1 a.
Ascertain the productivity profile for 20x1 using actual inputs.
1 a.
Explanation of Solution
Productivity measurement: The productivity measurement refers to the quantitative assessment of the changes in the productivity.
Profile measurement and analysis: The profile measurement and analysis refers to the computation of a set of operational partial productivity measures and their comparison to the corresponding set of base period, for the assessment of the nature of changes in productivity.
Compute the productivity profile for 20x1:
Compute the Material Productivity Profile for 20x1:
Compute the Labor Productivity Profile for 20x1:
The Material Productivity Profile is 1.67 and Labor Productivity Profile is 0.83.
1 b.
Ascertain the productivity profile for 20x2 for the proposed process changes.
1 b.
Explanation of Solution
Compute the productivity profile for 20x2 Change 1:
Compute the Material Productivity Profile for 20x2 Change 1:
Compute the Labor Productivity Profile for 20x2 Change 1:
The Material Productivity Profile is 1.43 and Labor Productivity Profile is 1.25.
Compute the productivity profile for 20x2 Change 2:
Compute the Material Productivity Profile for 20x2 Change 2:
Compute the Labor Productivity Profile for 20x2 Change 2:
The Material Productivity Profile is 2.00 and Labor Productivity Profile is 1.00.
There is an overall improvement in the output input ratio from 20x1 to 20x2.
1 c.
Ascertain the productivity profile for optimal input combination and recommend the most productive profile.
1 c.
Explanation of Solution
Compute the productivity profile for optimal input combination:
Compute the Material Productivity Profile for optimal input combination:
Compute the Labor Productivity Profile for optimal input combination:
The Material Productivity Profile is 2.50 and Labor Productivity Profile is 1.25.
There is an overall improvement in the output input ratio from 20x1 to 20x2. The change 1 in 20x2 has the optimum labor productivity, however the material productivity is very low. In the Change 2 of 20x2, both material and labor productivity are good. Now for the decision regarding the implementation of the productivity profile, this depends on the productivity trade-offs of the inputs.
2.
Ascertain the productive inefficiency among the given combinations and compare the improvement along with the changes in the technical and
2.
Explanation of Solution
Total productive efficiency: The total productive efficiency refers to the point where the maximum technical and allocative efficiency is achieved. This is the point where the production of a new product may compromise the production of another product, as the optimum quantity of inputs is being used to get the desired output.
The technical efficiency ensures no more units of input than the required number is used for any mix of inputs.
The allocative efficiency ensures the use of an inexpensive and most technically efficient mix.
Compute the total cost of productive efficiency:
Particulars |
Number of Units (A) | Cost per Unit (B) | |
20x1 | |||
Cost of materials | 33,000 | $ 60 | $ 1,980,000 |
Cost of labor | 66,000 | $ 15 | $ 990,000 |
Total Cost | $ 2,970,000 | ||
20x2 Change 1 | |||
Cost of materials | 38,500 | $ 60 | $ 2,310,000 |
Cost of labor | 44,000 | $ 15 | $ 660,000 |
Total Cost | $ 2,970,000 | ||
20x2 Change 2 | |||
Cost of materials | 27,500 | $ 60 | $ 1,650,000 |
Cost of labor | 55,000 | $ 15 | $ 825,000 |
Total Cost | $ 2,475,000 | ||
Optimal Input | |||
Cost of materials | 22,000 | $ 60 | $ 1,320,000 |
Cost of labor | 44,000 | $ 15 | $ 660,000 |
Total Cost | $ 1,980,000 |
Table (1)
Compute the total cost of productive inefficiency:
Compute the cost of productive inefficiency for 20x1:
Compute the cost of productive inefficiency for 20x2 Change 1:
Compute the cost of productive inefficiency for 20x2 Change 2:
Compute the potential improvement:
Compute the potential improvement for 20x2 Change 1:
Compute the potential improvement for 20x2 Change 2:
The Change 1 has greater technical efficiency but the allocative efficiency is reduced, on the other hand Change 2 is able to attain both technical and allocative efficiency.
3.
Compute and describe the price recovery component.
3.
Explanation of Solution
Profit-linked productivity measurement and analysis: The profit-linked productivity measurement and analysis is the ascertainment of the amount of change in profit, from the base period to the current period, due to the various changes in the productivity.
