Wireless Power Transmission
Your laptop has wireless communications connectivity, and you might even have a wireless keyboard or mouse. But there’s one wire you haven’t been able to get rid of yet—the power cord.
Researchers are working on ways to circumvent the need for a direct electrical connection for power, and they are experiencing some success. Recently, investigators were able to use current lowing through a primary coil to power a 60 W lightbulb connected to a secondary coil 2.0 m away, with approximately 15% efficiency. The coils were large and the efficiency low, but it's a start.
Figure VI.2
The wireless power transfer system is outlined in Figure VI.2. An AC supply generates a current through the primary coil, creating a varying magnetic Held. This field induces a current in the secondary coil, which is connected to a resistance (the lightbulb) and a capacitor that sets the resonance frequency of the secondary circuit to match the frequency of the primary circuit.
At a particular moment, the current in the primary coil is clockwise, as viewed from the secondary coil. At the center of the secondary coil, the field from the primary coil is
- A. To the right.
- B. To the left.
- C. Zero.
Want to see the full answer?
Check out a sample textbook solutionChapter P Solutions
College Physics: A Strategic Approach (4th Edition)
Additional Science Textbook Solutions
College Physics (10th Edition)
Conceptual Integrated Science
Physics (5th Edition)
Cosmic Perspective Fundamentals
Physics: Principles with Applications
The Cosmic Perspective Fundamentals (2nd Edition)
- Integrated Concepts (a) What is the average power output of a heart defibrillator that dissipates 400 J of energy in 10.0 ms? (b) Considering the high-power output, why doesn’t the defibrillator produce serious burns?arrow_forwardIntegrated Concepts (a) An aluminum power transmission line has a resistance of 0.0580/km. What is its mass per kilometer? (b) What is the mass per kilometer of a copper line having the same resistance? A lower resistance would shorten the heating time. Discuss the practical limits to speeding the heating by lowering the resistance.arrow_forwardB3arrow_forward
- Validity of Ampere's Law. In which of the following systems does Ampere's law apply? Consider that a constant total current / flows through each wire. The Amperian loops are colored red. + I. II. III. IV. A. Only I. B. Only I. and II. C. Ampere's law applies to all systems.arrow_forward1. What equation do you get when you apply the loop rule to the loop abcdefgha, in terms of the variables in the figure? 2. If the current through the top branch is I2 = 0.41 A, what is the current through the bottom, I3, in amps?arrow_forwardSolve Problemarrow_forward
- 5. In the Ohm's Law experiment, you got the following graph for the currents versus potential difference for the following cases Slope = 20 a) Using just one resistor (R1) in the circuit. b) Using just one resistor (R2) in the circuit. c) Using two resistors (R₁ and R₂) in parallel connection. d) Using two resistors (R₁ and R2) in series connection. Find the values of R1 and R2 V (volts) Slope = 6.66 I (A)arrow_forwardPhysicsarrow_forwardWhat will happen if a current directed upward is introduced into the wire in the figure below. x x xx xx x x xx x x xx x x xx x x A. nothing happens B. the wire will deflect to the right C. the wire will deflect to the left OD. the wire will move uparrow_forward
- 1. Explain how AC and DC current are different in your own words. Give an example of when you might encounter each type of current. 2. You find that there is too much resistance in a circuit to light up your LED's when you put them in a row, so you decide to hook them up in parallel. Why do they now light up and what possible danger is there now?arrow_forward云 ME History Bookmarks Develop Window Help A openvellum.ecollege.com slie -.. MyLab and Mastering E Assignments P Problems: Current and Resi... M MasteringPhysics Constants ***arrow_forwardHow would the value of each of the four following physical quantities change over time after the switch is closed? Explain why for each case in 1 or 2 sentences. (You may assume that the resistance of the batteries, the wires, and the switch are negligibly small for this question). a. The voltage across the capacitor, VCAP b. The voltage across the light bulb, VBULB c. The current through light bulb, IBULB d. VBULB + VCAParrow_forwardarrow_back_iosSEE MORE QUESTIONSarrow_forward_ios
- Physics for Scientists and EngineersPhysicsISBN:9781337553278Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPhysics for Scientists and Engineers with Modern ...PhysicsISBN:9781337553292Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPhysics for Scientists and Engineers, Technology ...PhysicsISBN:9781305116399Author:Raymond A. Serway, John W. JewettPublisher:Cengage Learning
- College PhysicsPhysicsISBN:9781938168000Author:Paul Peter Urone, Roger HinrichsPublisher:OpenStax CollegePhysics for Scientists and Engineers: Foundations...PhysicsISBN:9781133939146Author:Katz, Debora M.Publisher:Cengage Learning