Three reservoirs are connected respectively with pipes 1, 2 and 3 joining at a common junction P. Reservoir B is at elevation 300 m and reservoir C is at elevation 277 m. Pipe 1 is 800 mm in diameter and 800 m long, pipe 2 is 600 mm in diameter and 500 m long and pipe 3 is 400 mm in diameter, 800 m long. Reservoir A supplies 560 liters per second to reservoirs B and c. What is the flow in pipe 2? Neglect minor losses and assume f=0.25 for all pipes. Select one: O a. 179 liters per second O b. 354 liters per second O . 132 liters per second O d. 231 liters per second

Three reservoirs are connected respectively with pipes 1, 2 and 3 joining at a common junction P. Reservoir B is at elevation 300 m and reservoir C is at elevation 277 m. Pipe 1 is 800 mm in diameter and 800 m long, pipe 2 is 600 mm in diameter and 500 m long and pipe 3 is 400 mm in diameter, 800 m long. Reservoir A supplies 560 liters per second to reservoirs B and c. What is the flow in pipe 2? Neglect minor losses and assume f=0.25 for all pipes. Select one: O a. 179 liters per second O b. 354 liters per second O . 132 liters per second O d. 231 liters per second

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The three reservoirs, A, B and C are connected by pipelines A, B and C respectively which meets at the junction X. The elevation of reservoir A is equal to 300 m while that of B is 285 m. The discharge flowing out of reservoir A is 1.4 cu.m/sec. (Pipes, Diameter, Length, Friction factor "f")A, 800 mm, 1500 m, 0.0157B, 600 mm, 450 m, 0.0162C, 450 mm, 1200 m, 0.0177 (a) Compute the rate of flow in reservoir B in cu.m/sec. (b) Compute the rate of flow in reservoir C in cu.m/sec. (c) Compute the elevation of Reservoir C in meters.
h₂ h2-h1 h₂ Q b=h Unconfined aquifer Ⓒ Steady flow h1 = 80ft h2 = 100ft r1 - 800 ft r2 = 1000 [L Pumping rate = 300 gpm Estimate hydraulic conductivity of the aquifer 1 gpm = 192.5 ft3/day
The reservoir's water flow traverses a 15-meter-long spillway, lowering the water's height from 83 meters to 81.5 meters, with the crest elevation at 80 meters, in 30 minutes. Apply C = 1.84. A) What is the reservoir's area?B) How long does it take to extract water from an elevation of 83 m/80.2 m? C) After 20 minutes, what is the water's ultimate elevation?
Question 7 (Parallel pipes) Two reservoirs are connected by two parallel pipelines with diameters of 0.8m and 0.6m as shown in Figure 8. The pipelines are both 3 km long with a value of 0.03. The combine discharge through the pipelines must be at least. Pipe 2 Pipe 1 Figure 8 a) When the total discharge is, what is the flow rate in the individual pipeline? b) What is the minimum difference in the elevation of the surface water level in the two reservoirs required to maintain a flow of through the pipelines?
01(a) There are two reservoirs, A and B, with the water surface elevation in A 10 m higher than that in B. These are connected through two pipes in series with pipe 1 starting from A and pipe 2 ending in B. Lengths of both the pipes are 100 m, diameter of pipe 1 is 30 cm and diameter of pipe 2 is 25 cm. At the junction of these pipes, water is being withdrawn at the L v² D 2g rate of 0.02 m³/s. Friction loss in the pipes is given by h = f and the Darcy friction, f, entrance and at the junction, for both pipes is 0.02. Neglecting the head losses at the estimate the total water withdrawal from reservoir A.
please answer the problem asap, ty
Three reservoirs A, B and C at water levels of 25 m, 12 m and 8 m are connected by a pipe network. 1200 m length pipe of diameter 0.5 m and f = 0.013 draws water from A. 1000 m length pipe of diameter 0.4 m and f = 0.015 draws water from B and joins the pipe end from A. The reservoir C is connected to this junction by 900 m length of pipe 0.6 m diameter with f = 0.011 What would be the direction of flow? * Reservoir A feeds reservoirs B and C. Reservoir B and C feed reservoir A. Reservoir A and B feed reservoir C. Reservoir C feeds reservoirs A and B. If the flow in the 900m pipe is 0.60 m^3/s, what would be the flow in the 1000m pipe? 0.064 0.042 1 0.129 0.091 Back Next Clear form
Three reservoirs are connected respectively with pipes 1, 2 and 3 joining at a common junction P. Reservoir B is at elevation 300 m and reservoir C is at elevation 277 m. Pipe 1 is 800 mm in diameter and 800 m long, pipe 2 is 600 mm in diameter and 500 m long and pipe 3 is 400 mm in diameter, 800 m long. Reservoir A supplies 560 liters per second to reservoirs B and C. Neglect minor losses and assume f=0.25 for all pipes. What is the flow in pipe 3? Select one: O a. 329 liters per second O b. 428 liters per second O c. 381 liters per second O d. 206 liters per second
Three reservoir, named A,B, and C are connected by Pipe 1, Pipe 2, and Pipe 3 respectively joining at a common junction. Determine the into or out of the reservoir A in the pipe system, given the following data. Use n=0.011 for all pipes. Reservoir A at El. 30 m, B at El. 24 m, and C at El. 15 m Pipe 1: 30 cm dia. 1200 m long Pipe 2: 20 cm dia. 900 m long Pipe 3: 16 cm dia. 1500 m long
Three reservoirs A, B, and C are connected by pipeline 1, 2 and 3 respectively which merges at a junction X. The elevation of reservoir A is 350 m and that of B is 290m. The rate of flow from A is 1.5 m^3/s. (See the table) 1. Compute the rate of flow in reservoirs B and C. Pipes Diameter Length Friction factor “f” 1 825 mm 1500 m 0.0155 2 650 mm 450 m 0.0165 3 450 mm 1200 m 0.0175
The three reservoir A, B and C are connected by pipelines A, B and C respectively. The elevation of reservoir A is equal to 200 m while that of C is 178 m. The discharge flowing towards reservoir B is 0.60 cum/sec. Reservoir B is higher than that of C. PIpeline A: 800 mm diam., 1500 m long, f = 0.0158; PIpeline B: 600 mm diam., 450 m long, f = 0.0168; PIpeline C: 450 mm diam., 1200 m long, f = 0.0175 Compute the rate of flow out of Reservoir A in cum/sec. Use 4-decimal places. Compute the rate of flow towards Rservoir C in cum/sec. Use 4-decimal places. Compute the elevation of Reservoir B in m. Use 2-decimal places
A new 45 cm CI pipe, 600 m long carries 260 L/s of water from an upper reservoir A, and flows into two new cast-iron pipes each 500 m long connected to two lower reservoirs. One pipe is 30 cm in diameter that leads to reservoir B, with water surface 5.0 lpwer than that in A. If the water surface in the third reservoir C is 2.0 m lpwer than that in B, what is the size of the pipe leading to C. Use Manning's n= 0.011.Neglect minor losses.