Group work Example Two reservoirs with a difference in water levels of 180 m and are connected by a 64 km long pipe of 600 mm diameter and f of 0.015. Determine the discharge through the pipe. In order to increase this discharge by 50%, another pipe of the same diameter is to be laid from the lower reservoir for part of the length and connected to the first pipe (see figure below). Determine the length of additional pipe required. 1 =180m QNI

Group work Example Two reservoirs with a difference in water levels of 180 m and are connected by a 64 km long pipe of 600 mm diameter and f of 0.015. Determine the discharge through the pipe. In order to increase this discharge by 50%, another pipe of the same diameter is to be laid from the lower reservoir for part of the length and connected to the first pipe (see figure below). Determine the length of additional pipe required. 1 =180m QNI

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Question 7 (Parallel pipes) Two reservoirs are connected by two parallel pipelines with diameters of 0.8m and 0.6m as shown in Figure 8. The pipelines are both 3 km long with a value of 0.03. The combine discharge through the pipelines must be at least. Pipe 2 Pipe 1 Figure 8 a) When the total discharge is, what is the flow rate in the individual pipeline? b) What is the minimum difference in the elevation of the surface water level in the two reservoirs required to maintain a flow of through the pipelines?
5 (c)
pls do not round off the decimal. only in the final answer
Three reservoirs are connected respectively with pipes 1, 2 and 3 joining at a common junction P. Reservoir B is at elevation 300 m and reservoir C is at elevation 277 m. Pipe 1 is 800 mm in diameter and 800 m long, pipe 2 is 600 mm in diameter and 500 m long and pipe 3 is 400 mm in diameter, 800 m long. Reservoir A supplies 560 liters per second to reservoirs B and C. What is the flow in pipe 2? Neglect minor losses and assume f=0.25 for all pipes. Select one: O a. 179 liters per second O b. 354 liters per second O . 132 liters per second O d. 231 liters per second
Please solve it using the equation given
Three reservoirs are connected respectively with pipes 1, 2 and 3 joining at a common junction P. Reservoir B is at elevation 300 m and reservoir C is at elevation 277 m. Pipe 1 is 800 mm in diameter and 800 m long, pipe 2 is 600 mm in diameter and 500 m long and pipe 3 is 400 mm in diameter, 800 m long. Reservoir A supplies 560 liters per second to reservoirs B and C. Neglect minor losses and assume f=0.25 for all pipes. What is the flow in pipe 3? Select one: O a. 329 liters per second O b. 428 liters per second O c. 381 liters per second O d. 206 liters per second
A 250 mm cast iron pipe 600 m long carries a discharge of 250 liters/sec. between the two reservoirs A and B with A higher than B. If the flow rate is doubled by replacing the existing pipeline of the same diameter, what length of pipe should be used? Assume f = 0.02.
Solve this question, please and find the permeability of the dam
solve
8