(1)
Depreciation:
Depreciation refers to the reduction in the monetary value of a fixed asset due to its wear and tear or obsolescence. It is a method of distributing the cost of the fixed assets over its estimated useful life. The following is the formula to calculate the depreciation.
Partial period depreciation:
Partial period depreciation is calculated when acquisition and disposal occur at different times in a fiscal year, a company must determine the depreciation, depletion, and amortization to record for the part of the year that each asset actually is used.
To calculate: Depreciation expense on the building, machinery, and equipment for 2018.
(1)
Explanation of Solution
Company H uses
Straight line method:
Under the straight-line method of depreciation, the same amount of depreciation is allocated every year over the estimated useful life of an asset.
Sum-of- the-years’ digits (SYD) method:
Sum-of-the years’ digits method determines the depreciation expense by multiplying the depreciable base and declining fraction.
Where n is estimated life time of the asset.
Depreciation for 2018:
Depreciation on building and machinery:
Asset | Cost of the asset($) |
Residual value ($) |
Rate of depreciation (1) |
Annual depreciation ($) |
Building | 500,000 | 0 | 4% | 20,000 |
Machinery | 240,000 | 24,000 | 12.50% | 27,000 |
Table (1)
Depreciation on equipment is as follows
Building, machinery and equipment are used only for 9 months in 2018 that is April to December then the depreciation for 2018 is as follows
Depreciation on building is $15,000
Working notes:
(1) Calculate the rate of depreciation for building and machinery.
Rate of Depreciation for building
Rate of Depreciation for machinery
*Calculate SYD value
(2)
To prepare: The journal entries to record (1) depreciation on the machinery sold on June 29, 2019, and (2) the sale of machinery.
(2)
Explanation of Solution
(1) Prepare
Date | Account titles and explanation | Post Ref. |
Debit ($) |
Credit ($) |
June 29 2019 |
Depreciation expense (1) | 5,625 | ||
5,625 | ||||
(To record the depreciation entry) |
Table (2)
- Depreciation is an expense which decreases shareholders equity. Thus, it is debited.
- Accumulated depreciation is a contra asset which decreases assets value. Thus, it is credited.
(2) Prepare journal entry to record the sale of machinery.
Date | Account titles and explanation | Post Ref. |
Debit ($) |
Credit ($) |
June 29 2019 |
Cash | 80,000 | ||
Accumulated depreciation-machinery (2) | 14,063 | |||
Loss on sale of machinery (balancing figure) |
5,937 | |||
Machinery | 100,000 | |||
(To record the sale of machinery entry) |
Table (3)
- Cash is a current asset which is increased by sale of asset. Thus, it is debited.
- Accumulated depreciation is a contra asset which is increasing the value of the asset. Thus, it is debited.
- Loss on sale of the asset decreases shareholders equity. Thus, it is debited.
- Machinery is an asset. It is decreased because of sale of the machinery. Thus, it is credited.
Working notes:
(1) Calculate the depreciation expense on machinery.
In 2019, the machinery is used only for 6 months that is January to June then the depreciation for 2019 is as follows
(2) Calculate accumulated depreciation on the machinery sold.
The machinery used for 15 months that is April 2018 to June 2019. Then the accumulated depreciation is calculated as follows:
(3)
To calculate: The depreciation on building, machinery and equipment for 2019.
(3)
Explanation of Solution
Depreciation on building and machinery for 2019
Asset | Cost of the asset($) |
Residual value ($) |
Rate of depreciation (1) |
Annual depreciation ($) |
Building | 500,000 | 0 | 4% | 20,000 |
Machinery | 140,000 | 14,000 | 12.50% | 15,750 |
Table (4)
- Machinery was sold during 2019, $100,000. Remaining machinery value is $140,000 and the residual value on machinery is 10% on the book value.
- Depreciation on building for 2019 is $20,000.
Compute depreciation on equipment for 2019 using sum of the year’s digit method
For first 3 months:
For remaining 9 months:
Deprecation for 2019 is as follows:
Therefore depreciation on equipment for 2019 is $36,750.
In 2019, depreciation on building is $20,000; on machinery is $15,750 and on equipment is $36,750.
Want to see more full solutions like this?
