The figure below shows five resistors and two batteries connected in a circuit. What are the currents 11, 12, and 13? (Consider the following values: R₁ = 1.18 Q, R₂ = 2.20 Q, R3 = 3.17 Q, R4 = 4.04 Q, R5 = 6.14 Q. Due to the nature of this problem, do not use rounded intermediate values in your calculations-including answers submitted in WebAssign. Indicate the direction with the sign of your answer.) 3.11 Your response differs from the correct answer by more than 100%. A × Your response differs from the correct answer by more than 10%. Double check your calculations. A 2.76 12 2.58 13 x The response you submitted has the wrong sign. A R$ www R₁ 12.0 V R₂ 9.00 V Ra www R₁

The figure below shows five resistors and two batteries connected in a circuit. What are the currents 11, 12, and 13? (Consider the following values: R₁ = 1.18 Q, R₂ = 2.20 Q, R3 = 3.17 Q, R4 = 4.04 Q, R5 = 6.14 Q. Due to the nature of this problem, do not use rounded intermediate values in your calculations-including answers submitted in WebAssign. Indicate the direction with the sign of your answer.) 3.11 Your response differs from the correct answer by more than 100%. A × Your response differs from the correct answer by more than 10%. Double check your calculations. A 2.76 12 2.58 13 x The response you submitted has the wrong sign. A R$ www R₁ 12.0 V R₂ 9.00 V Ra www R₁

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter7: Parallel Circuits

Section: Chapter Questions

Problem 3PP: Using the rules for parallel circuits and Ohmslaw, solve for the missing values....

See similar textbooks

Similar questions

Since R1=3198.15ohm, R2=9694.26ohm and Ri=Infinite in the circuit given in the figure, write the equivalent resistance in Ohms between the terminals A-B. When making your transactions, 2 digits will be taken after the dot. Write the result you found according to the margin of error of ± 10% (plus/minus ten percent). While writing the answer, a space is written in front of the value (kOhm, ohm, V, A) etc. values should not be written. Only numeric values should be entered. A period (.) must be used as a decimal separator. Do not use thousands separators (do not use signs such as semicolons). An example notation is given below. Let the value you find be 1.15Kohm. You should write 1150.00 in the box. Let the value you find be 432.63 ohms. You should write 432.63 in the box. If the correct answer is X, values entered in the range of X ± (X*10/100) (including limits) will be accepted. If x=50, it will be accepted as between [45,55].
Determine the nodes/junctions, Current (I), Loops, Voltage drop on each Resistor (R), and Power (P) on each Resistor (R) with the following given and illustration: Use the following given for batteries and resistors (color bands for your value of resistors, use the lower limit). R1 = red red black goldR2 = orange green black silverR3 = white orange black goldR4 = green violet brown goldR5 = violet red black silverR6 = yellow green black silverR7 = brown black black gold V1 (lower left) = 100VV2 (top center) = 150VV3 (lower right) = 200V
How can I get the solution and answers for this problem for parts (d, e, f and g)? (Answers should be in 4 decimal places)
multirange ammeter was designed using direct method to give three scales with Rsh1= 0.001285989 0, Rsh2=0.000562552 0, and Rsh3=0.000100001 Q. The d'Arsonval meter has Rm=6 Q and full scale current of 1.5 mA. Find the ranges.? 8 (Ctrl) -
201503131 3. Two batteries with E, = 3V and E₂ = 5 V are connected with three resisters R₁ = 10 ohms, R₂ = 20 ohms and R3 = 30 ohms as shown in the Figure. (8-points) a) Find the currents I₁, I2 and 13 passing through the resistors R₁, R₂ and R3 consecutively and indicate their directions in the figure. (4-points) I Iz V.P 23 13 = I₁+I₂ R₂ 10 3 & 3-101₁-3013 =0 5-20 I 2-10 I₁ = 0 I R₁ ww R3 30 20 25
Linear Resistor data Lightbulb data i(mA) v(V) i(mA) v(V) 0.0 0.00 0.0 0.000 19.0 0.50 11.7 0.588 25.4 1.00 19.9 0.998 31.2 1.50 29.8 1.495 36.3 2.00 39.8 1.997 41.0 2.50 49.7 2.490 45.5 3.00 59.8 3.000 49.6 3.50 69.7 3.500 53.5 4.00 79.7 4.000 57.1 4.50 89.8 4.500 60.8 5.00 99.7 5.000 64.2 5.50 109.6 5.500 67.4 6.00 119.5 6.000 70.6 6.50 129.6 6.500 73.7 7.00 139.5 7.000 76.6 7.50 149.5 7.500 79.5 8.00 159.5 8.000 82.3 8.50 169.6 8.500 85.1 9.00 179.5 9.000 87.8 9.50 189.4 9.500 90.4 10.00 199.4 10.000
Pls help me answer number 1(continuation of letter e,f and g.) The other image is the solving of a,b,c and d. Just follow it. Note : pls always use 3 decimal places throughout the process. Thank you
Consider a PV Module with 24 solar PV cells with the Size of each 15cm x 10cm are connected in series. Choose the correct statement for the above. (Assume necessary data) a. The output voltage is 12 V, the output power is 540W b. The output voltage is 12 V, the output power is 54W c. The output voltage is 12 V, the output power is 5.4W d. The output voltage is 24 V, the output power is 2.25W
1.) From the circuit, what are the theoretical voltages across the powersupply, R1, and R2? (kindly include the formula and kindly explain what a theoretical voltage is.)
Answer the follwing. Modified true or false. Write True if the statement is true. If not, write false and change the underlined word/s to make the statement true. If you multiply current and voltage, the answer will be in units of resistance. Superconductors completely lose their electrical resistance at low finite temperatures. A fuse or a circuit breaker is always connected in series with the device the it protects. When two cells are connected in a series, the positive terminal of a cell is connected to the negative terminal of the other cell.
How to solve this example
Question 3: A very simple model for the distribution of clectricity to a typical home is shown in the figure below. Some of components labeled a, b, c, d, c, f, g and h represent the electrical source to the home, some represent the wires that carry the electrical current from the source to the devices in the home requiring electrical power, some represent lamps, televisions, hair dryers and other devices that require power. Assume you are an engineer in charge of a project and one of your subordinate engineers reports that the interconnection in the figure does not pass the power check. The data for the interconnection are given in the table below. Is the subordinate correer? Explain your answer. If the subordinate is correct, find the error in the data. Explain your answer clearly. Based on your answer identify that which label(s) used for the electrical source, wires or other devices. a e h