Thyristors are ideal in the circuit in Figure 2. The internal resistances of the sources are neglected, but each has Lk=6 mH ,series leakage inductance is taken into account. At 50Hz, Vˆ= 250V , with an ignition angle of α = 90º and full voltage Id= 8A It is studied with filtered current ( Ly=oo ). a) Find the transmission angle (ü) and transmission time. b) Find the average voltage on the load without neglecting the transfer. The formulas for this circuit and this study are in Annex-1: c)Draw the y v waveform, showing the transmission notches.
Short Transmission Line
A short transmission line is a transmission line that has a length less than 80 kilometers, an operating voltage level of less than 20 kV, and zero capacitance effect.
Power Flow Analysis
Power flow analysis is a topic in power engineering. It is the flow of electric power in a system. The power flow analysis is preliminary used for the various components of Alternating Current (AC) power, such as the voltage, current, real power, reactive power, and voltage angles under given load conditions and is often known as a load flow study or load flow analysis.
Complex Form
A power system is defined as the connection or network of the various components that convert the non-electrical energy into the electric form and supply the electric form of energy from the source to the load. The power system is an important parameter in power engineering and the electrical engineering profession. The powers in the power system are primarily categorized into two types- active power and reactive power.
Thyristors are ideal in the circuit in Figure 2. The internal resistances of the sources are neglected, but
each has Lk=6 mH ,series leakage inductance is taken into account.
At 50Hz, Vˆ= 250V , with an ignition angle of α = 90º and full voltage Id= 8A
It is studied with filtered current ( Ly=oo ).
a) Find the transmission angle (ü) and transmission time.
b) Find the average voltage on the load without neglecting the transfer.
The formulas for this circuit and this study are in Annex-1:
c)Draw the y v waveform, showing the transmission notches.
Step by step
Solved in 4 steps with 15 images
