The following results were obtained from a liquidlimit test on a clay using the Casagrande cupdevice. The natural water content of this clay is 38%and the plastic limit is 21%.No. ofblows612202832Water52.547.142.338.637.5content(%)What is the liquid limit of this clay?b. What is the plasticity index of this clay?What is the liquidity index of this clay?

Given data: Natural water content (wn) =38% Plastic limit (wp) =21%

The following results were obtained from a liquid limit test on a clay using the Casagrande cup device. The natural water content of this dlay is 38% and the plastic limit is 21%. No. of 6 12 20 28 32 blows Water content 52.5 47.1 42.3 38.6 37.5 (%) What is the liquid limit of this clay? What is the plasticity index of this clay? c. What is the liquidity index of this clay? a. b.

The following results were obtained from a liquid limit test on a clay using the Casagrande cup device. The natural water content of this dlay is 38% and the plastic limit is 21%. No. of 6 12 20 28 32 blows Water content 52.5 47.1 42.3 38.6 37.5 (%) What is the liquid limit of this clay? What is the plasticity index of this clay? c. What is the liquidity index of this clay? a. b.

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter4: Plasticity And Structure Of Soil

Section: Chapter Questions

Problem 4.8P

See similar textbooks

Similar questions

A liquid limit test on a clay was performed with the following results. The natural water content of the clay is 38% and plastic limit is 21%. Number of Blows 6 12 20 28 32 Water content (%) 52.5 47.1 42.3 38.6 37.5 What is the liquidity index of this clay? (Use Interpolation) Group of answer choices 0.895 0.96 1.08 0.90 Please answer this asap. For upvote. Thanks
The results of a laboratory consolidation test on a clay specimen are the following. Pressure, ir (lb/ft²) 500 1.000 2.000 4.000 8,000 16.000 Total height of specimen at end of consolidation (in.) 0.6947 0.6850 0.6705 0.6520 0.6358 0.6252 Given the initial height of specimen = 0.748 in.. G specimen = 95.2 g. and area of specimen = 4.91 in.²: a. Plot the e-log or curve = 2.68. mass of dry b. Determine the preconsolidation pressure c. Calculate the compression index, C.
3- Following are the results of a laboratory consolidation test on a sample of undisturbed clay obtained from the field. Final height of specimen (in) Pressure, o' (lb/ft') 1 0.9917 1,000 2,000 4,000 0.9843 0.956 0.9142 8,000 0.8685 16,000 0.8228 32.000 The height of the specimen at the beginning of the test was 1.0 inch, and the diameter was 2.5 inches. The moist specimen weighed 0.31 lb and the water content was determined to be 19%. Estimate the compression index and the preconsolidation pressure from the e-log o' curve. (Plot in Excel) Given: Gs = 2.7.
A liquid limit test on a clay was performed with the following results. The natural water content of the clay is 38% and plastic limit is 21%. Number of Blows 6 12 20 28 32 Water content (%) 52.5 47.1 42.3 38.6 37.5 What is the plasticity index of this clay? (Use Interpolation) Group of answer choices 15.74% 18.99% 18.85% 17.63% Please answer this asap for upvote. thanks
A liquid limit test on a clay was performed with the following results. The natural water content of the clay is 38% and plastic limit is 21%. Number of Blows 6 12 20 28 32 Water content (%) 52.5 47.1 42.3 38.6 37.5 What is the liquid limit of this clay? (Use Interpolation) Group of answer choices 39.85% 39.99% 36.74% 38.63% Please answer this asap for upvote. Thanks
The total density of sand in an embankment was found to be 1900kg/m^3 and the field water content was 12% . In the laboratory, the density of the solid was found to be 2660 kg.m^3, and the maximum and minimum voids ratio were 0.63 and 0.44, respectively What is the void ratio of the sand? Calculate the relative density of the sand in the field:
Part #2 Effective Stress (kPa) Void Ratio (%) The following are the results of laboratory consolidation test conducted on clayey soil sample. Determine, graphically, the compression and recompression indices, Cc, C, of this soil. Using Casagrande's method, determine graphically the preconsolidation pressure. 0.891 54 0.866 107 0.841 214 0.802 429 0.737 858 0.653 1716 0.560 3432 0.467
A sample of moist sand taken from the field was found to have a moisture content of 14% and a porosity of 38%. In the laboratory test that simulates field conditions, it was found that at its densest state, its void ratio is 85% and at its loosest state its void ratio is 40%. Determine the void ratio. Select one: O a. 0.42 b. 0.61 c. 0.79 d. 0.57 It is the densification of soil by removal of air which require mechanical energy. Select one: a. solidification b. consolidation C. compression d. compaction What particular sand is ideal for field density test using sand cone method? Select one: O a. clean sand b. Ottawa sand c. Owatta sand d. white sand
A hydrometer test was conducted on the material passing sieve No, 200 and the results are listed in the table below, The results of sieve analysis on the soil showed that the percentage passing No. 4 was 90 % and that passing No. 200 was 20 %. Estimate the clay size fraction in the soil. Table : Results of hydrometer test diameter (mm) 0.0700 0.0400 0.0150 0.0020 % finer (combined) 19 finer 95 80 16 65 13 45 0.0010 30 6 Select one:
16. In performing water content determination, the readability of the balance for specimen greater than 200 grams is ... A. 0.01 B. 0.001 C. 0.1 I D. 1 17. Which of the following clay mineral has a range of liquid limit between 55-120%? A. Illite B. Montmorillonite C. Kaolinite 18. True or False. Peat and highly organic soils can have water contents up to about 500%.
OMC-Proctor's Test A sample of dry sand has a volume of 1000 ml in its natural state. Its minimum volume when compacted is 750 ml. When gently poured into a measuring cylinder, its possible maximum volume is 1320 ml. what is the relative density?
A sample of moist sand taken from the field was found to have a moisture content of 14% and a porosity of 38%. In the laboratory test that simulates field conditions, it was found that at its densest state, its void ratio is 85% and at its loosest state its void ratio is 40%. Determine the void ratio. Select one: a. 0.79 b. 0.57 c. 0.61 d. 0.42