Why do we need to diagnose the transmission/transaxle failure?
Q: Question: How can we change the pressure valve of the hydraulic transmission system?
A: A hydraulic power transmission system uses a pressured flow to transport the energy needed to…
Q: What are the suggestions to prevent the occurrence of failures in car clutch?
A: Suggestion to prevent the occurrence of failure in car clutch: 1. Unnecessarily do not press the…
Q: single step-up spur gearbox
A: To find ; Formula and standards relevant to the single step-up spur gearbox.
Q: List 5 Manual-Transmission Troubles and described each.
A: Please find the answer below
Q: 81) Technician A says the quality and feel of a transmission shift depends on the amount of slippage…
A:
Q: List at least five separate checks that should be made during the visual inspection of tje…
A: The transmission/transaxle are visually inspected after a certain interval of time. This method of…
Q: When discussing shift problems, Technician A says that worn or broken engine and transaxle mounts…
A: A chain of gears which is used to pass on the power to the wheel from the engine is called as…
Q: What determines whether a conventional transmission or a transaxle is used?
A: Manual transmissions feature a foot-operated clutch pedal and a shifter that allows the driver to…
Q: Technician A says that an in-line six-cylinder diesel engine is usually longer and heavier than a V8…
A:
Q: While discussing the various types of transmissions found on today’s vehicles: Technician A says…
A: Sliding collar transmission-In sliding collar transmission we must move a fork which engage or…
Q: A clicking noise during transmission/transaxle operation may be an indication of .
A: Given data Why clicking noise during transmission transaxle operation is the indication of ..?
Q: Technician A says hydraulic pressure affects transmission shift points. Technician B says hydraulic…
A: Affects of hydraulic Pressure : When hydraulic fluid enters into the bore of the cylinder it forces…
Q: A car jumps out of gear into neutral, particularlywhen decelerating or going down hills: Technician…
A: The gear system in the cars is used to transmit the power from the engine to the wheels as per the…
Q: How are problems normally first noticed with the differentialand drive axles?
A: SYMPTOMS OF A DAMAGED DIFFERENTIAL Other components may show signs of damage when your vehicle has…
Q: Interaxle differentials are being discussed. Technician A says the interaxle differential is located…
A: It is an separate differential gear box that locks the first and second differential in a tandem…
Q: Insufficient clutch pedal clearance results in_ _ _ _ _ _ _ _ _ .a. gear clashing while shifting…
A: Answer is option C
Q: What can throttle pressure be used for in automatic transmission?
A: The throttle pressure in an automatic transmission is used to control and lubricate the…
Q: 108) Technician A says that engine management malfunctions may be misinterpreted as transmission…
A: Engine management malfunctions can be seen by malfunction indicator lamp . this indicator shows that…
Q: List four possible causes of cluth slippage
A: A Clutch is a mechanical device used in vehicles that transmits power from the motor to the…
Q: the number one cause of clutch disc failure
A: Clutch :- The function of a clutch is to transmit the power from rotating shaft or motor or engine…
Q: How is the speed of gearless traction elevator drive mechanisms varied?
A: In a gearless traction elevator, the speed of motor and also the speed of rotation of traction…
Q: When the clutch is disengaged, the power flow stops at the.a. transmission input shaftb. driven disc…
A: The clutch fork moves the release bearing toward the flywheel to disengage the clutch. As soon as…
Q: An engine support fixture is used to hold the engine in place while removing a ______. A. fwd…
A: The fixture is a simple device used to hold the work, and sometimes it supports the work to its…
Q: A discussion concerning CV joint testing is being held. Technician A says that a recommended method…
A: CV Joint: CV joint means Constant Velocity Joint. They are used to transfer the power in a variable…
Q: Explain the role of shift rails and shift forks in theoperation of a transmission or transaxle.
