Two metal bars are fastened together at the bolted flange connection shown. There are 2 total bolts connecting the two metal bars together and each bolt has diameter dbolt = 19.1 mm. The flange is oriented at angle 0 = 55° with respect to longitudinal axis of the metal bars. If an axial force F = 40 kN is applied as shown, determine the overall safety factor of the bolted connection with respect to yielding. You may assume the bolts are made out of 4340HR steel and the strength of the bolt in shear is 50% of the tensile strength of the bolt material.

Two metal bars are fastened together at the bolted flange connection shown. There are 2 total bolts connecting the two metal bars together and each bolt has diameter dbolt = 19.1 mm. The flange is oriented at angle 0 = 55° with respect to longitudinal axis of the metal bars. If an axial force F = 40 kN is applied as shown, determine the overall safety factor of the bolted connection with respect to yielding. You may assume the bolts are made out of 4340HR steel and the strength of the bolt in shear is 50% of the tensile strength of the bolt material.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.8.3P

See similar textbooks

Similar questions

Two metal bars are fastened together at the bolted flange connection shown. There are 2 total bolts 12.7 mm. The flange is - connecting the two metal bars together and each bolt has diameter dbolt oriented at angle 55° with respect to longitudinal axis of the metal bars. If an axial force F = 40 kN is applied as shown, determine the overall safety factor of the bolted connection. You may assume the bolts are made out of 1020HR steel and the strength of the bolt in shear is 50% of the tensile strength of the bolt material. SF overall F = = 2.576 Ꮎ ? X 0% = F
Two metal bars are fastened together at the bolted flange connection shown. There are 4 total bolts connecting the two metal bars together and each bolt has diameter = 50° with dbolt 12.7 mm. The flange is oriented at angle respect to longitudinal axis of the metal bars. If an axial force F = 40 kN is applied as shown, determine the overall safety factor of the bolted connection. You may assume the bolts are made out of 1020HR steel and the strength of the bolt in shear is 50% of the tensile strength of the bolt material. = F SFO overall = Ө number (rtol=0.01, atol=1e-05) F ?
Two metal bars are fastened together at the bolted flange connection shown. There are 2 total bolts connecting the two metal bars together and each bolt has diameter dbolt 12.7 mm. The flange is oriented at angle = 50° with respect to longitudinal axis of the metal bars. If an axial force F = 30 kN is applied as shown, determine the overall safety factor of the bolted connection. You may assume the bolts are made out of 1020HR steel and the strength of the bolt in shear is 50% of the tensile strength of the bolt material. F - SF overall = 0 number (rtol=0.01, at F ?
For the connection shown, determine the average shear stress in the 0.75-in.-diameter bolts if the load is P = 54 kips. P O 17.8 ksi O 14.8 ksi O 20.1 ksi O 24.4 ksi O 22.9 ksi
Downvote for incorrect answer The connection is made using a bolt and nut and two washers. If the allowable bearing stress of the washers on the boards is (b)allow 2 ksi, and the allowable tensile stress within the bolt shank S is (allow 18 ksi, determine the maximum = allowable tension in the bolt shank. The bolt shank has a diameter of 0.31 in., and the washers have an outer diameter of 0.75 in. and inner diameter (hole) of 0.50 in.
15 M18 X4 Bolts F= 20 kN 60 D 60 |-75---75--| 50 250 A rectangular steelbar with 15 mm thickness attached to a 300 mm steel channelusing four tightly fitted bolts located at A, B, C, and D. For a F = 20 kN load find: (a) The resultant load on each bolt (FA, Fs, Fo, Fo=?) (b) The maximum shear stress in each bolt (T=?) (c) The maximum bearing stress occurred on the construction (OMAX=?) Note:All dimensions are given in mm unit.
For a lap joint, determine the maximum safe load P which may be applied if the shearing stress in the rivets is limited to 60 MPa, the bearing stress in the plates to 110 MPa, and the average tensile stress in the plate to 140 MPa
The lap joint is fastened with four 3/5 in-diameter rivets. The allowable normal stress in the plates is 30 ksi, allowable shearing stress is 24 ksi for the rivets and 28 ksi for the plates in bearing. Find the maximum safe axial load P that can be applied to the joint. Assume that the load is equally distributed among the rivets. Include the necessary FBDs showing the involved internal forces in the exploratory sections. Your solutions are invalidated without the required FBDs.
25 kN 25 KN 12 mm 18 mm 1.55 The lap joint is fastened with four 3/4-in.-diameter rivets. The working stresses are 14 ksi for the rivets in shear and 18 ksi for the plates in bearing. Find the maximum safe axial load P that can be applied to the joint. Assume that the load is equally distributed among the rivets. 7.5 mm 25 KN 7.5 mm 4 in. in. 25 KN 12 mm 12.5 mm FIG. P1.54 18 mm 78 in. FIG. P1.55 78
SOLVE COMPLETELY THE FOLLOWING PROBLEMS. -01 For the assembly nhovn the a1lovable atress in the 75-mm diameter rod BC is 80 MPa, and 50 MPa in the 100-mm rod AB. Neglecting the effect of stress concentration at joint B, determine the largest torque vhich may bě applied at c. a = 100 mm T = 50 MPa d = 75 mm T- 80 MPa Pig. 01
The lap joint shown is fastened by 4 rivets of ¾ in. diameter. Find the maximum load P that can be applied if the working stress are 14000 psi for shear in the rivet and 18000 psi for bearing in the plate. Assume that the applied load is distributed evenly in the 4 rivets. The plate is 7/8 in. thick and 4 in wide.
The bolt AB in (Figure 1) has a diameter of 18 mm and passes through a sleeve that has an inner diameter of 42 mm and an outer diameter of 52 mm. The bolt and sleeve are made of A-36 steel and are secured to the rigid brackets as shown. If the bolt length is 220 mm and the sleeve length is 200 mm, determine the tension in the bolt when a force of 50 kN is applied to the brackets.