When filled to capacity, the unpressurized storage tank shown contains water to a height of h= 20 ft. The outside diameter of the tank is 8 ft and the wall thickness is 0.625 in. Determine the maximum normal stress at the base of the tank. (Weight density of water = 62.4 lb/ft³) 479 psi O 657 psi O 899 psi 783 psi O 705 psi O O O O O h

When filled to capacity, the unpressurized storage tank shown contains water to a height of h= 20 ft. The outside diameter of the tank is 8 ft and the wall thickness is 0.625 in. Determine the maximum normal stress at the base of the tank. (Weight density of water = 62.4 lb/ft³) 479 psi O 657 psi O 899 psi 783 psi O 705 psi O O O O O h

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A cylindrical steel pressure vessel 400 mm in diameter with a wall thickness of 20 mm, is subjected to an internal pressure of 4.5 MPa. Calculate the tangential stress in the steel. A )30.50 MPa B )22.50 MPa )45.00 MPa D )12.00 MPa
A concrete dam has the profile shown in Figure If the density of concrete is 2400 kg/m³ and that of water is 1000 kg/m³, determine the maximum compressive if the depth of the water behind the dam is h = 15 m. stress at section m-n 3 m 1 25 m h 9 m
Answer with solution asap
A compound shaft consists of a titanium alloy [G = 6,200 ksi] tube (1) and a solid stainless steel [G = 11,500 ksi] shaft (2). Tube (1) has a length of L1 = 36 in., an outside diameter of D1 = 2.55 in., and a wall thickness of t1 = 0.160 in. Shaft (2) has a length of L2 = 62 in. and a diameter of d2 = 1.25 in. If an external torque of TB = 660 lb·ft acts at pulley B in the direction shown, calculate the torque TC required at pulley C so that the rotation angle of pulley C relative to A is zero.
A compound shaft consists of a titanium alloy [G = 6,200 ksi] tube (1) and a solid stainless steel [G= 11,500 ksi] shaft (2). Tube (1) has a length of L₁ = 42 in., an outside diameter of D₁ = 2.25 in., and a wall thickness of t₁ = 0.145 in. Shaft (2) has a length of L₂ = 52 in. and a diameter of d₂ = 1.45 in. If an external torque of Tg = 640 lb-ft acts at pulley B in the direction shown, calculate the torque Tc required at pulley C so that the rotation angle of pulley C relative to A is zero. X Answer: Tc= B TB Tc (2) (1) L2 L₁ lb-ft+ N
please answer all thank youu..
L1 = 2m L2 = 3m
Problem As shown in Fig. P-241, three steel wires, each 0.05 in.2 in area, are used to lift a load W = 1500 lb. Their unstressed lengths are 74.98 ft, 74.99 ft, and 75.00 ft. (a) What stress exists in the longest wire? (b) Determine the stress in the shortest wire if W = 500 lb. W Figure P-241
Problem 1: Load P 24 kips compressing the concrete cylinder which length is reduced from 12 inches to 11.9970 inches after compression. The diameter increased from 6 inches to 6.003 in. Determine the value of the modulus elasticity E. = 12 in. de = 6 in -
A compound shaft consists of a titanium alloy [G = 6,200 ksi] tube (1) and a solid stainless steel [G = 11,500 ksi] shaft (2). Tube (1) has a length of L1 = 40 in., an outside diameter of D1 = 2.05 in., and a wall thickness of t1 = 0.120 in. Shaft (2) has a length of L2 = 54 in. and a diameter of d2 = 1.05 in. If an external torque of TB = 580 lb·ft acts at pulley B in the direction shown, calculate the torque TC required at pulley C so that the rotation angle of pulley C relative to A is zero.
A closed cylindrical tank containing a pressurized fluid has an outside diameter of 448 mm and a wall thickness of 11 mm. The tank is pressurized to 2.53 MPa. Determine the hoop stress in the wall of the tank. Round off the final answer to five decimal places.
ASAP NEED RIGHT COMPLETE SOLUTION !!!