3. Consider the shown configuration where water Pump from a large, open reservoir flows through the pipe Water and discharges to atmosphere. When the pump is not running, it does not prevent water from flowing Pipe Spr through the pipe. At this state, the force that develops in the spring is 1000 N. However, when the pump is running, the force in the spring becomes 3000 N. The diameter of the pipe is 0.1 m. Neglecting all frictional effects, determine the power delivered by the pump to the fluid. Pwater 1000 kg/m³.

3. Consider the shown configuration where water Pump from a large, open reservoir flows through the pipe Water and discharges to atmosphere. When the pump is not running, it does not prevent water from flowing Pipe Spr through the pipe. At this state, the force that develops in the spring is 1000 N. However, when the pump is running, the force in the spring becomes 3000 N. The diameter of the pipe is 0.1 m. Neglecting all frictional effects, determine the power delivered by the pump to the fluid. Pwater 1000 kg/m³.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1. The figure shows a type of flushometer in which the flat vane rotates on a pivot as it deflects the fluid stream. The fluid force is balanced by means of a spring. Determine the spring force required to hold the paddle in a vertical position when water is flowing at 100 gal/min. The diameter of the pipe is 1"
A hemispherical tank of radius R is initially filled with water. At the bottom ofthe tank, there is a hole of radius r through which the water drains under the influence of gravity. Find the depth ofthe water in the tank at any time t, and determine how long it will take the tank to drain completely.f, instead of draining through an orifice of constant area, the tank drains through an orifice whose area is controlled by a float valve in such a way that it is proportional to the instantaneous depth of the water in the tank. 2 2 6:44 äles
A high-pressure washing system's pump supplies 1 gallon of water persecond at 100 psi pressure. The nozzle should be designed so that the static pressureof the water as it exits the nozzle is the same as the atmospheric pressure. If theinside diameter of the hose leading from the pump to the nozzle is 2 in., whatshould the diameter of the nozzle exit be? What will be the velocity of the waterat the exit of the nozzle?
To what height will the jet of fluid rise for the conditions shown in the figure?
Water with a density of 1.94 slug/ft³ is in a cart. Water is ejected from the cart with a velocity of 45 ft/s and a flow rate of 200 gal/min. It leaves at an angle of 60°. Assume the water inside the cart is motionless. a. Sketch the control volume b. Find the force F required to keep the cart in place 45 ft/s 60°
Q3. V2 = 5 m/s Az = 0.9 m² 30 Water A = 0.3 m2 V = 15 m/s A water jet enters horizontal section of the piping system and exists from the system from the as shown in the figure. Determine the anchoring force needed to hold the system in place. Density of the water is 1000 *º
3-56. A 2-in. Younded orifice exists in the horizontal bottom of a large tank. The water in the tank is 12 ft deep. Find the discharge through the orifice and the velocity in the jet 6 ft below the orifice. Cc = 1.0
A brand of toothpaste is made using a mixture of white and red paste. During the manufacturing process, both pastes are pumped through a pipe, with the red paste lying in the centre of the pipe, as shown in Figure Q2. The pipe has an internal radius, R₂, and the segment of red paste has a radius R₁. The flow is found to follow the Poiseuille equation, i.e. u(r) = 1 dp - (R² - r²) dp Where u is the viscosity of the paste and μ is the pressure gradient. The total flow of toothpaste through the pipe is Qtot, and the flowrate of the red paste is Qred. dx 4μ dx The toothpaste has a density of p = 1200 kg/m³, and a viscosity of 0.03 Pa.s. The pipe has a radius R₂ = 5 cm and a length L = 2 m. R₁ a) Find an expression for the flowrate of the red toothpaste. You answer should be in terms of µ, R₁, R₂, P) b) The flow in the pipe becomes turbulent when the Reynolds number reaches 2000 (where Re is calculated using the mean velocity across the pipe). What is the maximum pressure drop along the…
If the static pressure of that fluid in the pipeline is 4.3 ´ 104 Pa while its total pressure is 4.7 ´ 104 Pa, determine the kinetic energy per unit volume of the fluid. Assume that the fluid is incompressible and non-viscous. Consequently, calculate the volume flow rate in the pipeline. Take density of the fluid to be 103 kgm-3and the cross-sectional area of the pipeline as 20 cm2.
A brand of toothpaste is made using a mixture of white and red paste. During the manufacturing process, both pastes are pumped through a pipe, with the red paste lying in the center of the pipe, as shown in Figure Q2. The pipe has an internal radius, R2, and the segment of red paste has a radius R1. The flow is found to follow the Poiseuille equation, i.e. 1 dp u(r) = -- 4µdx (R²2-²) Where u is the viscosity of the paste and dp dx is the pressure gradient. The total flow of toothpaste through the pipe is Qtot, and the flowrate of the red paste is Qred. The toothpaste has a density of p = 1200 kg/m3, and a viscosity of 0.03 Pa.s. The pipe has a radius R2 = 5 cm and a length L = 2 m. a) Find an expression for the flowrate of the red toothpaste. You answer should be in terms of µ, R1, R2, dp dx) b) The flow in the pipe becomes turbulent when the Reynolds number reaches 2000 (where Re is calculated using the mean velocity across the pipe). What is the maximum pressure drop along the pipe…
Situation 7: A schematic of a garden fountain is given in the figure. A pump located beneath a water reservoir discharges a single jet vertically upward to a height of 6 ft above the reservoir surface. Under ideal conditions, the volume flow of liquid is 250 gpm. (1 ft3 = 7.48 gal) Determine the power deliverd added by the pumpin order to raise the water to 6 feet. Neglect friction. 6 ft Assuming that the jet remains circular at the rate of water flowing given, What is the diameter of the jet at one-third the height of the fountain? 2 ft Compute the pressure in the 6" diameter suction pipe 18 in. Ref. Datum Pump
From point A to point B of the system in the figure flows oil with specific weight 55 lb/ft3 at a rate of 26.2 gallons / minute. Determine the height h.