A reducing elbow is used to deflect water flow at a rate of 30 kg/s in a horizontal pipe upward by an angle e = 45° from the flow direction while accelerating it. The elbow discharges water into an atmosphere. The cross sectional area of the elbow is 150 cm² at the exist. The elevation difference between the centers of the exist and the inlet is 40 cm. The mass of the elbow and the water is 50 kg. Determine the anchoring force needed to hold the elbow in place. (Ans: 1.18 kN) 0 cm Water

A reducing elbow is used to deflect water flow at a rate of 30 kg/s in a horizontal pipe upward by an angle e = 45° from the flow direction while accelerating it. The elbow discharges water into an atmosphere. The cross sectional area of the elbow is 150 cm² at the exist. The elevation difference between the centers of the exist and the inlet is 40 cm. The mass of the elbow and the water is 50 kg. Determine the anchoring force needed to hold the elbow in place. (Ans: 1.18 kN) 0 cm Water

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A reducing elbow is used to deflect water flow at a rate of 14 kg/s in a horizontal pipe upward 30°. The elbow discharges water into the atmosphere. The difference between the centers of the outlet and the inlet is 30 cm. The weight of elevation the elbow and the water in it is considered to be negligible. Determine the anchoring force (F) needed to hold the elbow in Rx place. Given that other force F acts on the elbow which is equal 500 N A=7 cm 2. A-113 cm 30 cm
The adjacent picture shows a pipe section in which a reduction sleeve (nozzle) is connected to the pipe by a flanged bolted connection. You have D1=8 cm, D2=5 cm, and the water is at 20C. Point 2 is open to the atmosphere. Consider that the specific mass of the water is 1,000 kg/m3, and that the momentum flux correction factor is unity. If V1=5 m/s and the mercury manometer indicates that h=58 cm, determine the reaction force on the flange bolts.
A reducing elbow in a horizontal pipe is used to deflect water flow by an angle 8= 45° from the flow direction while accelerating it. The elbow discharges water into the atmosphere. The cross-sectional area of the elbow is 150 cm² at the inlet and 25 cm2 at the exit. The elevation difference between the centers of the exit and the inlet is 40 cm. The mass of the elbow and the water in it is 56 kg. Determine the anchoring force needed to hold the elbow in place. Take the momentum-flux correction factor to be 1.03 at both the iniet and the outlet. The density of water is 1000 kg/m³, and the flow rate of water is 30 kg/s. Waters 30.0 kg/s 150 cm- 25 cm² 45° 40 cm The anchoring force needed to hold the elbow in place is The resultant direction of force is KN
In this situation, a 90 degree elbow pipe is used to direct water flow in an upwards direction, at a rate of 40 kg/s. Here the diameter of the elbow is 10cm. The water is discharged into the atmosphere and the pressure at exit is at the local atmospheric pressure. Additionally the elevation difference between the centers of exit and inlet of the bend is 50cm. Here, the weight of the elbow pipe and the water is neglible, and the momentum-flux correction factor is 1.03 at both the oulet and inlet. How would I determine the gage pressure at the center of the inlet of the elbow? How much anchoring force would be needed to hole the elbow in place. Any help would be greatly appreciated :)
A three-arm sprinkler is used to water a garden by rotating in a horizontal plane. Water enters the sprinkler along the axis of rotation at a rate of 40 L/s and leaves the 1.2-cm-diameter nozzles in the tangential direction. The central sprinkler bearing applies a retarding torque of 50 N-m due to friction at the anticipated operating speeds. Part A For a normal distance of 40 cm between the axis of rotation and the center of the nozzles, determine the rate of rotation of the sprinkler. Express your answer to three significant figures. V ΑΣφ I1 vec ? W = rad/s Submit Request Answer
(3) The cart shown below is restrained from moving by a cable connected to a fixed wall. The tank has a circular cross section of diameter D and the flow exit has a circular cross section of diameter Do. Do not assume that H(t) is constant. The fluid has density p and the exit is open to the atmosphere. Wall H D- Do Cable Vo (1) Determine H(t) and the exit velocity Vo(t). (2) Determine the tension in the cable as a function of time Your answers should be in terms of given parameters (D, Do, p, g) о,
A reducing elbow is used to deflect water flow at a rate of 840 kg/min in a horizontal pipe upward 30.0while accelerating it, as shown in Fig. 1. The elbow discharges water into the atmosphere. The cross-sectional area of elbow is 113 cm2at the inlet and 700 mm2at the outlet. The elevation difference between the centers of the outlet and the inlet is 300 mm. The weight of the elbow and thewater in it is considered to be negligible. The density of water is 1000 kg/m3. Determine (a) the gage pressure at the center of the inlet of the elbow and (b) the anchoring force needed to hold the elbow in place.
The water enters the sprinkler nozzles with a flow rate of 50 liters / hour in the vertical axis direction and leaves the sprinkler nozzles as 25mm diameter jets and making θ angle with the tangential direction as shown in the figure. The length of the sprinkler arms is 0.45 m. Without considering friction effects; For θ = 75 °, set the rotational speed in rpm.
6-22 A 90° elbaw is used to direct water flow at a rate of 25 kgis in a horizontal pipe upward. The diameter of the entire elbow is 10 cm. The elbow discharges water into the atmosphere, and thus the pressure at the exit is the local atmospheric pressure. The elevation difference between the centers of the exit and the inlet of the elbow is 35 cm. The weight of the elbow and the water in it is considered to be negligible. Determine (a) the gage pressure at the center of the inlet of the elbow and (b) the anchoring force needed to hold the elbow in place. Take the momentum-flux correction factor to be 1.03. 35 cm Water 25 kg/s
A pipe of diameter 10cm conveying 200 liters/s of water has bend of angle (θ = 90⁰) and θ = 0⁰ through horizontal plane. Find theresultant force exerted on the bend if the pressure at the inlet and outlet of the bend are 15N/cm2 and 10 N/cm2respectively
The water flow rate through the vertical bend shown in the figure is 2.83 m³/s. Calculate the magnitude, direction, and location of the resultant force of the water on the pipe bend. (Hint: use conservation of mass, followed by Bernoulli equation, and then complete the solution by using conservation of momentum in x- and y-direction.) 0.9 m d-- 1.05 m 34.5 kPa 0.9 m d-
A single-acting reciprocating pump has piston diameter 12 cm and stroke length of 30cm. The center of the pump is 5m above the water level sump. The diameter and length of suction pipe are 7.5cm and 8m respectively. The separation occurs if the absolute pressure head in the cylinder during suction stroke falls below 2.5 m of water. Calculate the maximum speed at which the pump can run without separation. Take atmospheric pressure head = 10.3 m of water.