a11¹0+Ts/1ipX_xRlwUUPZvncHq13mHcMJkmGPPvb_Tutorial 7(41 X 64GTransformers1Question 1A 600 kVA single-phase transformer with a turns ratio of 3300:380 and a rated primaryvoltage of 3300 V has a total series equivalent impedance referred to the primary (HV)winding of 1,07477.53° 2. If the transformer is to deliver its rated kVA to a load connectedto its secondary winding with a secondary voltage equal to 380 V and with the load powerfactor equal to 0,7 lagging, calculate the voltage that must be applied to the primary winding.C

Tutorial 7 Question 1 Transformers A 600 kVA single-phase transformer with a turns ratio of 3300:380 and a rated primary voltage of 3300 V has a total series equivalent impedance referred to the primary (HV) winding of 1,07277,53° 2. If the transformer is to deliver its rated kVA to a load connected to its secondary winding with a secondary voltage equal to 380 V and with the load power factor equal to 0,7 lagging, calculate the voltage that must be applied to the primary winding.

Tutorial 7 Question 1 Transformers A 600 kVA single-phase transformer with a turns ratio of 3300:380 and a rated primary voltage of 3300 V has a total series equivalent impedance referred to the primary (HV) winding of 1,07277,53° 2. If the transformer is to deliver its rated kVA to a load connected to its secondary winding with a secondary voltage equal to 380 V and with the load power factor equal to 0,7 lagging, calculate the voltage that must be applied to the primary winding.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter3: Power Transformers

Section: Chapter Questions

Problem 3.6P

See similar textbooks

Similar questions

A single-phase step-down transformer is rated 13MVA,66kV/11.5kV. With the 11.5 kV winding short-circuited, rated current flows when the voltage applied to the primary is 5.5 kV. The power input is read as 100 kW. Determine Req1andXeq1 in ohms referred to the high-voltage winding.
A single-phase, 50-kVA,2400/240-V,60-Hz distribution transformer has the following parameters: Resistance of the 2400-V winding: R1=0.75 Resistance of the 240-V winding: R2=0.0075 Leakage reactance of the 2400-V winding: X1=1.0 Leakage reactance of the 240-V winding: X2=0.01 Exciting admittance on the 240-V side =0.003j0.02S (a) Draw the equivalent circuit referred to the high-voltage side of the transformer. (b) Draw the equivalent circuit referred to the low-voltage side of the transformer. Show the numerical values of impedances on the equivalent circuits.
The direct electrical connection of the windings allows transient over voltages to pass through the auto transfonner more easily, and that is an important disadvantage of the autotransformer. (a) True (b) False
For a short-circuit test on a 2-winding transformer, with one winding shorted, can you apply the rated voltage on the other winding? (a) Yes (b) No
With the American Standard notation, in either a Y-or-Y transformer, positive- sequen quantities on the high-voltage side shall lead their corresponding quantities on the low-voltage side by 30. (a) True (b) False
In per-unit equivalent circuits of practical three-phase transformers, under balanced thr-phase operation, in which of the following connect ions would a phase-shifting transformer come up? (a) Y-Y (b) Y- (c) -
An ideal transformer has no real or reactive power loss. (a) True (b) False
The symbol shown is a(n) a. iron core transformer. b. auto transformer. c. current transformer. d. air core transformer.
The ideal transformer windings are eliminated from the per-unit equivalent circuit of a transformer. (a) True (b) False
Three single-phase, two-winding transformers, each rated 450MVA,20kV/288.7kV, with leakage reactance Xeq=0.10perunit, are connected to form a three-phase bank. The high-voltage windings are connected in Y with a solidly grounded neutral. Draw the per-unit equivalent circuit if the low-voltage windings are connected (a) in with American standard phase shift or (b) in Y with an open neutral. Use the transformer ratings as base quantities. Winding resistances and exciting current are neglected.
Rework Problem 3.14 if the transformer is delivering rated load at rated secondary voltage and at (a) unity power factor, (b) 0.8 power factor leading. Compare the results with those of Problem 3.14. -
The ratings of a three-phase, three-winding transformer are Primary: Y connected, 66kV,15MVA Secondary: Y connected, 13.2kV,10MVA Tertiary: connected, 2.3kV,5MVA Neglecting resistances and exciting current, the leakage reactances are: XPS=0.09 per unit on a 15-MVA,66-kV base XPT=0.08 per unit on a 15-MVA,66-kV base XST=0.05 per unit on a 10-MVA,13.2-kV base Determine the per-unit reactances of the per-phase equivalent circuit using a base of 15 MVA and 66 kV for the primary.