A: In a manual transmission, shift forks align the synchronizers that change gears with the intended…
Q: structural analysis and assembly of gearbox
A: Structural Analysis of gearbox Nature of loading within the various components of a gear box is an…
Q: (b) Why are the clutch friction plates perforated? What is the purpose of installing coil springs in…
A: Clutch friction plates are perforated for coolant passage for heat dissipation. Perforation helps in…
Q: On an electronically controlled transmission list 5 things that could cause incorrect shift times…
A: In and electronically transmission system is the best transmission system as it gives proper engine…
Q: Composition of manual transmission
A: Changing aesthetic sensibilities and a demand for high performance ushered in a development in…
Q: History of manual transmission
A: The first manual gearbox was created by Emile Levassor and Louis-Rene Panhard. The original…
Q: Why do we need to follow the precautionary measures and safety procedures when performing…
A: One-third of the total injuries are occurred due to manual handling. Various disorders such as…
Q: Which of the following is probably not the cause of avibrating clutch?a. Excessive crankshaft end…
A: (a) Excessive crankshaft end play is cause of knocking sound when we use clutch. But Vibrating…
Q: list five checks that should be made during the visual inspection of the parts of a…
A: The mechanism with he help of which the power generated inside the engine transmitted to the wheels…
Q: True or False? In most transmissions and transaxles,there is one synchronizer assembly for each…
A: Given Synchronizer for gear speed To find Verify the statement
Q: Technician A says that some manual transmissions use 85/90 weight gear oil or synchromesh…
A: Technician A says that some manual transmissions use 85/90 weight gear oil or synchromesh…
Q: When installing a new release bearing, Technician A says the outer surface of the transmission's…
A: The bearing is the rotating element that is used to transmit the rotary motion. Bearing are of…
Q: Technician A believes the stall test damages transmissions. This includes the torque converter…
A: Stakk test is a short time full-throttle operation with the vehicle brakes fully applied and the…
Q: What tool is often needed to remove gears and synchronizer assemblies from the…
A: There are different types of tools are used to remove the gears and synchronizer assemblies from the…
Q: What is the importance of studying on how to pull-out and mount manual transmission?
A: Manual transmission is a mechanism that enables a vehicle driver to choose the gear ratio of his…
Q: What is the importance of studying how to perform assemble/disassemble manual transmission?
A: Manual transmission is also known as multi-speed transmission which involves in gear change in the…
Q: What safety precautions must be observed when carrying out diagnosing procedure on drive shafts?
A: Depending on the performance outcome, the correct diagnose required in the drive shaft of the light…
Q: Why is it important to loosen the cylinder head bolts in the recommended order
A: Cylinder heads have different shapes and configurations, each possesses their specific procedure to…
Q: List at least three causes of noise that are not transmission related but may appear to be
A: In the transmission systems, noise is one of the biggest concern. Noise is used to identify the…
Q: The worm wheel rim is made of copper for A.Easy to manufacture B.Stable transmission C.High…
A:
Q: While diagnosing the cause of TCC shudder: Technician A checks the fluid pressure sent to the…
A: The shudder in TCC occurs due to engagement of clutch before the time of application and during the…
Step by step
Solved in 2 steps
- When servicing transfer cases, all of the following are correct, except_____. a. it must be supported on a transmission jack or safety stands b. the chain drive and a planetary gearset must be adjusted to specifications c. visual inspections for leaks and damage are necessary d. follow the manufacturers recommendations for lubricantsExplain the benefits of dynamic testing of automatic transmission fluidlist five checks that should be made during the visual inspection of the parts of a transmission/transaxle.
- Question 1 The coefficient of efficiencies between different transmission elements are not usually at the same value. Table 1 below, shows the efficiencies of different transmission elements. Analyze table 1 and answer the questions below. Table 1: Coefficient of Efficiencies between the transmission elements Coefficient Types of Transmission or Support of Efficiency Belt Drive with flat belt 0.98 Belt drive with V-Belt 0.96 Spur Gear drive Helical Gear Drive 0.98 0.97 Bevel Gear Drive 0.96 Ball or Roller Bearing 0.995 Crank and Slider mechanism Jaw Clutch Multiple-disc friction clutch operating in oil 0.9 0.95 0.9 a) How are these coefficient values are calculated? b) Base on your analysis, why the value of Belt Drive with V-Belt is having a lower coefficient compared to flat belt? c) Define the highest coefficient of efficiency and state one (1) reason of why.81) Technician A says the quality and feel of a transmission shift depends on the amount of slippage that occurs when a band or clutch is applied. Technician B says ATF uses friction-modifiers to control the amount of slippage that occurs when a band or clutch is applied. Who is correct? O Technician A O Technician B Both technicians A and B Neither technician A пог В108) Technician A says that engine management malfunctions may be misinterpreted as transmission malfunction. Technician B says that imbalance in driveline components or wheels may be a likely cause of vibration. Which technician is correct? O Technician A O Technician B O Both technicians A and B O Neither technician A nor B
- What three alignment checks should be made to ensure satisfactory and long service for directly coupled and belt-coupled power transmissions?Hello, Can someone help answer these questions about suspension systems? Thank youTechnician A says that a prerequisite to accurate road-testing analysis is knowing what planetary controls are applied in a particular gear range. Technician B says that all slipping conditions can be traced to a leaking hydraulic circuit. Who is correct? a. Technician A only b. Technician B only c. Both A and B d. Neither A nor B