If it takes 50 s to fill the 10 - gallon bucket with water by a garden hose attached with a nozzle. The inner diameter of the hose is 2 cm, and it reduces to 0.75 cm at the nozzle exit, determine (a) the volume and mass flow rates of water through the hose, and (b) the average velocity of water at the nozzle exit. Norale Ganden Bucket hose

If it takes 50 s to fill the 10 - gallon bucket with water by a garden hose attached with a nozzle. The inner diameter of the hose is 2 cm, and it reduces to 0.75 cm at the nozzle exit, determine (a) the volume and mass flow rates of water through the hose, and (b) the average velocity of water at the nozzle exit. Norale Ganden Bucket hose

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Disregard the velocity at the entrance
If water enters the nozzles of a hydraulic turbine at 550 kPa. Determine the maximum exit velocity which is being accelerated to by the nozzles. Water m/s 1 Turbine nozzzle 2 101.3 kPa
The change of enthalpy of air in a cooling tower is 53 Btu/lb and the mass flow of air is 435.71 lb/min. Water enters the tower at the rate of 50 gpm and 115 °F. Determine the exit temperature.
While traveling on a dirt road, the bottom of a car hits a sharp rock and a small hole develops at the bottom of its gas tank. If the height of the gasoline in the tank is 30 cm, determine the initial velocity of the gasoline at the hole. Discuss how the velocity will change with time and how the flow will be affected if the lid of the tank is closed tightly.
Hi, please help me with this problem urgently.
need correctly and urgently
Water at 20°C is flowing through a horizontal nozzle at a flow rate of 0.005 m3/s. At the nozzle inlet, the diameter is 5 cm and the pressure is 200 kPag. The nozzle discharges freely to outside air. Determine the velocity of the water (in m/s) as it exits the nozzle. Assume negligible head losses through the nozzle.
A pump increases the water presssure from 8kPa at the inlet to 700 kPa at the outlet. Water enters this pump at 41.51 degrees celsius through a 1.145-cm-diameter opening and exits through a 2.821-cm-diameter opening. Determine the velocity of the water at the outlet in m/s when the mass flow rate through the pump is 1.354kg/s. The specific volume of incoming water is 1.547x10-3m3/kg.