Chapter 11 Solutions
INTERMEDIATE ACCOUNTING (LL) W/CONNECT
- On Jan 1, 2021, Worsham Manufacturing purchased a new machine with an acquisition value of $350,000. It has been determined that the machine has a residual value of $16,000 with an estimated useful life of 5 years. Assuming the company uses the straight-line method to depreciate this type of asset, what would the book value be at the end of Year 5? O66.800 O 16,000 00 350.000 Question 20 4 pts lyrarrow_forwardFIXED ASSET 5 PT ABC sold one of its old machines on June 30, 2020. The machine was purchased for $110,000 on January 1, 2016, and was depreciated on a straight-line basis for 10 years with $10,000 residual value. The machine was sold for $53,000. Instruction: Prepare entries of machine disposal including depreciation expense until time of sales.arrow_forwardProblem 1 Truss, Inc. purchased a new machine on January 1, 2021, at a cost of 700.000 The machine's estimated useful life at the time of the purchase was four years, and its residual value was 55.000. Instructions 1. Prepare a complete depreciation schedule, beginning with calendar year 2021, under each of the methods listed below: (a) Straight-line. (b) 200 percent declining-balance Assume that Truss, Inc. sells the machine on December 31, 2021, for 300.000 cash. Compute the resulting gain or loss from this sale under each of the depreciation methods.arrow_forward
- Question 3: Disposal of PPE On January 1, 2021, the Dayton Auto Parts Company acquired nine identical assembly robots for a total of $594,000 cash. The robots had an expected useful life of 10 years and an expected residual value of $54,000 in total. Dayton uses straight-line depreciation. 1. What is the journal entry for the acquisition? 2. What is the journal entry for the first annual depreciation charge? 3. On December 31, 2023, Dayton sold one of the robots for $42,000 in cash. The robot had an original cost of S$66,000 and an expected residual value of $6,000. Prepare the journal entry for the sale. 4. Refer to requirement 3. Suppose Dayton had sold the robot for $52,000 cash instead of $42,000. Prepare the journal entry for sale.arrow_forwardQuestion 15 In January of 1980 DTM purchased a building for $15,000,000 and at that time estimated that the building would have a useful life of 50 years and no residual value. DTM uses the straight line method to depreciate all of its assets. During 2020, the following expenditures were made: 1. On January 1st, 2020 the original siding was replaced with new siding. The old siding cost $1,000,000 and the new siding cost $2,500,000. The new siding is expected to have a useful life of 15 years. 2. On February 6th, 2020 there was $60,000 of uninsured damage to the building caused by severe weather that was repaired. This major repair did not change the estimated useful life of the building or its residual value. 3. The buildings old air filtration system was replaced with a new one on June 22nd, 2020. The new air filtration system cost $800,0000 and it is estimated that it will have a useful life of 10 years. The cost of the old air filtration system is unknown, but it is estimated to be…arrow_forwardSituation II During 2025, Larkspur Corporation constructed and manufactured certain assets and incurred the following interest costs in connection with those activities. Factory constructed for Larkspur's own use Inventories routinely manufactured, produced on a repetitive basis Special-order machine for sale to unrelated customer, produced according to customer's specifications Interest Costs Incurred The total amount of interest costs to be capitalized. $ $43,000 7,300 3,300 All of these assets required an extended period of time for completion. Assuming the effect of interest capitalization is material, what is the total amount of interest costs to be capitalized?arrow_forward
- Current Attempt in Progress X Your answer is incorrect. Metlock Company purchased equipment for $285,600 on October 1, 2025. It is estimated that the equipment will have a useful life of 8 years and a salvage value of $12,000. Estimated production is 48,000 units and estimated working hours are 19,000. During 2025, Metlock uses the equipment for 530 hours and the equipment produces 1,100 units. Compute depreciation expense under each of the following methods. Metlock is on a calendar-year basis ending December 31. (Round rate per hour and rate per unit to 2 decimal places, e.g. 5.35 and final answers to O decimal places, e.g. 45,892.) (a) (b) (c) Straight-line method for 2025 (e) Activity method (units of output) for 2025 Activity method (working hours) for 2025 (d) Sum-of-the-years'-digits method for 2027 Double-declining-balance method for 