When installing a new release bearing, Technician A says the outer surface of the transmission's front bearing retainer should be lubricated. Technician B says the release lever and pivot shuold be lubricated who is correct? a. techincian A b. Technician B c. both A and B d. Neither A or B

When installing a new release bearing, Technician A says the outer surface of the transmission's front bearing retainer should be lubricated. Technician B says the release lever and pivot shuold be lubricated who is correct? a. techincian A b. Technician B c. both A and B d. Neither A or B

Automotive Technology

7th Edition

ISBN:9781337794213

Author:ERJAVEC, Jack.

Publisher:ERJAVEC, Jack.

Chapter5: Hand Tools And Shop Equipment

Section: Chapter Questions

Problem 14MC: Technician A says that jack stands should always be used with portable floor jacks. Technician B...

See similar textbooks

Related questions

Q: Q1- Explain the duties of camshaft, distributor and alternator, which are among the engine parts

A: Camshaft Camshaft is the shaft at which many cams are connected and it operates with the crankshaft.…

Q: An engine may be equipped with all the following belts, except? Select one: a. A serpentine belt b.…

A: Given that An engine may be equipped with all the following belts, except? Select one: a. A…

Q: Explain the benefits of dynamic testing of automatic transmission fluid

A: Automatic transmission fluid: It is a type of fluid which is used in vehicle for self-shifting and…

Q: Which of the following screwdrivers is like a Phillipsbut has a flatter and blunter tip?a.…

A: Screwdriver tip with conical sides and the Phillips screw symbol A cross-head screw with parallel…

Q: vards the left on the slider. The I 0 mm. Ignoring the effect of grav ankshaft torque (in Nm) needed

A: GIVEN:l=70mmr=30mmθ=450

Q: List 5 Manual-Transmission Troubles and described each.

A: Please find the answer below

Q: What are the 4 main function of the clutch?

Q: When discussing the various gear positions of a transfer case, Technician A says that when the…

A: Transfer case is used to switch from two wheel drive to four wheel drive and vice versa. It also…

Q: While discussing the fail-safe function: Technician A says that the 4WS indicator light is…

A: The statement given by technician A is correct as when the fail-safe function that is when the any…

Q: 2. Technician A says that load-carrying ball joints should always have some play in them. Techni-…

A: The ball joints basically serve as the pivot point between the tyre and the suspension in an…

Q: What determines whether a conventional transmission or a transaxle is used?

A: Manual transmissions feature a foot-operated clutch pedal and a shifter that allows the driver to…

Q: Technician A says that double-cone synchronizers have friction material on both sides of the…

A: Technician A says that double-cone synchronizers have friction material on both sides of the…

Q: A clicking noise during transmission/transaxle operation may be an indication of .

A: Given data Why clicking noise during transmission transaxle operation is the indication of ..?

Q: Briefly explain how a diaphragm clutch works.

A: Note:- As per our guidelines we are supposed to answer only one question. Kindly repost other…

Q: Which of the following is part of the sprung weight ofa vehicle?a. Steering linkageb. Tiresc.…

A: A vehicle’s sprung weight is supported by springs of one kind of or another (coiled springs, air…

Q: Why is mixing different manufacturer’s bearings typically not recommended?

A: Bearing: It is a mechanical element or part which allows the relative motion between two parts and…

Q: How are problems normally first noticed with the differentialand drive axles?

A: SYMPTOMS OF A DAMAGED DIFFERENTIAL Other components may show signs of damage when your vehicle has…

Q: Three factors to consider before deciding to apply a transmission of gear drives

Q: Why do we need to diagnose the transmission/transaxle failure?

A: It is very important to diagnose the transmission failures in any vehicle.There are many factors…

Q: technician a says that an oil-soaked clutch dis can cause clutch chatter technician b says that…

A: Solution:

Q: Insufficient clutch pedal clearance results in_ _ _ _ _ _ _ _ _ .a. gear clashing while shifting…

A: Answer is option C

Q: Technician A says that limited- slip differential clutch packs are designed to slip when the vehicle…

A: Limited-slip differential clutch packs is a modification to the regular differential mechanism. LSD…

Q: Which of the following is a good definition of SAI?a. Forward tilt of the top of the steering…

A: Given Data : SAI

Q: Shift linkage enclosed within the transmission or transaxle case is called as 1) external linkage 2)…

A: Column Shift: In a column shift there is a rod which connects the handle with the lever attached at…

Q: when discussing shift problems, technician A says that worn or broken engine and transaxle mounts…

A: The explanation of technician A is correct because the shifting problems may cause due to worn or…

Q: Which of the following is NOT true about the initial tension in a flat belt drive? OA. It should be…

A: A spherical joint is also known as ball and socket joint, allows three relatives rotation between…

Q: The clutch friction disc always rotates with the

Q: Technician A says hypoid gearset are only used in RWD vehicle drivetrains. Technician B says hypoid…

A: Hypoid gear is spiral bevel gear in which the axes doesn't intersect and it is not parallel. This…

Q: When reviewing the service procedures for CV joints and drive axles, Technician A says that the axle…

A: The axle can be used as a slide hammer to help remove a stubborn inboard joint from the transaxle as…

Q: While discussing transmission adaptive learning: Technician A says that the transmission learns to…

A: Transmission Adaptive learning:-The automatic transmission is designed in such a way that it has a…

Q: When reviewing the procedure for replacing an axle boot, Technician A says that the position of the…

A: Understand that when the old boot is removed the new boot is used to replace the old one at the same…

Q: 128) Technician A says slide hammer pullers are usually required to remove the front pump from the…

A: A slide hammer puller is a mechanical tool with a long round shaft. It has a hammer weight slides. A…

Q: Technician A says a wheel alignment rack should include rear slip plates. Technician B says a four…

A: During the alignment lift operation, it is necessary to take off slip plates. To give a better wheel…

Q: The drive shaft component that provides a means ofconnecting two or more shafts together is the __…

A: Various types of joints are used to join the shaft with each other to transmit power from one shaft…

Q: While inspecting a planetary gear-type final drive, Technician A says blackened pinion shafts…

A: Technician A is right as blackened pinion is a sign of overloading and are used as indicators of…

Q: number of pe f the pinion

Q: list five checks that should be made during the visual inspection of the parts of a…

A: The mechanism with he help of which the power generated inside the engine transmitted to the wheels…

Q: Explain any one type of coupling which can be used to connect two aluminum alloy shafts when there…

A: Oldham Coupling is used to connect the two shafts which are in lateral misalignment.