Compute the profit-linked productivity measurement:
Compute the profit-linked productivity measurement for 20x2 Change 1:
Compute the profit-linked productivity measurement for 20x2 Change 2:
The profit-linked productivity measurement takes into consideration only the changes in the input with no regards to the base or optimal combination.
Want to see more full solutions like this?
Chapter 15 Solutions
EBK CORNERSTONES OF COST MANAGEMENT
- Gunston Processing produces two products, ALT-1 and ALT-2, from a batch using a single raw material, ALT-O. Both products require further processing before they be can be sold. A batch of ALT-1 can be sold for $150,250 after processing costs of $31,000. A batch of ALT-2 can be sold for $240,100 after further processing. The cost of ALT-O is $200,000 for a batch. Using the estimated net realizable value method, a joint cost of $120,000 was allocated to ALT-2 for a batch Required: Compute the separable processing cost for a batch of ALT-2 Note: Do not round intermediate calculations. Processing costarrow_forwardCOLORADO INC. is a chemical manufacturer that supplies various products to industrial users. The company plans to introduce a new chemical solution, called Nysap, for which it needs to develop a standard product cost. The following information is available on the production of Nysap: Nysap is made by combining a chemical compound (nyclyn) and a solution (salex), and boiling the mixture. A 20% loss in volume occurs for both the salex and the nyclyn during boiling. After boiling, the mixture consists of 9.6 liters of salex and 12 kilograms of nyclyn per 10-liter batch of Nysap. After the boiling process is complete, the solution is cooled slightly before 5 kilograms of protet are added per 10-liter batch of Nysap. The addition of the protet does not affect the total liquid volume. The resulting solution is then bottled in 10-liter containers. The finished product is highly unstable, and one10-liter batch out of six is rejected at final inspection. Rejected batches have no commercial…arrow_forwardGunston Processing produces two products, ALT-1 and ALT-2, from a batch using a single raw material, ALT-O. Both products require further processing before they be can be sold. A batch of ALT-1 can be sold for $150,000 after processing costs of $30,000. A batch of ALT-2 can be sold for $240,000 after further processing. The cost of ALT-0 is $200,000 for a batch. Using the estimated net realizable value method, a joint cost of $120,000 was allocated to ALT-2 for a batch. Required: Compute the separable processing cost for a batch of ALT-2. Processing cost hsarrow_forward
- CleanTech manufactures equipment to mitigate the environmental effects of waste. (a) If Product A has fixed expenses of $15,000 per year and each unit of product has a $0.20 variable cost, and Product B has fixed expenses of $5000 per year and a $0.50 variable cost, at what number of units of annual production will A have the same overall cost as B? (b) As a manager at CleanTech what other data would you need to evaluate these two products?arrow_forwardBrandon Machines manufactures a number of products from the same raw material. Joint processing costs total $10,000. Product A could be sold at the cut-off point for $18,000 or it can be further processed at a cost of $9,000 and then sold for $35,000. Brandon should: Further process product A because its incremental revenues will exceed incremental costs by $8,000. Further process product A because its incremental revenues will exceed incremental costs by $26,000. Sell as-is because the incremental loss is $2,000 if processed further. Further process product A because its incremental revenues will exceed incremental costs by $16,000. Further process because the incremental revenues will be $35,000.arrow_forwardA process control manager is considering two robots to improve materials handling capacity in the production of rigid shaft couplings that mate dissimilar drive components. Robot X has a first cost of $84,000, an annual M&O cost of $31,000, a $40,000 salvage value, and will improve revenues by $96,000 per year. Robot Y has a first cost of $146,000, an annual M&O cost of $28,000, a $47,000 salvage value, and will increase revenues by $119,000 per year. The company’s MARR is 15% per year and it uses a 3-year study period for economic evaluations. Which one should the manager select (a) on the basis of ROR values, and (b) on the basis of the incremental ROR value? (c) Which is the correct selection basis? Perform the analysis by hand or spreadsheet, as instructed.arrow_forward
