Interpretation:
Reducing agent that will reduce VO2+ to V3+ and no further in acidic solution should be determined.
Concept introduction:
Reducing agents tends to oxidize itself by reducing another component.
The one with highest standard reduction potential reduce 1st.
Reduction reaction at cathode;
In an
If oxidation takes place on an electrode, that electrode is called anode. The species in that electrode remove electrons and itself gets oxidized.
If reduction takes place on an electrode, that electrode is called cathode. The species in that electrode absorbs electrons and itself gets reduced.
The electrode potential of cell can be calculated as follows:
Want to see the full answer?
Check out a sample textbook solutionChapter 23 Solutions
General Chemistry: Principles and Modern Applications (11th Edition)
- An aqueous solution of an unknown salt of vanadium is electrolyzed by a current of 2.50 amps for 1.90 hours. The electroplating is carried out with an efficiency of 95.0%, resulting in a deposit of 2.850 g of vanadium. a How many faradays are required to deposit the vanadium? b What is the charge on the vanadium ions (based on your calculations)?arrow_forwardAn aqueous solution of an unknown salt of gold is electrolyzed by a current of 2.75 amps for 3.39 hours. The electroplating is carried out with an efficiency of 93.0%, resulting in a deposit of 21.221 g of gold. a How many faradays are required to deposit the gold? b What is the charge on the gold ions (based on your calculations)?arrow_forwardA galvanic cell is based on the following half-reactions: In this cell, the copper compartment contains a copper electrode and [Cu2+] = 1.00 M, and the vanadium compartment contains a vanadium electrode and V2+ at an unknown concentration. The compartment containing the vanadium (1.00 L of solution) was titrated with 0.0800 M H2EDTA2, resulting in the reaction H2EDTA2(aq)+V2+(aq)VEDTA2(aq)+2H+(aq)K=? The potential of the cell was monitored to determine the stoichiometric point for the process, which occurred at a volume of 500.0 mL H2EDTA2 solution added. At the stoichiometric point, was observed to be 1 .98 V. The solution was buffered at a pH of 10.00. a. Calculate before the titration was carried out. b. Calculate the value of the equilibrium constant, K, for the titration reaction. c. Calculate at the halfway point in the titration.arrow_forward
- Answer the following questions by referring to standard electrode potentials at 25C. a Will oxygen, O2, oxidize iron(II) ion in solution under standard conditions? b Will copper metal reduce 1.0 M Ni2(aq) to metallic nickel?arrow_forwardAn electrode is prepared from liquid mercury in contact with a saturated solution of mercury(I) chloride, Hg2Cl, containing 1.00 M Cl . The cell potential of the voltaic cell constructed by connecting this electrode as the cathode to the standard hydrogen half-cell as the anode is 0.268 V. What is the solubility product of mercury(I) chloride?arrow_forwardUse Table 17.1 to select (a) a reducing agent in acidic solution that converts ClO3- to Cl2 but not Cr2O72- to Cr3+. (b) an oxidizing agent that converts Mg to Mg2+ but not Mn to Mn2+. (c) a reducing agent in basic solution that converts NO2- to NO3- but not OH- to O2.arrow_forward
- Given the following two standard reduction potentials, solve for the standard reduction potential of the half-reaction M3++eM2+ (Hint: You must use the extensive property G to determine the standard reduction potential.)arrow_forwardAn electrode is prepared by dipping a silver strip into a solution saturated with silver thiocyanate, AgSCN, and containing 0.10 M SCN . The cell potential of the voltaic cell constructed by connecting this electrode as the cathode to the standard hydrogen half-cell as the anode is 0.45 V. What is the solubility product of silver thiocyanate?arrow_forwardElectrolysis of a solution of CuSO4(aq) to give copper metal is carried out using a current of 0.66 A. How long should electrolysis continue to produce 0.50 g of copper?arrow_forward
- Order the following oxidizing agents by increasing strength under standard-state conditions: Mg2+(aq), Hg2+(aq), Pb2+(aq).arrow_forwardOrder the following oxidizing agents by increasing strength under standard-state conditions: O2(g); MnO4(aq); NO3 (aq) (in acidic solution ).arrow_forwardAn electrochemical cell is made by placing a zinc electrode in 1.00 L of 0.200 M ZnSO4 solution and a copper electrode in 1.00 L of 0.0100 M CuCl2 solution. a What is the initial voltage of this cell when it is properly constructed? b Calculate the final concentration of Cu2+ in this cell if it is allowed to produce an average current of 1.0 amp for 225 s.arrow_forward
- General Chemistry - Standalone book (MindTap Cour...ChemistryISBN:9781305580343Author:Steven D. Gammon, Ebbing, Darrell Ebbing, Steven D., Darrell; Gammon, Darrell Ebbing; Steven D. Gammon, Darrell D.; Gammon, Ebbing; Steven D. Gammon; DarrellPublisher:Cengage LearningChemistry: Principles and ReactionsChemistryISBN:9781305079373Author:William L. Masterton, Cecile N. HurleyPublisher:Cengage Learning
- ChemistryChemistryISBN:9781305957404Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCostePublisher:Cengage LearningChemistry: An Atoms First ApproachChemistryISBN:9781305079243Author:Steven S. Zumdahl, Susan A. ZumdahlPublisher:Cengage LearningChemistry & Chemical ReactivityChemistryISBN:9781337399074Author:John C. Kotz, Paul M. Treichel, John Townsend, David TreichelPublisher:Cengage Learning