In 2016, about 30 million tons of combustible municipal solid waste (MSW) was generated in the United States. One ton of MSW burned in waste-to-energy plants in the United States, generated about 474 kWh of electricity. If the average annual electricity consumption for a U.S. residential utility customer was 10,399 kilowatthours (kWh). How many households could use this amount of electricity?

In 2016, about 30 million tons of combustible municipal solid waste (MSW) was generated in the United States. One ton of MSW burned in waste-to-energy plants in the United States, generated about 474 kWh of electricity. If the average annual electricity consumption for a U.S. residential utility customer was 10,399 kilowatthours (kWh). How many households could use this amount of electricity?

Sustainable Energy

2nd Edition

ISBN:9781337551663

Author:DUNLAP, Richard A.

Publisher:DUNLAP, Richard A.

Chapter20: Hydrogen

Section: Chapter Questions

Problem 16P

See similar textbooks

Similar questions

A 1000 MW coal fired power plant (30% efficiency). The coal is 75% carbon and has a heat content of 10, 000 BTU/lb. What is the carbon emission (ton carbon per year)?A 1000 MW natural gas plant (45% efficiency). The gas is CH4 with a heat content 800 BTU/mol. What is the carbon emission (ton carbon per year)?Calculate carbon emission reduction if the above natural gas plant is used to replace the coal fired plant.(Here ton is metric ton, 1 ton=2,200 lb)
Problem 3. A nuclear-power station produces 750 MW per year as useful energy. costs include 150 MW lost in distribution, and 290 MW lost as heat. What is the efficiency of the plant? The energy
Consider a 400-MW, 32 percent efficient coal-fired power plant that uses cooling water withdrawn from a nearby river (with an upstream flow of 10-m3/s and temperature 20 °C) to take care of waste heat. The heat content of the coal is 8,000 Btu/lb, the carbon content is 60% by mass, and the sulfur content is 2% by mass. How much electricity (in kWh/yr) would the plant produce each year? How many pounds per hour of coal would need to be burned at the plant? Estimate the annual carbon emissions from the plant (in metric tons C/year). If the cooling water is only allowed to rise in temperature by 10 °C, what flow rate (in m3/s) from the stream would be required? What would be the river temperature if all the waste heat was transferred to the river water assuming no heat losses during transfer? Estimate the hourly SO2 emissions (in kg/h) from the plant assuming that all the sulfur is oxidized to SO2 during combustion.
Problem 10 A homeowner is trying to decide between a high-efficiency natural gas furnace with an efficiency of 95 percent and a ground-source heat pump with a COP of 3.3. The unit costs of electricity and natural gas are $0.112/kWh and $1.44/therm (1 therm = 105, 500 kJ). Determine which system will have a lower energy cost.
An average American consumes approximately 105 kJ of energy per day. The average life expectancy of an American is 77.9 years. How much coal would need to be burned to provide enough energy to meet a person's energy demands if the efficiency of energy production from coal is 38%? ☐g coal
Calculate the total mass of CO2 in the atmosphere. State all assumptions. Compare this to the actual of ~3.6 ×1012 tonnes. At our current rate of emissions, how long would it take to emit a quantity equal to the present mass of CO2 in the atmosphere
According to the Energy Information Administration, Dept, of Energy, which country produced the largest amount of CO2 emissions from the burning of fossil fuels, in Gt in 2006?
When 1 cu ft of natural gas is burned, 1,050 Btu of heat are produced. In oneday, a building uses 761,250 Btu of heat. How many cubic feet of gas areburned?
An anaerobic digestion system generates 10,000 m3 (353,150 standard ft3) of biogas per day. The produced biogas is to be used in an engine generator for generating electricity for wastewater treatment plant operations. How much electricity can be generated from the biogas? Answer: 21,795 kWh/day.
The levelized cost of energy (LCOE) for coal-fired electricity is about $0.09/kWh. Suppose the capital cost of the plant is $600 million and it operates for 40 years with a capacity factor of 95%. What is the contribution of CAPEX to LCOE? Given the difference you (hopefully) find, what contributes the remaining costs?
Determine the amount of SO2 released from the combustion of 1500 gallons of waste oil (135,000 BTU/gal) with 1.6 wt % S. The oil has a specific gravity of 0.86. How much reduction would this need to meet NSPS for a 125 MW electric utility steam generation source (35% efficiency)?
A new coal-fired power plant has been built using a sulfur emission control system that is 70 percent efficient. If all of the sulfur oxidizes to SO2 and if the emission of SO2 are lmited to 0.6 lb SO2 per million Btu of heat into the power plant, what maximum percent sulfur content can the fuel have if 15,000 Btu/lb coal is burned?