The correct specific
Q: In a PWM, given that the duty cycle is 80% what is the voltage output?
A: Pulse width modulation contains a high-frequency switching pulse which it contains High and Low…
Q: Calculate the current drawn by the load and the power factor.
A: For the given 3 phase system we need to find a current and power factor of load
Q: 1.8 A motor drive is supplied from a three-phase power converter has conversion efficiency of 90 %…
A:
Q: Assume that the load is measured twice with a watt-hour meter which has a meter constant of 7.2 and…
A: We have an readings which is measured by a watt-hour meter with, Meter Constant (Kh) = 7.2 We have…
Q: By how much the velocity of wind turbine will be multiplied, if its wind power is tripled?
A:
Q: 40% of the production in a factory is I. Makina, 35% II. Machine and 25% III. Machine It is produced…
A: The question is from the Bayes theorem and as per Bayes theorem if A1 ,A2 ,A3 ......An be a…
Q: A mini-hydroelectric power plant is under a head of 275 feet. The turbine efficiency is 0.85 and the…
A: The power system consists of power generation, transmission, and distribution. The transmission…
Q: Determine the economic dispatch for three generator power system to meet load demand values ( PD =…
A: Here, we have to calculate the economic dispatch for the given problem. We have three generators…
Q: A customer has the following average daily load schedule as follows: 6 AM TO 12 NN= 20KW; 12 NN TO…
A:
Q: Read the question carefully and match the answer with its respective question: It has been predicted…
A: given present load factor = 0.67 present year maximum demand = 6 MW load factor = average…
Q: 3. A power station is to supply four regions of loads whose peak values are 10,000 kW, 5000 kW, 8000…
A: 3. From the question given data is as follows: P1=10000 KWP2=5000 KWP3=8000 KWP4=7000 KWDiversity…
Q: ist out all the major components in a thermal power plant
A: Answer: All major components in a thermal power plant.
Q: 4. On the basis of annual operation, the use factor and capacity factor of a central plant are 0.7…
A: Given:-Use Factor=0.7Capacity factor=0.3
Q: A certain power station has the following daily load cycle:- Time (6-8)am (8-12)am (12-16)pm…
A:
Q: if the wind turbine power = 9.9 watt and the speed of turbine = 184.052 rpm swap area = 0.6m what…
A: Wind turbine:- Wind turbine is used to convert wind energy into electricity. Vertical axis wind…
Q: In a typical power system in Oman, Power stations has . . Which converts to and the generated…
A: In a typical power system in Oman , power stations has alternators which converts mechanical energy…
Q: In electric power systems, all the following parameters will be reduced after improvement of power…
A: To choose the correct answer
Q: Find the capacity of the generator.
A:
Q: Q-1: In a 33 kV overhead line, there are three units in the string of insuiators. If the capacitance…
A:
Q: Q1. A certain power station has the following daily load cycle:- Time In hours Load in MW (6-8)am…
A: load duration curve:- it indicates the variation of the load versus time when the load is arranged…
Q: Explain 6 methods of improving power factor in electrical system
A: There are mainly 6 methods for improving power factor in electrical system which are as below,…
Q: A.C. to transmit the same power and for the same loss and the same lamp voltage. Compare the copper…
A: Assuming that the power delivered in the two-wire DC system is P, the resistance per conductor be R1…
Q: What is the reserve capacity, if the maximum demand of generation of power is 50 MW, the load factor…
A: Given, Maximum demand is 50 MW. load factor is 60%. Plant capacity factor is 50%.
Q: Calculate the availability if a generator unit whose failure rate is given as 0.0011failures per…
A: In this question we need to find a availability of a genrator for the given condition.
Q: The actual impedance of a load is 30 OHM. The per-unit impedance of the load is 0.5 pu when Base…
A:
Q: 10 kW, 230 V, d.c shunt generator is operating at rated condition with 80% efficiency. Input power…
A: In this question, 10 kW, 230 V, d.c shunt generator is operating at rated condition with 80%…
Q: 1. Explain why the generated voltage decreases when the load current increases.
