Concept explainers
(a)
Magnitude of maximum angular velocity of bar
Answer to Problem 19.107P
The maximum angular velocity of bar AB is
Explanation of Solution
Given:
Mass of attached sphere is
Spring constant is
Vertical deflection is
Maximum amplitude of deflection is
Frequency of rotation is
Concept used:
Draw the FBD for bar AB in equilibrium state.
After giving small deflection to bar AB, Draw FBD of bar AB
Draw the equivalent kinetic diagram for bar AB as.
Write the expression for displacement of point C in terms of angular displacement.
Here,
Write the expression for displacement of point B in terms of angular displacement.
Here,
Substitute
Take moment about point A for equilibrium position.
For static equilibrium substitute
Simplify the above expression.
Here,
Take moment about point A after giving the angular displacement.
Substitute
Substitute
Substitute
Substitute
Substitute
Rearrange the above expression as.
Here,
Write the standard equation of motion as.
Compare the coefficient of
Compare the coefficient of
Write the expression for maximum amplitude of force.
Here,
Write the expression for natural frequency of system.
Here,
Write the expression for the amplitude of vibration of sphere B.
Here,
Write the expression for magnitude of maximum angular velocity of bar AB.
Here,
Calculation:
Substitute
Substitute
Substitute
Substitute
Substitute
Substitute
The maximum angular velocity of bar AB is
Conclusion:
Thus, the maximum angular velocity of bar AB is
(b)
Magnitude of maximum acceleration of sphere
Answer to Problem 19.107P
The maximum acceleration of sphere is
Explanation of Solution
Concept used:
Write the expression for maximum acceleration of sphere.
Here,
Calculation:
Substitute
The maximum acceleration of sphere is
Conclusion:
Thus, the maximum acceleration of sphere is
Want to see more full solutions like this?
Chapter 19 Solutions
Vector Mechanics For Engineers
- A slender homogeneous rod AB of mass m and length L is made to rotate at a constant rate w2 about the horizontal z axis, while frame CD is made to rotate at the constant rate w1 about the y axis. Express as a function of the angle 0 (a)the couple M1 required to maintain the rotation of the frame, (b) the couple M2 required to maintain the rotation of the rod, (C) the dynamic reactions at the supports C and D.arrow_forwardA 1.6-kg tube AB can slide freely on rod DE which in turn can rotate freely in a horizontal plane. Initially the assembly is rotating with an angular velocity of magnitude w = 5 rad/s and the tube is held in position by a cord. The moment of inertia of the rod and bracket about the vertical axis of rotation is 0.30 kg.m2 and the centroidal moment of inertia of the tube about a vertical axis is 0.0025 kg.m2If the cord suddenly breaks, determine (a) the angular velocity of the assembly after the tube has moved to end E, (b) the energy lost during the plastic impact at E.arrow_forwardA homogeneous disk of weight W = 6 lb rotates at the constant rate w1 = 16 rad/s with respect to arm ABC, which is welded to a shaft DCE rotating at the constant rate w2 = 8 rad/s. Determine the dynamic reactions at D and E.arrow_forward
- A 240-lb block is suspended from an inextensible cable which is wrapped around a drum of 1.25-ft radius rigidly attached to a flywheel. The drum and flywheel have a combined centroidal moment of intertia of 10.5 lb-ft-s^2. At the instant shown, the velocity of the block is 6 ft/s directed downward. The bearing at A as a frictional moment of 60 lb-ft. What is the kinetic energy of the system after the block moved after 4ft? (in ft-lb)arrow_forwardInside a machine, two gears, A and B, HINGED at their centers, are meshed with each other such that gear A transmits torque and speed to gear B. Gear A has a mass mA=2 kg, radius rA=175 mm, and radius of gyration kA=150 mm. Gear B has a mass B=5 kg, radius rB=525 mm, and radius of gyration kB=400 mm. From rest, a counter-clockwise couple M of constant magnitude 6 Nm is applied to Gear A. Which of the following is closest to the magnitude of the angular acceleration of gear B, in radians per square seconds (rad/s2)?3.0044.814.9445.6arrow_forwardTwo disks each have a mass of 5 kg and a radius of 300 mm. They spin as shown at the rate of w1 = 1200 rpm about a rod AB of negligible mass that rotates about the horizontal z axis at the rate of w2. Determine the maximum allowed value of w2 if the magnitudes of the dynamic reactions at points C and D are not to exceed 350 N each.arrow_forward
- A locomotive consists of multi cylinder reciprocating engine running at a speed of 8 r.p.s having a stroke length of 29cm, which carries a mass of reciprocating part whose magnitude is 11kgs with a revolving part of 5kgs rotating at 17cm radius. If two third of the reciprocating parts and all the revolving parts are to be balanced, determine the following when the crank has rotated 500 from top dead centre to bottom dead centre. solve 4 and 5 1. Maximum primary unbalanced force of reciprocating mass in newtons 2. Balancing mass required at a radius of 41cm in kgs 3. Variation of maximum & minimum tractive force in newtons 4. Variation of maximum & minimum swaying couple for the given centre distance 76cm between the two cylinders in (N-m) 5. Magnitude…arrow_forwardThe 10-oz disk shown spins at the rate w1 = 750 rpm, while axle AB rotates as shown with an angular velocity w2. Determine the maximum allowable magnitude of w2 if the dynamic reactions at A and B are not to exceed 0.25 lb each.arrow_forwardTwo blocks each have a mass 1.5 kg and are attached to links that are pin-connected to bar BC as shown. The masses of the links and bar are negligible, and the blocks can slide without friction. Block D is attached to a spring of constant = 720 N/m. Knowing that bloc k = 720 N/m. Knowing that block A is at rest when it is struck horizontally with a mallet and given an initial velocity of 250 mm/s, determine the magnitude of the maximum displacement of block D during the resulting motion.arrow_forward
- Consider a rigid body initially at rest and subjected to an impulsive force F contained in the plane of the body. We define the center of percussion P as the point of intersection of the line of action of F with the perpendicular drawn from G(a) Show that the instantaneous center of rotation C of the body is located on line GP at a distance GC = k2/GP on the opposite side of G. (b) Show that if the center of percussion were located at C, the instantaneous center of rotation would be located at P.arrow_forwardA shaft carries four masses, B, C, and D of magnitude 200 kg, 300 kg, 400 kg, and 200 kg respectively and revolving at radii 80 mm, 70 mm, 60 mm, and 80 mm in planes measured from A at 300 mm, 400 mm and 700 mm. The angles between the cranks measured anticlockwise are A to B 45º, B to C 70º, and C to D 120º. the balancing masses are to be placed in planes X and Y. The distance between the planes A and X is 100 mm, between X and Y is 400 mm and between Y and D is 200 mm. If the balancing masses revolve at a radius of 100 mm, find their magnitude and angular positions.arrow_forwardA radius drum is connected to a disk of radius ra. The combined mass of the disc and the drum is m and the combined radius of rotation (radius of inertia) is k and is suspended by two cables.Knowing that the force in the wires is Ta and, determine the accelerations of points A and B on the wire? (m6 kg ra=0,160 rb = 0,210 k = 0,125 ta= 75 tb= 50)arrow_forward
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY