Find the pore water pressure at failure for the unconfined specimen.

Question

A consolidated-undrained tri-axial test was conducted on a normally conslidated clay sample and the results are follows: Chamber confining pressure= 119kpa Deviator Stress at failure=90 kpa Pore water pressure= 58kpa These results were used to determine the drained friction angle of the soil. Compute the deviator stress (kpa) at failure when the drained test was conducted with the chamber confining pressure changed to 156 kpa. Use stored value. Answer to 5 decimal places.

Answer 1

Question

Chapter 12, Problem 12.7P

To determine

Find the pore water pressure at failure for the unconfined specimen.

Expert Solution & Answer

Trending nowThis is a popular solution!

See solution

Check out sample textbook solution

Students have asked these similar questions

A consolidated-undrained tri-axial test was conducted on a normally conslidated clay sample and the results are follows: Chamber confining pressure= 119kpa Deviator Stress at failure=90 kpa Pore water pressure= 58kpa These results were used to determine the drained friction angle of the soil. Compute the deviator stress (kpa) at failure when the drained test was conducted with the chamber confining pressure changed to 156 kpa. Use stored value. Answer to 5 decimal places.

A consolidated undrained tri-axial test was conducted on a normally consolidated clay sample and the results are as follows: chamber confining pressure = 110kpa deviator stress at failure = 96kpa pore water pressure = 66kpa these test results were used to determine the drained friction angle of the soil. compute the deviator stress in (kpa) at failure when the drained test was conducted with the chamber confining pressure changed to 163kpa.

A clay sample was consolidated in a triaxial cell under a backpressure of 50 kPa and cell pressure of 150 kPa. The drainage valve was then closed and the cell pressure was increased to 200 kPa when the pore pressure increased to 98 kPa. What is Skempton’s B-parameter? The above sample was then subjected to a vertical deviator stress, which was increased from zero under undrained conditions. The sample failed when the pore water pressure was 160 kPa and the deviator stress was 70 kPa. What is Skempton’s A-parameter at failure? Assuming the clay is normally consolidated, find the friction angle in terms of effective stresses.