Use the mesh-current method to find the branch currents ia, ib, and ic in the circuit shown in figure. And find currents ia, ib, and ic if the polarity of the 68 V source isreversed. The values of v1 and v2 are 68 V and 23 V, respectively.Find the value of aU1ka= 36.00AOùa = 6.08AOia=908AOia=2.08A40wi10wwή ξ10 Ω202www30w

In the given questions we need to calculate the current ia by mesh analysis.

Use the mesh-current method to find the branch currents ia, ib, and ic in the circuit shown in figure. And find currents ia, ib, and ic if the polarity of the 66 V source is reversed. The values of v1 and v2 are 68 V and 23 V, respectively Find the value of ia

Use the mesh-current method to find the branch currents ia, ib, and ic in the circuit shown in figure. And find currents ia, ib, and ic if the polarity of the 66 V source is reversed. The values of v1 and v2 are 68 V and 23 V, respectively Find the value of ia

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter7: Parallel Circuits

Section: Chapter Questions

Problem 3PP: Using the rules for parallel circuits and Ohmslaw, solve for the missing values....

See similar textbooks

Related questions

Q: For the circuit shown in the figure below, R,- 50 2, R₂ =20 02, R3 =35 2, R=1092, Rs 68 2, 1,-0.111…

Q: b) A feedback control system is proposed with characteristic equation shows at below. Sketch the…

A: Given Data:A loop transfer function of,To Find:Root locus plot and stability of the feedback control…

Q: 3. A short 3-phase transmission line delivers 1000 KVA at 10kV, 0.8 power JS factor lagging to a…

A: Since multiple unlinked questions have been asked, as per Bartleby guidelines only the first one has…

Q: 3. From the following circuit determine the currents and voltages of each branch. R1 www 1k 01 Si

A: In the given questions we need to calculate the voltage and current across each element.

Q: 5) A network given in figure is configured by using a potentiometer. Determine the maximum and…

Q: Chapter 15 12. Calculate the total impedance of the circuits in Fig. 15.89. Express your answer in…

Q: Using Mesh analysis, find i3 in Amperes if Is = 2.58 A and R = 4.9 Ohms. Give answer in 3 decimal…

Q: 4. Determine the ABCD parameters if losses are neglected. 5. Find the equivalent pi diagram for the…

A: Line length (L): 350 kmSeries impedance (z): 0.0195 + j0.35 Ω/kmShunt admittance (y): j4.5…

Q: Solve the linear transformer circuit: 1. Applying its equivalent in T and in π. 2. Determining the…

Q: 30 nH 400 nH 300 nH 50 nH 50 nH 30 nH 90 nH 300 nH

A: for the given series - parallel combination of inductor it is asked to find the equivalent…

Q: Compute for Ic, Ib, Ie, Vce, and if the circuit is an amplifier or not.

Q: 2. Discuss the following circuits by directly stating their circuit diagrams, waveforms, principle…

A: We need to discuss the Waveform generator circuit by directly stating their circuit diagrams,…

Q: 2) a) Scale the transistor sizes in the below figure to decrease the gate power by a factor of 8. b)…

A: The given circuit is shown below.We need to determine the scale the transistor sizes in the above…

Q: For the High-Pass R-C Filter presented in Figure determine the decibel level at Bode diagram in…

A: High-pass R-C filter,R = 0.9 k ohms C = 0.04 μF f = 950 Hz Find :-The decibel level =?

Q: Two identical single-phase transformers connected in open delta will serve a 3-phase motor load of…

Q: 12 V 4 Ω 1 0 5Η 100) of {5Ω ЗА

A: The circuit diagram,

Q: A three-phase 50-Hz lossless transmission line is 300 km long. The series impedance and the shunt…

A: For a 3-phase, 50-Hz lossless long transmission line, the following parameters are given:line length…

Q: What is transformer?

A: Transformer :-A transformer is the most basic device used to transmit electrical energy from one…

Q: 2. find (a) the current in each resistor, (b) the voltage across each resistor in the Circuit below.…

A: The branches connected in parallel will having same voltage which is appliedBranches connected in…

Q: 1. The sinusoidal voltage source vg in the circuit is 100 cos400 V. a) Construct the…

A: The circuit diagram,The source voltage,

Q: Calculate the current through each resistor in (Figure 1) if each resistance R=4.75 kn and V = 12.0…

Q: • Use graphical convolution to show that 0 x(t) g(1) 0 0

Q: A single phase transformer has a 600 turns in the pri- mary and 1200 turns in the secondary. The…

A: It is given that:

