Problem-5: In a CD nozzle with a throat area of 0.75 m² of a rocket engine, gas at 7.5 MPa and temperature of 3200 K is in combustion chamber, is expanded fully to (nozzle exit pressure) 10.5 kPa for producing thrust. Assuming flow to be frozen and isentropic, Also, Assume, gamma, y = 1.2 and molecular weight, MW = 24 kg/kmol, Assume, universal gas constant = 8314 J/Kg K mol Determine: (1) the exit Mach number, (2) the maximum exit mass flow rate passing through this nozzle, and (3) the exit area (4) If ambient pressure, i.e. pressure outside nozzle = 10.5 kPa, What is the thrust developed?

Problem-5: In a CD nozzle with a throat area of 0.75 m² of a rocket engine, gas at 7.5 MPa and temperature of 3200 K is in combustion chamber, is expanded fully to (nozzle exit pressure) 10.5 kPa for producing thrust. Assuming flow to be frozen and isentropic, Also, Assume, gamma, y = 1.2 and molecular weight, MW = 24 kg/kmol, Assume, universal gas constant = 8314 J/Kg K mol Determine: (1) the exit Mach number, (2) the maximum exit mass flow rate passing through this nozzle, and (3) the exit area (4) If ambient pressure, i.e. pressure outside nozzle = 10.5 kPa, What is the thrust developed?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Problem 8 Calculate the change in the entropies of the system (AS.99) and the surroundings (ASsur), and the total entropy change (ASotal) when a sample of 1.0 mol of an ideal gas at 300 K and 1.0 bar triples its volume in: a) isothermal reversible expansion b) isothermal expansion against a vacuum (Psurr = 0) c) Will the process in (a) occur spontaneously? What about the process in (b)? Why or why not? %3D
occuring when a process with air, the entropy goes up by 0.60 kJ/kg·K. 11 is the pressure compression ratio. 300K is the initial temperature. What is the final temperature if it is a constant specific heat and if it is a variable specific heat? When Rair = 0.287 and cp = 1.005 kJ/kg·K.
B-A refrigerant-134a is compressed polytropically from 2 bar dry saturated to 10 bar and 60 °C. Calculate the work, heat and change in entropy 05 A-1
(Use Mollier Chart, note: tolerance of temperature & enthalpy is∓1,pressure is ∓0.1, entropy is ∓0.01) Steam at a pressure of 3.5546 Mpa and temperature of 400 degree celsius.Locate the specificenthalpy and specific entropy.
During a process with air, the entropy increases by 0.55 kJ/(kg·K). The pressure compression ratio is 10 and the initial temperature is 300K. Find the final temperature assuming a) constant heat capacities and b) variable heat capacities? (Rair = 0.287 and cp = 1.005 kJ/kg·K)
Ans. 3908 m/min. 14.5 Find the cylinder dimensions of a single-cylinder, double-acting compressor handling 28.32 e/revolution of air from 99.975 kPaa to 723.954 kPaa. Compression and reexpansion are in accordance with PV135 = C. Use the conventional volumetric efficiency; c = 5% and L/D = 1. %3D %3D
There are 5kg/s of CO2 (R=188.96kJ/kg-K, k=1.288) gas compressed polytropically with n=1.2 from 103kPa, 60C to 1200kPa. What is the Work (steady flow) done? (kW)
16.1000CFM of air are compressed at constant temperature of 85°F and 198 psia to 580 psia. For both nonflow and steady flow, compute Jpdv, -J Vdp, AS and AH. 17 Dui Kgm of ovvgen the temperature increases from
8. . Equation for Law of conservation of mass and energy for a nozzle is
One Question more for the solution above : Calculate the location of the normal shock inside the nozzle and the exit flow properties. Thanks :)
Section C 5. (a) Air is compressed in a diesel engine cylinder. The initial pressure and temperature are 105 kN/m and 25 °C respectively, and the final pressure is to be 7 MN/m. In order to ignite the fuel charge injected at the end of compression, the temperature required is 700°E. Calculate the ratio of the initial to final volume for this to be possible. Assumtng that the compression process is polytropic, find the polytropic index of the compression process.
Air as a perfect gas flows in a nozzle, it reaches critical condition at its exit, the nozzle efficiency will be of the nozzle exit velocity, for a stagnation temperature of 500 K. *