Nitrogen gas is contained in a piston/cylinder arrangement as shown below. The frictionless (freely moving) piston keeps the nitrogen at a constant pressure of 200 kPa. Initially, the nitrogen is at 20°C and occupies a volume of 0.01 m³ (State 1). Heat is transferred until the nitrogen reaches 250°C (State 2). Assume ideal gas with the constant specific heats given below to find the following: A) The work done in kJ. Clearly indicate whether work is done on or by the system. B) The heat transferred in kJ. Clearly indicate the direction of heat transfer (into or out of the system).

Nitrogen gas is contained in a piston/cylinder arrangement as shown below. The frictionless (freely moving) piston keeps the nitrogen at a constant pressure of 200 kPa. Initially, the nitrogen is at 20°C and occupies a volume of 0.01 m³ (State 1). Heat is transferred until the nitrogen reaches 250°C (State 2). Assume ideal gas with the constant specific heats given below to find the following: A) The work done in kJ. Clearly indicate whether work is done on or by the system. B) The heat transferred in kJ. Clearly indicate the direction of heat transfer (into or out of the system).

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

E.4) A cylinder and piston assembly contain water at 105°C and 85% quality, with a volume of one liter. The system heats up, causing the piston to rise and encounter a linear spring. At this point the volume is 1.5 liters, the piston diameter is 150 mm, and the spring constant is 100 N/mm. Heating continues, so the piston compresses the spring. Determine the pressure in the cylinder when the temperature reaches 600°C.
The tank of a leaky air compressor originally holds 90 L of air at 33deg C and 225 kPa. During a compression process, 4 grams of air is lost; the remaining air occupies 42 L at 550 kPa. What is the temperature of the remaining in air in degree centigrade.
A cylinder-piston assembly initially contains water at 3 MPa and 300°C. The water is cooled at constant volume to 200 °C, and then compressed isothermally to a final pressure of 2.5 MPa. Sketch the process on a T-v diagram and find the specific volume at the 3 states. [Ans. 0.081l m kg. 0.0811, 1.155x10 m kg]
c. What is the internal energy, u, in kJ/kg of refrigerant R22 at temperature T=-10°C. and specific volume v=0.055 m³/kg? Draw a p-v and T-o diagram and locate the state. What is the phase of the state?
5 ft3 of air is stored in a piston-cylinder device at 53 psia. It is compressed to a final pressure of 145 psia. If the PV= constant during the first path, then followed by a constant volume path until the pressure reached that of state, and finally it restcred to its original state, a. show the P-V relationship through a single diagram. b. calculate the work in each process and the total work, In Btu
For the situations below briefly explain how you obtained the values and provide the numerical answer. A) When 1 kg saturated water vapor is condensed to a saturated liquid water at 325 Kpa, what is the change in its volume? B) What is the specific internal energy liquid water at 280 degree Celsius and 7500 Kpa?
IN THERMODYNAMICS 2: Five kg of water vapor are contained at 150 kPa and 90 percent quality in a suitable enclosure. (a) Calculate the heat in kJ which must be added to produce a saturated vapor (b) What will the pressure be in MPa at the end of the heating process to produce a saturated vapor?
Q3) Initially, 1kg air at 600 K and at 150 kPa is contained in a piston- cylinder device. Now, the system is started to be heated during a quasi-equilibrium process until the temperature of air reaches to 900 K. During the process the pressure inside the cylinder is held constant. Air can be assumed as Ideal Gas under these conditions. La) Calculate the heat provided to the air inside the cylinder during this process. [b) Sketch the P[kPa]-V[m³] diagram of the process. Indicate the direction of the process. No need to express the volume of the air on the diagram. Please do only a rough sketch. Ic) Calculate the work done by the air onto surrounding.
Q.2 a) 5 kg of air undergoes the cyclic process as shown in the figure. Determine the total work done in joules. (3, 8) Isothermal P, bar Adiabatie. (6, --) V, m³
4.8 Saturated steam at 2 MPa is contained in a pistonF cylinder arrangement as shown in the sketch. The initial volume is 0.25 m'. Heat is removed from the steam during a quasi-static, constant-pressure process such that 197.6 kJ of work is done by the surroundings on the steam. Determine the quality of the steam at the final state. Saturated steam at P, V
Q2. Heat is added into a container with electric heater that contains refrigerant-134 at 400 kPa as shown in Figure Q2. At the end of heat addition the pressure in the container has reached to 950 kPa. The volume of the container and mass of the refrigerant are 200 liter 10 kg respectively. (a) Determine the temperature inside the container when heating is completed and show the process change on P-v diagram. (b) The total enthalpy when the heating process is completed. (c) Discuss the condition if the heat addition is continued and pressure reaches 1400 kPa. Figure Q2.
QUESTIOΝ 1: A piston-cylinder arrangement contains 2 kg of steam originally at 200°C and x-0.9. The volume triples while thc temperature is held constant. Pisten Calculate: (a) the final pressure, in MPa, 7,-200 C (c) the change in intermal energy, in kl.