Q: A prototype active filter (R = 122, C = 1 F, wc = 1 rad/s) has a gain of -160 dB at @ = 0.01 rad/s…

A: Given data:

Q: Q6. (Optional) For the circuit shown in Figure, determine the Thévenin equivalent circuit by…

A: Given Data:A DC resistive circuit with,Battery Voltage To Find:Thevenin's equivalent circuit Short…

Q: Determine current I for the given circuit uisng mesh analysis 06-2023 4 12 24 V 1022 10 2 4Ω www www…

Q: (C3, COI, POI) (b) Solve the convolution of continuous signal x(1) and continuous system h(t) shown…

A: Given Data:The continuous-time signals of,InputSystem To Find:The convolution of the signals

Q: Due to the nature of this problem, do not use rounded intermediate values in your…

A: Given: A circuit diagram,To find:The currents flowing through the circuit.

Q: Consider a series RC circuit as in the figure below for which R= 2.70 MQ, C = 3.00 μF, and = 26.0 V.…

A: Consider a series RC circuit as in the figure below for which Here, the given circuit diagram is,a)…

Q: if this is an rl circuit, how do we find the current in the inductor? or how do we analyze this…

A: The circuit diagram,

Q: C₁=5 μF i. ii. iii. iv. C₂=4 μF HH 220V C₁-6μF Define electric dipole. Deduce Coulomb's law from…

A: Given Data:A series and parallel configuration of the capacitors with,Supply voltage To…

Q: 5. Calculate the current i(t) for the following circuit: R₁ = 10 92; C₁ = 10 µF; C₂ = 10 µF: L₁ = 1…

A: We need to calculate iA(t),

Q: The response of a Butterworth filter is required to fulfill the following specifications: f_{p} =…

A: "Since you have posted a question with multiple sub parts, we will provide the solution only to the…

Q: (C4, CO3, PO2) (b) The current flowing in a network is given by I(s) diagram and hence compute the…

Q: Draw a half-adder logic circuit using only two gates

A: It is given that:Half Adder

Q: 11. The direction of the magnetically induced current will be (parallel, perpendicular, opposite) to…

A: 11. The concept is based on Lenz's law.12. The concept used here is production of A.C current under…

Q: Design BCD decimal adder (with error detection and correction circuit) Circuit + truth table with…

A: To design a BCD (Binary Coded Decimal) adder with error detection and correction, we can use…

Q: An RL serie circuit is connected to a 240 volt,60 Hz line. The inductor has a current of 8 amperes…

A: In this questionWe need to determine the current in the resistance R. If RL series circuit is…

Q: لا + 1 x جے کے ہونے کی or xok ل و م - و

A: Given Data:A block diagram model of a system having,Reference input Controlled output = To Find:The…

Q: If the voltage sources in the circuit shown are converted to current sources and then combined, what…

Q: A 350 km transmission line has the following parameters: - z = 0.0195 +j0.35 Ω/km - y = j4.5 μS/km…

A: To determine the Characteristic Impedance of the transmission line (CIS) and the maximum power…

Q: 2. For the following H(z), H(z) = 1-z-1 1-52-¹ +62-² (a) Get the partial fraction form and its…

A: Written the given data for option a, b, C

Q: For the ideal transformer circuit of figure shown below, find (a) 1₁ and 12: (b) V₁, V2 and Va the…

Q: Determine the value of vx as labeled in the following circuit. V1 = 2.3 V, R1 = 2.7 02, R2 = 9.5 02,…

Q: Implement JK Flip flop using nand gate. Answer should consist of Truth table and logic circuit other…

Q: Find the Z-transform of x[k] = (-)" k = 1,4,7,10 .... ***

A: According to the question, for the given function We need to find Z-transform.

Q: Q. 4 Determine whether the following signal is energy-type or power-type. x(n) {5, 3, 3,-1, 3, 2,…

Q: Apply the convolution property of z-transform on given signals. x[n]=()u[n] and y[n]=u[n] b. Solve…

A: a) X[n]=(1/3)nu[n] and y[n]=1/5u[n]We need to calculate Z transform of this signal.b)…

Q: Calculate the current through each resistor in (Figure 1) if each resistance R=4.75 kn and V = 12.0…

A: In this questionWe need to determine the current in the each resistances. We are solving this…

Q: Q2) Find the estimate values of the magnitude and phase of the transfer function H(w) = (1+1,06)…

A: Given:A transfer function, To find:The values of magnitude and phase at .

