Problems 33 and 34 are paired. One end of a uniform beam that weighs 2.80 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in Figure P14.33. Find the tension in the cable. FIGURE P14.33 Problems 33 and 34.

Check Your Understanding A 400.0-N sign hangs from the end of a uniform strut. The strut is 4.0 m long and weighs 600.0 N. The strut is supported by a hinge at the wall and by a cable whose other end is tied to the wall at a point 3.0 m above the left end of the strut. Find the tension in the supporting cable and the force of the hinge on the strut.

A uniform ladder of length L and mass m1 rests against a frictionless wall. The ladder makes an angle with the horizontal. (a) Find the horizontal and vertical forces the ground exerts on the base of the ladder when a firefighter of mass m2 has climbed a distance x along the ladder from the bottom. (b) If the ladder is just on the verge of slipping when the firefighter is a distance d along the ladder from the bottom, what is the coefficient of static friction between ladder and ground?

A metal rod of mass M = 6 kg and length L = 0.5 m, is attached at one end by a hinge to a vertical wall. It is initially supported at the other end so that it is in static equilibrium and lies horizontally.    (a) (i) Determine the magnitude and direction of the force on the bar due to the support.       (ii) Determine the magnitude and direction of the force on the bar due to the hinge.   (b) Show that the moment of inertia of the bar about the end that is attached to the wall is IH = 0.5 kg m2   (c) The support is removed and the bar swings down about the end attached to the hinge. What is the acceleration of a point on the end of the rod just after the support is removed (at this instant the acceleration vector will point directly down)? Give your result in terms of g.

One end of a uniform rod of weight w = 73.5 N and length L = 2.55 m is supported by a cable at an angle of ? = 37.0°above the rod. The other end rests on a small frictionless support and presses into a wall as shown in the figure. Determine the magnitude n of the vertical normal force exerted by the support on the rod and find the magnitude T of the tension in the cable.

. A carpenter and his assistant are to carry a uniform wooden beam, which is 6 m long and weighs 100 kg, on their shoulders. Both men are of the same height so that the beam is carried horizontally. However, the carpenter is the stronger of the two and wishes to bear 50% more of the weight of the beam than his assistant. If one end of the beam is placed on the assistant's shoulder, how far from the other end of the beam should the carpenter put his shoulder? [71

As part of an engineering design, a load of mass M2=10 kg is to be suspended from the far end of a beam of mass M1=8kg. A horizontal cable supporting the beam attaches to the beam at a distance of d=2m from a joint/hinge. The length of the beam is L=7m. The beam makes an angle of 55 degrees with the horizontal. M, 2 a. What magnitude of force should the cable be able to withstand in this setup? b. What magnitude of force should the joint/hinge be able to withstand in this setup?

A taho vendor carries a 1.5 m long light plank over his shoulder. At the ends of the plank are two buckets weighing 40 N and 60 N respectively. (a) Find the value of force F exerted by his shoulder. Neglect the weight of the plank. ( b) Where should he support the plank for it to be balanced horizontally

Question 23 of 32 The bones of the forearm (radius and ulna) are hinged to the humerus at the elbow. The biceps muscle connects to the bones of the forearm about 2.15 cm beyond the joint. Biceps muscle Assume the forearm has a mass of 2.15 kg and a length of 0.405 m. When the humerus and the biceps are nearly vertical and the forearm is horizontal, if a person wishes to Humerus- hold an object of mass 4.95 kg so that her forearm remains motionless, what is the force exerted by the biceps muscle? Radius M Elbow- Ulna force: Hand about us privacy policy terms of use contact us help careers tv W MacBook Air 8628-1