2026 $ ta tA LA 8531 5.69 7615 51187 66797arrow_forwardE10-20 Expenditures after Acquisition McClain Company incurred the following expenditures during 2019: Apr. 9 The air conditioning system in the old manufacturing facility was replaced for $83,000. The old air conditioning system had a cost of $74,000 and a book value of $2,000. The old air conditioning system had no scrap value. June 29 Annual maintenance of $38,000 was performed. Sept. 12 The roof of the old manufacturing facility is replaced at a cost of $65,000. This expenditure substantially extended the life of the facility. Dec. 28 A new wing was added to the manufacturing facility at a cost of $275,000. This expenditure substantially increased the productive capacity of the plant. Required: 1. Prepare journal entries to record McClain’s expenditures for 2019. 2. Next Level What is the effect on the financial statements if management had improperly accounted for the: a. addition of the new wing to the manufacturing facility b. annual maintenance expendituresarrow_forwardBrief Exercise 11-15 (Algo) Change in principle; change in depreciation method [LO11-6] At the beginning of 2022, Robotics Incorporated acquired a manufacturing facility for $131 million $10.1 million of the purchase price was allocated to the building. Depreciation for 2022 and 2023 was calculated using the straight-line method, a 20-year useful life, and a $2.1 million residual value. In 2024, the company switched to the double-declining-balance depreciation method What is depreciation on the building for 2024? Note: Do not round intermediate calculations. Enter your answer in whole dollars rounded to the nearest whole number. Depreciationarrow_forward
- Problem 4 The following information pertains to Bosh Inc.'s depreciable assets: • Machine Y cost P525,000 and was acquired on January 1, 2016. On the acquisition date, the expected useful life was 12 years with no residual value. The straight line method was used. On January 1, 2020, it was estimated that the remaining life of the asset would be 4 years and that there would be a P25,000 residual value. • A building was purchased on January 1, 2017 for P3,000,000. The building was expected to have a useful life of 20 years with no residual value. The straight line depreciation method was used. On January 1, 2020, a change was made to the sum-of-the-years'-digits method of depreciation. No change was made to the estimated useful life and residual value of the building. _3. What is the depreciation expense of Machine Y for 2020? _4. What is the depreciation expense of building for 2022?arrow_forwardQuestion1: ABC Ltd purchased a machine at a cost of $300,000 on 1 July 2020. It had a useful life of 10 years and after that residual value was estimated to be $60,000. The benefits from machine are expected to be spread evenly over its life. On 30 June 2022, fair value of machine was $230,000 and the salvage value and useful remaining life were the same as estimated at the time of its purchase. On 30 June 2022, the machine was sold for $130,000. What journal entries will be recorded right from beginning until the sale of machine as per AASB 116 in the following cases: a) If the revaluation was recorded. b) If the revaluation was not recorded. c) What will be the value of Impairment on 30 June 2022 if it was decided not to sell the machine.arrow_forwardComputing Partial Period Depreciation under Multiple Depreciation Methods To demonstrate the computations involved in several methods of depreciating a fixed asset, the following information is provided. Cost and residual value Estimated service life Acquisition cost $62,500 Years 5 Residual value $2,500 Service hours 50,000 Productive output (units) 120,000 d. Sum-of-the-years’-digits method: Compute the depreciation amount for each year. 2020 2021 2022 2023 2024 2025 Answer Answer Answer Answer Answer Answer e. Double-declining-balance method: Compute the depreciation amount for each year. 2020 2021 2022 2023 2024 2025 Answer Answer Answer Answer Answer Answer Required Compute the annual depreciation using each of the following methods assuming that the asset was purchased on August 1, 2020.arrow_forward
- Intermediate Accounting: Reporting And AnalysisAccountingISBN:9781337788281Author:James M. Wahlen, Jefferson P. Jones, Donald PagachPublisher:Cengage LearningCornerstones of Financial AccountingAccountingISBN:9781337690881Author:Jay Rich, Jeff JonesPublisher:Cengage LearningFinancial Accounting: The Impact on Decision Make...AccountingISBN:9781305654174Author:Gary A. Porter, Curtis L. NortonPublisher:Cengage Learning
- Individual Income TaxesAccountingISBN:9780357109731Author:HoffmanPublisher:CENGAGE LEARNING - CONSIGNMENT