Concept explainers

Current Division Method

The generalized current divider formula is given by the following relation below,

Question

Use the mesh-current method to find the branch currents ia, ib, and ic in the circuit shown in figure. And find currents ia, ib, and ic if the polarity of the 68 V source is
reversed. The values of v1 and v2 are 68 V and 23 V, respectively.
Find the value of a
U1
ka= 36.00A
Oùa = 6.08A
Oia=908A
Oia=2.08A
40
w
i
10
ww
ή ξ10 Ω
202
www
30
w

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Requirement

VIEW

Step 2: Case 1. By assuming the same polarity as given in questions

VIEW

Step 3: Case 2 by reverse the polarity of the 66 V battery

VIEW

Solution

VIEW

Step by step

Solved in 4 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Given the circuit below and that R1=1.7ohm,R2=3.5ohm,Emf1=2.1V and Emf2=6.3V. What is the current through the section ac?
What is the difference between the cut-off voltage VGS0 f and the narrowing voltage Vp? Explain this with the diagram
Using NODAL VOLTAGE ANALYSIS, solve Vy and Vx and voltages across EACH RESISTOR. Put signs on each resistors in the figure and draw the flow of current
Determine the total voltage, VT and the resistance, R3 in the circuit shown in Figureif the voltage across R1 is 4v and the current through R4 is 1.5 A.
the adjoining figure. This lamp can withstand a maximum voltage 3.0 v 0.4 9. Volt-ampere (V-I) charaeteristics of an incandescent lamp 16thd in and a maximum current 0.4 A. An infinite ladder network consisting a large number of these lamps is also shown in the figure given belo How much maximum voltage can be applied between the terminals A and B, so that no lamp gets damaged? (Use V5 = 2.2). Ans:x4.2V Hint: Curentin all bulls except first is
I am very confused with this problem, I know that I have to reduce the circuit, and we will end up with 2 resistor 1 in each side and the current in the middle, I know that I have to use current division, how do I know according to this problem which Z1 and Z2 will be. The io is on the right side.. The io will be the same in the left and right side... I need steps for this problem please
Two batteries are connected in parallel delivering power to a power resistor. The first battery has an open circuit voltage of 12.6 V and an internal resistance of 0.2 ohm. The second battery has an open circuit voltage of 12.2 V and an internal resistance of 0.3 ohm. Find the maximum power delivered to the load resistance.
Consider the series-parallel circuit shown in the figure below with various multimeters connected in the circuit. Assum that XMM1 has been configured in ammeter mode, and XMM2 has been configured in voltmeter mode. XMM1 R1 1kQ XMM2 R2 R3 V1 1kQ 1kQ 12V 3.1: Redraw the circuit replacing XMM1 and XMM2 by their equivalent circuit models 3.2: Assume that XMM2 was incorrectly configured in ammeter mode. Redraw the equivalent circuit from 3.1 and compute the current that would be measured by the ammeter in this scenario. Hil-
A component requires 6.3-V across it with a current of 0.3 V. A second component requires 12.6-V at 0.15A. The two components are connected in series. What is the value of resistor that must be connected across the 12.6-V component to allow it to operate properly when in series with the 6.3-V component?
Determine E and P3. Given R1 = 10ohms, R2 = 20ohms, R3 = 60 ohms, R4= 10ohms, R5= 20ohms, R6= 60ohms, R7= 10 ohms, R8= 20 ohms. R9= 30ohms, P6 = 540W.
A dc generator and a battery are connected to a resistive load RL in the figure below. For each, determine the value of RL for maximum power transfer to RL. Next is to determine RL to 75% efficiency
Shown in the figure below is an electrical circuit containing three resistors and two batteries. I₁ 0= 4 + L . ww R3 R₂ ww 1₂ R₁ ww Write down the Kirchhoff Junction equation and solve it for I, in terms of I₂ and I3. Write the result here: 1₁ = 12-13 R₂=552 R₂ = 132 13 Write down the Kirchhoff Loop equation for a loop that starts at the lower left corner and follows the perimeter of the circuit diagram clockwise. - IzR3 − LR₁ + 14 + 10 Write down the Kirchhoff Loop equation for a loop that starts at the lower left corner and touches the components 4V, R₂, and R₁. 0 = 4-1₂R₂-11R₁ The resistors in the circuit have the following values: R₁ = 12 Solve for all the following (some answers may be negative): I₁ = 27.78 X Amperes 1₂ = 28.84 X Amperes 13 = 1.060 X Amperes NOTE: For the equations, put in resistances and currents SYMBOLICALLY using variables like R₁,R₂,R3 and 11,12,13. Use numerical values of 10 and 4 for the voltages.