Two balanced three phase loads are connected in parallel, the loads are L=40 kW at 0.84 pf lag, and L2- 40 kVA at 0.9 pf lead. The loads are fed from a distribution line with an impedance of 0.15+j0.3 Q/0. The line to neutral voltage at the load end is 237 V and zero phase shift, the impedance of first load in Q (if it is Y-connected) is; O A. 0.99+j0.64 O B. None O C.2.97-j1.92 O D. 0.99-j0.64 Q E. 2.97+j1.92

Two balanced three phase loads are connected in parallel, the loads are L=40 kW at 0.84 pf lag, and L2- 40 kVA at 0.9 pf lead. The loads are fed from a distribution line with an impedance of 0.15+j0.3 Q/0. The line to neutral voltage at the load end is 237 V and zero phase shift, the impedance of first load in Q (if it is Y-connected) is; O A. 0.99+j0.64 O B. None O C.2.97-j1.92 O D. 0.99-j0.64 Q E. 2.97+j1.92

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.23MCQ: In a balanced system, the phasor sum of the line-to-line voltages and the phasor sum of the...

See similar textbooks

Similar questions

In a balanced system, the phasor sum of the line-to-line voltages and the phasor sum of the line-to-neutral voltages are always equal to zero. (a) False (b) True
In the circuit in the figure; L1 load draws 15 kVA with lagging power factor 0.6. The L2 load draws 6 kVA with a leading power factor of 0.8. According to this; What is the value of the complex power for the L2 load?
The circuit shows an unbalanced electrical installation powered by a positive sequence symmetrical three-phase network of 380 V compound voltage. The loads are single phase. Load 1 absorbs an active power of 950 W with f.d.p. 0.5 inductive. Load 2 absorbs an active power of 1,140 W with f.d.p. Unit. Load 3 absorbs from the network an active power of 760 W with f.d.p. 0.5 capacitive. Taking the network voltage URN as the phase reference, calculate: a) complex expressions of the line currents IR. Is. and IT
The circuit shows an unbalanced electrical installation powered by a positive sequence symmetrical three- phase network of 380 V compound voltage. The loads are single phase. Load 1 absorbs an active power of 950 W with f.d.p. 0.5 inductive. Load 2 absorbs an active power of 1,140 W with f.d.p. Unit. Load 3 absorbs from the network an active power of 760 W with f.d.p. 0.5 capacitive. Taking the network voltage URN as the phase reference, calculate: a) complex expressions of the line currents IR. Is. and IT RO- SO TO IR Is IT U₁-380 V CARGA 1 P₁ =950 W cos p1=0,5 ind. CARGA 2 P₂=1.140 W cos p₂=1 CARGA 3 P3=760 W cos p3=0,5 cap.
A balanced load is connected in star across a 3 phasec415V 50Hz supply. The load consists of a coil of resistance 25 ohms and inducrance 0.5 henry in paeallel with a purw resistance of 28 ohms and a pure capaciror of 60microfarads capacitance ,in each branch. Calculate a. The line currents? Need full working and answer has to be 9.3A Formola for inductance XL= 2×3.142FL FORMOLA FOR CAPACITOR XC= 1/2×3.142×FC
An 11 kV generating station has four identical 3-phase alternatorsGl, G2, G3 and G4 each of L0 MVA capacity and l2%o reaclarce.There are two section of bus-bar P and Q, linked by a reactor X ratedat 10 MVA with 24o/oreactance. From section Q load is taken througha 6 MVA, i 1kV/66kV step-up transformer (T1) having a reactance of37o. Determine the fault current if a three-phase short-circuit occursnear the high voltage terminal of the transformer (F) as shown inFigure.Assume prefault voltages to be 1 pu and prefault currents to be zero
If a Load absorbs 10 kVA at a leading power factor of 0.6. Then the complex power is: Select one: a. -6000 - j8000 VA b. 6000 + j8000 VÀ c. 6000 - j8000 VÀ d. None of these
Three single phase loads are connected to the 400 V, three phase lines, 60 Hz. Load 1 operating at 3 kVA, 0.8 power factor lagging and is connected at line "a" and "b", Load 2 is a 5 kW heater and is connected at line "b" and "c", Load 3 is 4.5 kW machine that operates at a power factor of 0.6 lagging and is connected at lines "c" and "a". a. What are the line currents Ia, Ib, and Ic in Amperes (in Polar form) b. What is the total real power in W. c. Total Reactive Power. d. Total Apparent Power. e. What is the total power factor.
Three single phase loads are connected to the 400 V, three phase lines, 60 Hz. Load 1 operating at 3 kVA, 0.8 power factor lagging and is connected at line "a" and "b", Load 2 is a 5 kW heater and is connected at line "b" and "c", Load 3 is 4.5 kW machine that operates at a power factor of 0.6 lagging and is connected at lines "c" and "a". a. What are the line currents Ia, Ib, and Ic in Amperes (in Polar form) b. What is the total power factor.
)Two complex loads Z1 and Z2 are connected in parallel and powered by a value voltage effective 7.2 kV and frequency 60 Hz. The first load has a power of 50 kVA and a factor of rear power of 0.9. The second charge has a power of 45 kW and a rear power factorof 0.91. Determine in steady state the kVAR power and the capacity required to correct the Total power factor to a value of 0.97 rear.
A balanced load is connected in star across a 3 phasec415V 50Hz supply. The load consists of a coil of resistance 25 ohms and inducrance 0.5 henry in paeallel with a purw resistance of 28 ohms and a pure capaciror of 60microfarads capacitance ,in each branch. Calculate a. The line currents The answer has to be 9.3A
1- Your example deduced the total strength of the following three loads: the first load 1200VA at a power factor of 0.7 late, the second load 350VA at a power factor of 0.5 was late, and the third load 3275VA at a power factor of 1.0.