Q: Is the car clutch failed due to static load or cyclic load?

A: Given data Is the car clutch failed due to static load or cyclic load.

Q: mm - The mating shaft has a clearanc

Q: The knocking is usually occurred at the low engine speed O a. True O b. False

A: True

Q: Which of the following screwdrivers is like a Phillips but has a flatter and blunter tip? a.Standard…

A: Given Data : Screwdrivers Phillips

Q: On most vehicles, the automatic adjuster cablesor levers are ___.a. installed on the secondary…

A: Given Data : Automatic adjuster cables

Q: When discussing shift problems,Technician A says that worn or broken engine and transaxle mounts can…

A: Transaxle generally faces the same failure and shifting mechanism as the transmission system in the…

Q: What type of axle housing resembles a banjo?

A: Given Data : Banjo

Q: What safety precautions must be observed when carrying out diagnosing procedure on drive shafts?

A: Depending on the performance outcome, the correct diagnose required in the drive shaft of the light…

Q: Technician A says that shift solenoids direct fluid flow to and away from the apply devices in the…

A: The basic function of shift solenoids is to control the pressures within fluid system and they don’t…

Question

When installing a new release bearing, Technician A says the outer surface of the
transmission's front bearing retainer should be lubricated. Technician B says the release lever and pivot shuold be lubricated who is correct? a. techincian A b. Technician B c. both A and B d. Neither A or B

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1 Introduction

VIEW

Step 2 Solution

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

When reviewing the procedure for replacing an axle boot, Technician A says that the position of the old boot should be marked on the shaft before removing it. Technician B says that if the boot is dimpled or collapsed after the new boot is installed, a dulled screwdriver should be used to allow air to enter the boot. Who is correct? O a. A only O b. B only O c. Both A and B O d. Neither A nor B
The CV joint boots on the left side of a vehicle appear to be squeezed together; the boots on the right side of the vehicle appear to be stretched apart. Technician A says that one or more of the engine/transaxle's mounts may be broken. Technician B says that one or more of the engine/transaxle's subframe mounts may be broken. Who is correct? O a. A only O b.B only C. Both A and B O d. Neither A nor B
From the following identify a true statement regarding the adjustment of drive belt tension. a. Less than 8 mm should be the correct a deflection for each belt which is under tension b. More than 6 mm should be the correct a deflection for each belt which is under tension c. More than 8 mm should be the correct a deflection for each belt which is under tension. d. More than 6 mm and less than 8 mm should be the correct a deflection for each belt which is under tension.
A discussion concerning CV joint testing is being held. Technician A says that a recommended method to check CV joints is to raise the vehícle so that the lower control arms are hanging freely; at this point the engine can be accelerated while noise checks can be performed. Technician B says that the vehicle should be road tested so that the CV joints can be checked under load. Who is correct? O a. A only O b. B only c. Both A and B d. Neither A nor B
When examining disc brakes: Technician A visually inspects the rotor and says that the rotor can be reused if it is not damaged or scored. Technician B says that it is normal for the inboard pad to be slightly more worn than the outside pad. Who is correct? a. Technician A only b. Technician B only c. Both A and B d. Neither A nor B
Technician A says that the piston seal retracts the caliper piston when hydraulic pressure is released. Technician B says that a return spring is used to retract a caliper piston. Who is correct?
A vehicle makes a loud clicking sound during a left turn; during a right turn, the clicking noise is still apparent but is less pronounced. Technician A says that the left inner CV joint may be the source of the noise. Technician B says that the left outer CV joint may be causing the noise. Who is correct? O a. A only Ob.B only O c. Both A and B O d. Neither A nor B
Technician A says that some small cracks in the accessory drive belt may be within tolerance. Technician B says that serpentine belts can be checked with a wear gauge. Who is correct? Select one: a. Technician A only b. Technician B only C. Both A and B d. Neither A nor B
Technician A uses a micrometer to measure the connectingrod journal for taper. Technician B uses amicrometer to measure the connecting rod journalfor out-of-roundness. Who is correct?a. Technician Ab. Technician Bc. Both A and Bd. Neither A nor B
While discussing the different types of pressureplates: Technician A says that coil spring types arecommonly used because they have strong springs.Technician B says that Belleville-type pressure platesare not commonly used because they require excessivespace in the bell housing. Who is correct?a. Technician A onlyb. Technician B onlyc. Both A and Bd. Neither A nor B
Which of the following is considered as the purpose why bearings are lubricated? a. To protect the bearing component from corrosion. b. To carry heat away from the bearing unit c. To help dissipate heat from the bearing unit. d. To provide low-friction film at the point of contact of rolling elements. e. All of the above.
When reviewing the service procedures for CV joints and drive axles, Technician A says that the axle can be used as a slide hammer to help remove a stubborn inboard joint from the transaxle. Technician B says that a drive axle should never be allowed to hang by its own weight during removal or installation. Who is correct? O a. A only Ob.B only O c. Both A and B O d. Neither A nor B