- Alderon Enterprises is evaluating a special order it has received for a ceramic fixture to be used in aircraft engines. Alderon has recently been operating at less than full capacity, so the firm's management will accept the order if the price offered exceeds the costs that will be incurred in producing it. You have been asked for advice on how to determine the cost of two raw materials that would be required to produce the order. A) The special order will require 800 gallons of Endor, a highly perishable material that is purchased as needed. Alderon currently has 1,200 gallons of Endor on hand, since the material is used in virtually all of the company's products. The last time endor was purchased, Alderon paid $5.00 per gallon. However, the average price paid for the endor in stock was only $4.75. The market price for the Endor is quite volatile, with the current price at $5.50. If the special order is accepted, Alderon will have to place a new order next week to replace the…arrow_forwardKagle design engineers are in the process of developing a new “green” product, one that will significantly reduce impact on the environment and yet still provide the desired customer functionality. Currently, two designs are being considered. The manager of Kagle has told the engineers that the cost for the new product cannot exceed $550 per unit (target cost). In the past, the Cost Accounting Department has given estimated costs using a unit-based system. At the request of the Engineering Department, Cost Accounting is providing both unit- and activity-based accounting information (made possible by a recent pilot study producing the activity-based data). Unit-based system:Variable conversion activity rate: $100 per direct labor hourMaterial usage rate: $20 per partABC system:Labor usage: $15 per direct labor hourMaterial usage (direct materials): $20 per partMachining: $75 per machine hourPurchasing activity: $150 per purchase orderSetup activity: $3,000 per setup hourWarranty…arrow_forwardTwo different manufacturing processes are being considered for making a new product. The first process is less capital-intensive, with fixed costs of only $48,800 per year and variable costs of $730 per unit. The second process has fixed costs of $407,000 but variable costs of only $195 per unit. a. What is the break-even quantity, beyond which the second process becomes more attractive than the first? The volume at which the second process becomes more attractive is units. (Enter your response rounded to the nearest whole number.) b. If the expected annual sales for the product is 820 units, which process would you choose? O A. Since the production volume at which the second manufacturing process becomes more attractive is lower than the expected annual sales for the product, you should choose the second manufacturing process. O B. Since the production volume at which the second manufacturing process becomes more attractive is higher than the expected annual sales for the product, you…arrow_forward
- Mohave Corporation is considering outsourcing production of the umbrella tote bag included with some of its products. The company has received a bid from a supplier in Vietnam to produce 8,900 units per year for $7.50 each. Mohave the following information about the cost of producing tote bags: Direct materials Direct labor Variable manufacturing overhead Fixed manufacturing overhead Total cost per unit Mohave determined all variable costs could be eliminated by outsourcing the tote bags, while 70 percent of the fixed overhead cost is unavoidable. At this time, Mohave has no specific use in mind for the space currently dedicated to producing the tote bags. Required: 1. Compute the difference in cost between making and buying the umbrella tote bag. 2. Based strictly on the incremental analysis, should Mohave buy the tote bags or continue to make them? 3-a. Suppose the space Mohave currently uses to make the bags could be utilized by a new product line that would generate $12,000 in…arrow_forwardA chemical company is considering two types of incinerators to burn solid waste generated by a chemical operation. Both incinerators have a burning capacity of 20 tons per day. The following data have been compiled for comparison of the two incinerators: If the firm's MARR is known to be 13%. determine the processing cost per tonof solid waste for each incinerator. Assume that incinerator B will be availablein the future at the same cost.arrow_forwardStahman, Inc., estimates its hidden external failure costs using the Taguchi loss function. Stahlman produces plastic sheets that vary in thickness and grade. For one of its large-volume products, it was determined that k = 30,000 and T = 0.28 inches in diameter. A sample of four units produced the following values: Required: 1. Calculate the average loss per unit. 2. Assuming that 100,000 units were produced, what is the total hidden cost? 3. Assume that the multiplier for Stahmans hidden external failure costs is six. What are the measured external costs? Explain the difference between measured costs and hidden costs.arrow_forward
- Cornerstones of Cost Management (Cornerstones Ser...AccountingISBN:9781305970663Author:Don R. Hansen, Maryanne M. MowenPublisher:Cengage LearningManagerial Accounting: The Cornerstone of Busines...AccountingISBN:9781337115773Author:Maryanne M. Mowen, Don R. Hansen, Dan L. HeitgerPublisher:Cengage LearningEssentials of Business Analytics (MindTap Course ...StatisticsISBN:9781305627734Author:Jeffrey D. Camm, James J. Cochran, Michael J. Fry, Jeffrey W. Ohlmann, David R. AndersonPublisher:Cengage Learning
- Managerial AccountingAccountingISBN:9781337912020Author:Carl Warren, Ph.d. Cma William B. TaylerPublisher:South-Western College Pub