1.) What are at least the 2 goals or concern of an electrical engineer in the transmission (or distribution lines)? 2.) Based from what we have discussed, referring to the voltage levels, MV level is up to what KV? 3) Electric power lines suspended on a structure or pylon is called as 4.) The initial word ACAR in conductors means 5.) What are the 3 other common types of aluminum conductors used in transmission lines, write the initials only. 6.) The type of tower that holds the conductor along 0-5 degrees line 7.) The part of the tower where the cross-arms are attached. 8.) Another part of the tower where the neutral wire is fixed 9.) The material usually called composite insulator used as insulator is called 10.) Porcelain insulator is made from what material?

1.) What are at least the 2 goals or concern of an electrical engineer in the transmission (or distribution lines)? 2.) Based from what we have discussed, referring to the voltage levels, MV level is up to what KV? 3) Electric power lines suspended on a structure or pylon is called as 4.) The initial word ACAR in conductors means 5.) What are the 3 other common types of aluminum conductors used in transmission lines, write the initials only. 6.) The type of tower that holds the conductor along 0-5 degrees line 7.) The part of the tower where the cross-arms are attached. 8.) Another part of the tower where the neutral wire is fixed 9.) The material usually called composite insulator used as insulator is called 10.) Porcelain insulator is made from what material?

EBK ELECTRICAL WIRING RESIDENTIAL

19th Edition

ISBN:9781337516549

Author:Simmons

Publisher:Simmons

Chapter4: Conductor Sizes And Types, Wiring Methods, Wire Connections, Voltage Drop, And Neutral Conductor Sizing For Services

Section: Chapter Questions

Problem 10R: What are the colors of the conductors in nonmetallic-sheathed cable for a. 2-wire cable?...

See similar textbooks

Similar questions

Alumoweld is an aluminum-clad steel conductor. True False
What are the colors of the conductors in nonmetallic-sheathed cable for a. 2-wire cable? _______________, _______________ b. 3-wire cable? _______________, _______________, _______________
Alumoweld is an aluminum-clad steel conductor. a. True b. False
INSULATORS A string of suspension consists of four (4) units. The Voltage between each pin and earth is 0.14 of the Self-Capacitance of the unit. The Voltage between the Line Conductor and earth is 135 KV. Find the Voltage distribution across each unit. Draw the diagram.
The three bus-bar conductors in an outdoor sub-station are supplied by units of post insulators. Each unit consists of a stack of 3-pin insulators fixed one on the top of the other. The voltage across the lowest insulator is 8-45 kV and that across the next is 7-25 kV. Find the bus-bar voltage of the station.
Single core cable design for 25 kV. The radius of conductor is 0.5 cm. The insulation material consists of two layers. The thickness of each layer is 2 cm. The voltage of first and second layers are 20 kV, 5 kV respectively. The maximum Electric stress of the cable is
b) Why Generation Voltage Levels are low in the range of 11 kV/ 33 kV etc? c) Why ACSR Conductors are preferred over Copper Conductors?
In an outdoor substation the three bus-bar conductors are supported by units of post type insulators. Each unit consists of a stack of 3 pin type insulators fixed one on the top of the other. The voltage across the lowest insulator is 13kV and that across the next unit is 12KV. Estimate: 17. i. ratio of mutual to self-capacitance ii. the bus-bar voltage of the substation. iii. Efficiency across the string of insulators
12. For a small line voltage drop, the resistance of line conductors should be a. a small percentage of the total circuit resistance. b. a large percentage of the total circuit resistance. c. equal to the load resistance. d. equal to the combination of load resistance and source resistance. e. equal to the source resistance. 13. When a permitted percentage of line voltage drop is specified in a problem, the value is calculated directly from the a. load voltage. b. source voltage. c. voltage across control components. d. voltage across components that make up the load resistance. e. wire tables.
With respect to conductor insulation, describe the following location ratings: a. Dry b. Damp c. Wet
A string of suspension consists of four (4) units. The Voltage between each pin and earth is 0.05 of the Self-Capacitance of the unit. The Voltage between the Line Conductor and earth is 90 KV. Find the Voltage distribution across each unit. Draw the diagram.
2. What's the primary instrument for locating a break in a cable during emergency maintenance?A. OSAB. OTDRC. MultimeterD. Power meter