A power system consists of 400 buses out of which 30 buses are generator bus. 40 buses are the ones with reactive power support and 15 buses are the ones with fixed shunt capacitors. All other remaining buses are load buses. It is proposed to perform a load flow analysis in the system, using Newton-Raphson method, then size of Jacobian matrix is

A power system consists of 400 buses out of which 30 buses are generator bus. 40 buses are the ones with reactive power support and 15 buses are the ones with fixed shunt capacitors. All other remaining buses are load buses. It is proposed to perform a load flow analysis in the system, using Newton-Raphson method, then size of Jacobian matrix is

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter14: Power Distribution

Section: Chapter Questions

Problem 14.17P

See similar textbooks

Similar questions

Following figure shows the one-line diagram of a two bus system. Take bus 1 as slack bus, bus 2 as load (PQ) bus. Neglect the shunt charging admittance. Obtain the bus admittance matrixYBUs and find V₂ and 62, power flows and line losses using FDLF method. All the values are given in per unit on 100MVA base. Use a tolerance of 0.001 for power mismatch. 1 Z12= 0.12+10.16 Slack bus V₁ 1.0/0⁰ pu 2 PL2=1.0pu Q12=0.5pu
A DC Optimal Power Flow problem is to be solved for a 3-bus network. The per-unit reactances of the lines interconnecting the buses are as follows: X12 = 0.1pu, X13 = 0.12 pu and X23 = 0.2 pu. There is a generator at each bus. The loads at buses 1, 2 and 3 are 150MW, 200mw, and 100MWrespectively. Bus 1 is taken as the reference bus, and SBase = 100 MVA. Which one of the below is a constraint of the DCOPF problem? Select one: O a. None of these O b. -500 0₂-1000 03 = P3 - 110 O c. 1500 0₂-500 03 = P₂ - 220 O d. 1500 0₂-500 03 = P₂ - 200 O e. -500 0₂-1000 03 = P3 - 150 O f. -1500 8₁-1000 03 = P₁ - 150
Q2. Figure Q2 shows the single-line diagram. The scheduled loads at buses 2 and 3 are as marked on the diagram. Line impedances are marked in per unit on 100 MVA base and the line charging susceptances are neglected. a) Using Gauss-Seidel Method, determine the phasor values of the voltage at load bus 2 and 3 according to second iteration results. b) Find slack bus real and reactive power according to second iteration results. c) Determine line flows and line losses according to second iteration results. d) Construct a power flow according to second iteration results. Slack Bus = 1.04.20° 0.025+j0.045 0.015+j0.035 0.012+j0,03 3 |2 134.8 MW 251.9 MW 42.5 MVAR 108.6 MVAR
A DC Optimal Power Flow problem is to be solved for a 3-bus network. The per-unit reactances of the lines interconnecting the buses are as follows: X12 = 0.25 pu, X13 = 0.15 pu and X23 = 0.2 pu. There is a generator at each bus. The loads at buses 1, 2 and 3 are 125 MW, 300 MW and 100 MW respectively. Bus 1 is taken as the reference bus, and SBase = 100 MVA. Which one of the below is NOT a constraint of the DCOPF problem? Select one: O a. -400 02 - 666.67 03 = P, - 125 O b. None of these C. -500 02 - 1166.67 03 = P3 - 100 d. 900 02 - 500 03 = P2 - 300
A network consisting of a set of generator and load buses is to be modeled with a DC power flow, for the sake of conducting a contingency analysis. The initial flows calculated with the DC power flow give the following information: f°2-4 = - 65.3 MW and fº4-5 = 13.6 MW. The following values of LODF and PTDF factors are given: PTDF54,2-4 = -0.2609, LODF2-4,4-5 = -0.6087. Calculate the contingency flow on line 2-4 due to outage of line 4-5. Select one: O a. -75.5MW O b. None of these O c. -68.85MW O d. -73.58MW O e. 75.5MW O f. -61.75MW
The figure below shows the one-line diagram of a four- bus power system. The voltages, the scheduled real power and reactive powers, and the reactances of transmission lines are marked at this one line diagram (The voltages and reactances are in PU referred to 100 MW base. The active power P2 in MW is the last three digits (from right) of your registration number (i.e for the student that has a registration number 202112396, P2 =396). [10] Starting from an estimated voltage at bus 2, bus 3, and bus 4 equals V2 (0) = 1.15<0°, V3 = 1.15 < 0°, V4 1.1< 0°. 1- Specify the type of each bus and known & unknown quantities at each bus. 2- Find the elements of the second row of the admittance matrix (i.e. [Y21 Y22 Y23 Y24]). 3- Using Gauss-Siedal fınd the voltage at bus 2 after the first iteration. 4- Using Newton-Raphson, calculate: |- The value of real power (P2), at bus 2 after the first iteration. Il- The second element in the first row of the Jacobian matrix after the first iteration. 2 P2…
please solve for nodal stress method. (if it is possible to apply supernodes)
How do we handle a PV bus in the Gauss Seidel Method? What will happen to the bus voltage if the reactive power at a PV bus exceeds the upper bound? And why?
Description The single line diagram of figure below shows a generator connected through parallel transmission line to a large metropolitan system considered as an infinite bus. The machine is delivering 1.0 per-unit power and both the terminal voltage and the infinite-bus voltage are 1.0 per unit. Numbers of the diagram indicate the values of the reactances on a common system base. The transient reactance of the generator is 0.2x per unit as indicated. Determine the power-angle equation for the given system operating conditions. When a three-phase fault occurs at point P, and the fault on the system is cleared by simultaneous opening of the circuit breakers at each end of the affected line, determine the power angle equation and the swing equation for the during fault and post-fault period. Take H= 5.5Q Mj/MVA. (Roll=PQXY) j0.5, j0.1y O X = 0.2X P j0. 5,
The given zero sequence matrix is known. .At bus 1 there is a single generator connected with sequence reactance O of. j2 ohms. At bus 2, there are two motors connected, M1 and M2, each with zero sequence reactance of j2 ohms. j2 ohms zero sequence reactance. Motor M2 at bus 2 is solidly grounded.. For these conditions: a. Determine whether or not the generator at bus 1 is grounded. b. Establish the value of the grounding of motor M1. ZBUS (0) Z11 =j 11.42857 Z12 =j 1.42657 Z22 j1.42857 =
Why the elements of Jacobian matrix belong to derivative of reactive power of a voltage controlled bus with respect to angle and magnitude of voltage is equal to zero.
A DC Optimal Power Flow problem consists of a 3-bus network. The per-unit reactances of the lines interconnecting the buses are as follows: X₁2 = 0.35 pu, X₁3 = 0.25 pu and X23 = 0.1 pu. Bus 2 is taken as the reference bus, and SBase = 125 MVA. The power flow limit on transmission line 2-3 is 500 MW. Which one of the below is the constraint that needs be incorporated in the DCOPF problem to account for line 2-3 transmission capacity limit? Select one: O a. 03 -0.6 rad O b. 03 = -0.4 rad О с. 500 (0₁.03) 500 O d. 03 -0.5 rad О е. ņ 1000 (0₂.03) = 500 Of. None of these 27 201