A steel pipe of length L = 4.0 ft, outside diameter d₂ = 6.0 in., and inside diameter d₁ = 4.5 in. is compressed by an axial force P = 140 kip. The material has a modulus of elasticity E = 30,000 ksi and Poisson's ratio v = 0.30. Determine the following quantities for the pipe: (a) the shortening 6, (b) the lateral strain € lat, (c) the increase in the outer diameter 4d₂ (e) the modulus of rigidity G Reminder: ksi = 1000 psi, and kip = 1000 lbf P -d₁-

A steel pipe of length L = 4.0 ft, outside diameter d₂ = 6.0 in., and inside diameter d₁ = 4.5 in. is compressed by an axial force P = 140 kip. The material has a modulus of elasticity E = 30,000 ksi and Poisson's ratio v = 0.30. Determine the following quantities for the pipe: (a) the shortening 6, (b) the lateral strain € lat, (c) the increase in the outer diameter 4d₂ (e) the modulus of rigidity G Reminder: ksi = 1000 psi, and kip = 1000 lbf P -d₁-

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.2.6P: A rubber ball (sec figure) is inflated to a pressure of 65 kPa. At that pressure, the diameter of...

See similar textbooks

Similar questions

An clement of material in plane strain (see figure) is subjected to strains ex= 480 × 10-6, Ey= 70 × l0-6, and yxy= 420 × l0-6. Determine the following quantities: (a) the strains for an element oriented at an angle 0 = 75°, (b) the principal strains, and (c) the maximum shear strains. Show the results on sketches of properly oriented elements.
A rubber ball (sec figure) is inflated to a pressure of 65 kPa. At that pressure, the diameter of the ball is 240 mm and the wall thickness is 1.25 mm. The rubber has a modulus of elasticity E = 3,7 MPa and Poisson's ratio v = 0.48. (a) Determine the maximum stress and strain in the ball, (b) If the strain must be limited to 0.425, Find the minimum required wall thickness of the ball.
Find the value of strain stress 30 MPa Modulus of elasticity=65 MPa
A steel pipe of length L= 5 ft, outside diameter d₂= 9.3 in., and inside diameter d₁= 5.1 in. is compressed by an axial force P= 577 kips. The material has Poisson's ratio v=0.30. Determine the increase in inner diameter. A
6 m A cylindrical pressure vessel contains a gas at a pressure of 6.0 MPa. The cylinder, which has an inner radius of 1200 mm and a wall thickness of 20 mm, is fabricated from steel [E = 200GP%; v = 0.30]. The cylindrical portion is 6 m long, ignore the hemispherical end- caps of the tank. corresponding strains in the tank. Using Hooke's Law, determine the MPa Onoop MPа Olong με Elong με Enoop
For a given homogeneous, isotropic, linearly elastic material, E = 15e6 psi and v= 0.3. Solve for the shear modulus.
Q1) Bar (1) of length 2.8 m and bar (2) of length 0.73 m are fixed at ends A and C. There is a A = 3.5 mm gap between bar (2) and the rigid plate at B. Load P is applied to plate B and as a result of that, bar (1) elongates and bar (2) get compressed. If the normal strain in bar (1) is 2429 um/m, find the normal strain in bar (2). (1) P, (2) A P 2.8 m 0.73 m
A strain gage is mounted to the outer surface of a thin-walled boiler. The boiler has an inside diameter of 1820_mm and a wall thickness of 18 mm, and it is made of stainless steel [E = 179 GPa; v = 0.3]. Determine: (a) the internal pressure in the boiler when the strain gage reads 210 µɛ. (b) the maximum shear strain in the plane of the boiler wall. (c) the absolute maximum shear strain on the outer surface of the boiler. Answers: (a) p = i MPа. (b) Ymax in-plane = i prad. (c) Yabs max i prad. =
A thin steel cylinder 1.3 m long is subjected to internal pressure, the change in volume owing to the pressure is 17.5 x 10 m³ of the original volume 65.5 x 103 m³. De termine the internal diameter, hoop, and longitudinal stresses. For the cylinder material E = 210 GIN/m², v = 0.3. de 253 What will be the bulk modulus K, if the internal pressure is 14 bar and the extra fluid is 6 * 10 m³ at the same diameter, thickness, and original volume of part (a).
The strain in the x-direction at point A (shown in fig.) on the steel beam is measured and found to be ɛx = 139 x 106. The shear strain at point A is found to be yxY = R x 10° radians. The magnitude R is given by: (Take E= 204 GPa and Poisson's ratio =0.3). The cross-section of the beam is rectangular with depth 400mm and width 200mm respectively 100m 4ocmm 40om 600mnın 1000 mm 200mm
Consider the vessel in which the wall thickness of the cylindrical and hemispherical portions has a ratio of (tc/ts) = 2.6, when hemispherical hoop strain is 60 µɛ and E = 200 GPa find: (a) hemispherical hoop stress.(b) cylindrical hoop stress.(c) cylindrical longitudinal stress.(d) if the vessel diameter is 25 cm and wall thickness is 10 mm, find the pressure inside the vessel.
124,000s o(2) 0 s85 0.03 (o in MPa) 1+ 300ɛ (a) Find the axial normal strain in the cable and its elongation due to the load W = 6.8 kN. (b) If the forces are removed, what is the permanent set of the cable? Hint: Start with constructing the stress-strain dia- gram and determine the modulus of elasticity, E, and the 0.2% offset yield stress. D 2 m A 1.5 m B 1.5 m E m--1 m- 0.75 m 0.25 m W = 6.8 kN