A liquid limit test on a clay was performed with the following results. The natural water content of the clay is 38% and plastic limit is 21%. Number of Blows 6 12 20 28 32 Water content (%) 52.5 47.1 42.3 38.6 37.5 What is the plasticity index of this clay? (Use Interpolation) Group of answer choices 15.74% 18.99% 18.85% 17.63%

A liquid limit test on a clay was performed with the following results. The natural water content of the clay is 38% and plastic limit is 21%. Number of Blows 6 12 20 28 32 Water content (%) 52.5 47.1 42.3 38.6 37.5 What is the plasticity index of this clay? (Use Interpolation) Group of answer choices 15.74% 18.99% 18.85% 17.63%

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter4: Plasticity And Structure Of Soil

Section: Chapter Questions

Problem 4.6P: Refer to the soil in Problem 4.5. Using the Casagrande plasticity chart, graphically estimate the...

See similar textbooks

Similar questions

A liquid limit test on a clay was performed with the following results. The natural water content of the clay is 38% and plastic limit is 21%. Number of Blows 6 12 20 28 32 Water content (%) 52.5 47.1 42.3 38.6 37.5 What is the liquid limit of this clay? (Use Interpolation) Group of answer choices 39.85% 39.99% 36.74% 38.63% Please answer this asap for upvote. Thanks
4.15 The following results were obtained from a liquid limit test on a clay using the Casagrande cup device. Number of blows 6 12 20 28 32 Water content (%) 52.5 47.1 43.2 38.6 37.0 (а) Determine the liquid limit of this clay. (b) If the natural water content is 38% and the plastic limit is 23%, calculate the liquidity index. (c) Do you expect a brittle type of failure for this soil? Justify your answer.
Q3. A 1200 g sample of Gravel in the SSD condition in air and weighed 770 g when immersed in water. Also, a 500 g sample of Sand in the SSD condition in air and weighed 300 g when immersed in water Calculate the BSG(SSD) of the sand and gravel 1) the BSG (SSD) of the Gravel * 1.2.791 2.4.71 3.3.703 4.2.50 2) the BSG (SSD) of the Sand * 1.2.221 2.3.590 3.2.500 4.3.232 Choose one answer and write the answer number for me
A hydrometer test was conducted on the material passing sieve No, 200 and the results are listed in the table below, The results of sieve analysis on the soil showed that the percentage passing No. 4 was 90 % and that passing No. 200 was 20 %. Estimate the clay size fraction in the soil. Table : Results of hydrometer test diameter (mm) 0.0700 0.0400 0.0150 0.0020 % finer (combined) 19 finer 95 80 16 65 13 45 0.0010 30 6 Select one:
The following results were obtained from a liquid limit test on a clay using the Casagrande cup device. Number of blows Moisture content (%) 6 12 20 28 32 52.5 47.1 43.2 38.6 37.0 a) Determine the liquid limit b) If the natural water content is 38% and the plastic limit is 23%, calculate the liquidity index. c) Would you expect a brittle failure? WHY?
5.5 The modified Proctor test (ASTM D 698, method C) was performed for a soil with G, = 2.70, and the results are as follows: Moist Weight in Mold, gf Water Content, % 6.5 3250 9.3 3826 12.6 4293 14.9 4362 17.2 4035 18.6 3685 (d) What is y at wopi? (e) What is the range of water content if the relative compaction (R.C.) is required to be 95% of the modified Proctor Ya.max?
Refer to the soil in Problem 4.5. Using the Casagrande plasticity chart, graphically estimate the shrinkage limit of the soil as shown in Figure 4.22. 4.5 The following data were obtained by conducting liquid limit and plastic limit tests on a soil collected from the site. Liquid limit tests: Plastic limit test: PL = 19.3% a. Draw the flow curve and determine the liquid limit. b. Using the Casagrande plasticity chart (Figure 4.21), determine the soil type.
An ASTM D 854 test was done on a sand. The data are shown below. Calculate the specific gravity. Mass of pychnometer = 46.1 grams Mass of pychnometer and dry soil = 67.4 grams Mass of pychnometer, dry soil and water = 157.7 grams Mass of pychnometer and water = 140.9 grams
5.5 The modified Proctor test (ASTM D 698, method C) was performed for a soil with G, = 2.70, and the results are as follows: Moist Weight Content, % in Mold, gf Water 6.5 3250 9.3 3826 12.6 4293 14.9 4362 17.2 4035 18.6 3685 (a) Plot the Ya versus w relation. (b) Determine Ya,max and wopt- (c) Calculate S and e at the maximum dry unit weight point.
5.5 The modified Proctor test (ASTM D 698, method C) was performed for a soil with G, = 2.70, and the results are as follows: Moist Weight in Mold, gf Water Content, % 6.5 3250 9.3 3826 12.6 4293 14.9 4362 17.2 4035 18.6 3685 (a) Plot the Ya versus w relation. (b) Determine Ya,max and wopt- (c) Calculate S and e at the maximum dry unit weight point. (d) What is Y, at Wopt? What is the range of water content if the relative compaction (R.C.) is required to be 95% of the modified Proctor Ya.max?
The modified Proctor test (ASTM D 698, method C) was performed for a soil with G, = 2.70, and the results are as follows: Moist Weight in Mold, gf Water Content, % 6.5 3250 9.3 3826 12.6 4293 14.9 4362 17.2 4035 18.6 3685 (a) Plot the Ya versus w relation. (b) Determine Ya.max and wopt• (c) Calculate S and e at the maximum dry unit weight point. (d) What is Y at w. (e) What is the range of water content if the relative compaction (R.C.) is required to be 95% of the modified Proctor Ya.max? pt? opr?
A 627-g sample of sand was found to have the following amounts of material retained on each sieve/pan: 3/8 in. = 22 g, No. 4 = 45 g, No. 8 = 96 g, No. 16 = 122 g, No. 30 = 163 g. No. 50 86 g, No. 100 = 51 g, No. 200 = 30 g, pan = 11 g a. Calculate the fineness modulus of the sand. b. Is this sieve analysis valid for acceptance purposes? Explain why. c. Does the sand meet the particle size criteria of ASTM C 33. Fully justify your answer (list and check all relevant criteria from ASTM C33)