A: As per our policy we can provide solution of first question only. In the shunt generator, output…
Q: A generating plant has a maximum capacity of 100 kW and costs Rs 1,60,000. The annual fixed charges…
A: Given a generating plant has, Maximum capacity of 100 kW costs Rs 1,60,000 Annual fixed charges are…
Q: ) Wind farm consist of ten wind turbines with nominal capacity of 2MWper turbine, has a total of 20…
A: Capacity factor =Average load / installed capacity. Average load = no. Of units produced / no. Of…
Q: A 30kW series generator has an efficiency of 88% when operating at rated load. If the stray power…
A:
Q: n operating characteristics of wind mill, typically value of rated speed is O 30 Kmph O 35 Kmph O 50…
A: Windmills are used to convert the the air energy into the electrical energy. Generally windmills…
Q: A single-phase energy meter having meter constant of 200 rev/kWh is operating on 230 V, 50 Hz supply…
A: Given: A single phase energy meter having, Meter constant, K=200 revkWh. Operating voltage, V=230 V.…
Q: Q1. A certain power station has the following daily load cycle:- Time In hours (6-8)am (8-12)am…
A:
Q: 1-Efficiency 2- Ripple factor 3- PIV
A: The power electronic circuit which is used to convert ac power to dc power is known as the…
Q: induced emf is equal to rate of change of magnetic flux. 4.a- According to 4.b- In a 3-phase, 4…
A: We need to select correct option for given statement
Q: A generating station has a maximum capacity of 100 kW and costs $300,000. The annual fixed charges…
A: This question belongs to electrical power system. It is about units generated for different load…
Q: Q1. A certain power station has the following daily load cycle:- Time (6-8)am (8-12)am (12-16)pm…
A:
Q: g period. Peak demand is typically measured at 400 kW during the day and 200 kW at night. However,…
A: Service charge for 3 phase is P518. Energy Charge , Total Energy consumed = 126000kWh total energy…
Q: A load of 300 ohms is connected to a 240V DC supply. Determine the power in BTU
A:
Q: c) A batch of 2450 transformers from the production line have a mean output voltage of 215.3 V and…
A: As asked only c) The number of transformers with an output voltage greater than 216.9 V is 695…
Q: 32. The incremental cost characteristics of two generators delivering a load of 200 MW are as…
A:
Q: . A certain power station has the following daily load cycle:- Time (6-8)am (8-12)am (12-16)pm…
A:
Q: In diversified demand the word "diversified" means that the measurements are taken for 35 different…
A: We know that Diversity Factor= Sum of individual Maximum demandMaximum demand of system
Q: 1- Plot the load and duration curves of the power station. 2- Find: (i) Load factor of each load.…
A: 1) Load duration curve of the power plant This curve can be obtained by adding both the load curve…
Q: Energy produced in a power station is 1440 MWh per day. What is the maximum demand of the station if…
A: Given data: Energy produced in power station = 1440 MWh per day Time period = 1 day = 24 hour Load…
Q: Two identical 2000 kVA alternators operate in parallel. The governor of the first machine is such…
A: Since we have to operate both machines without overloading as the frequency drops below 48Hz the…
Q: A generating station has a daily output of 280 MWh and uses 500 tonnes of coal in process. The coal…
A: from the conversion principle 1 tonne = 1000 kg. So 500 tonne= 500000 kg. Energy released per kg = 7…
Q: The total unit cost is 200 TL/meter in the enterprise that uses the phase cost method. The…
A: The power system has to transmit power from the generation side to the load side. For this purpose,…
Q: q1)The following generators are normally using as stand by generators Diesel power generators…
A: Diesel Power generator : Diesel Power generator convert fuel energy into Electrical energy .
Q: 250-kW generator has an efficiency of 89.2 per cent when delivering one -half of rated load.…
A: Given load= 250 kW efficiency = 89.2
12.a. The correct specific gravity range for the electrolyte in a fully charged motive-power battery is
A. 1.240 - 1.260.
B. 1.260 - 1.280.
C. 1.210 - 1.250.
D. 1.280 - 1.325.
12.b. Calculate the individual positive plate capacity in a motive-power cell that has 15 plates and a capacity
of 595 Ah.
A. 85 Ah
B. 75 Ah
C. 110 Ah
D. 90 Ah
Trending now
This is a popular solution!
Step by step
Solved in 2 steps with 2 images
- Consider Figure 3.5. Match the following, those on the left to those on the right. (i) Im (a) Exciting current (ii) Ic (b) Magnetizing Current (iii) Ie (c) core loss currentWhich of the following is NOT a variable in voltametric methods? A. How the current is applied B. How the potential is applied C. The inclusion of convection D. All the above E. Type of working electrodeThree generators are rated as follows: G1: 100MVA, 33kV, xg1 = 0.1pu G2: 150MVA, 32kV, xg2 = 0.08pu G3: 110MVA, 30kV, xg3 = 0.12pu. Determine the reactance of the generator corresponding to base values of 200MVA and 35kV
- 4. With reference to the Paschen curve below, Breakdown voltage (V) 60 55 50 45 40 35 30 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 pd (cm-torr) If a discharge at p = 0.1 torr, d = 20 cm is to be initiated, what is the voltage required to cause a breakdown? What will be the breakdown voltage if p = 0.025 torr, d= 20 cm?Please show full work. Thank youA 6 ampere supply has a frequency of 25 Hz. Find the instantaneous value of current a. at 0.00986sec from zero going to the positive direction. b. at 0.00986 sec from zero going to the negative direction. c. at 986 degrees. Show complete solutions.