a variable cost of $2.50 per bag. They expect to sell 75,000 bags of lettuce per month. They expect to sell the shredded lettuce for $3.25 per 5-pound bag. Jack and Mary has been contacted by a vendor to consider a more mechanized process. This new process will have monthly fixed cost of $125,000 per month with a variable cost of $1.75 per bag. Based on the above…arrow_forwardGolf courses are demanding in their quest for high-quality carts because of the critical need for lawn maintenance. Antaris Co. manufactures golf carts and is a recognized leader in the industry for quality products. In recent months, company managers have become more inter-ested in trying to quantify the company’s cost of quality. As an initial effort, the company identified the following annual costs by categories that are associated with quality. (See attached) Managers were also aware that 600 of the 19,200 carts produced had to be sold as seconds. These 600 carts were sold for $160 less profit per unit than “good” carts. Also, the company incurred rework costs amounting to $14,400 to sell 480 other carts through regular market channels.Using these data, calculate Antaris Co.’s expense for the following: 1. Lost profit from the 600 units $______ 2. Total failure cost $______ 3. Total quality cost $______arrow_forward
- AccountingAccountingISBN:9781337272094Author:WARREN, Carl S., Reeve, James M., Duchac, Jonathan E.Publisher:Cengage Learning,Accounting Information SystemsAccountingISBN:9781337619202Author:Hall, James A.Publisher:Cengage Learning,
- Horngren's Cost Accounting: A Managerial Emphasis...AccountingISBN:9780134475585Author:Srikant M. Datar, Madhav V. RajanPublisher:PEARSONIntermediate AccountingAccountingISBN:9781259722660Author:J. David Spiceland, Mark W. Nelson, Wayne M ThomasPublisher:McGraw-Hill EducationFinancial and Managerial AccountingAccountingISBN:9781259726705Author:John J Wild, Ken W. Shaw, Barbara Chiappetta Fundamental Accounting PrinciplesPublisher:McGraw-Hill Education