The oil (cp= 1759 J/kg.℃) from an oil cooled electric transformer is cooled from 79.5℃ to 29.4℃ at the rate of 1360.5kg per hour. This is done in an oil-water heat exchanger that receives 2948kg/hr of water at 15.6℃. For the heat exchanger U=295 W/m2℃. Find the exit temperature of water.answer: 25.294 degrees C J58. The oil (cp=1759kg.°Ci from an oil cooled electric transformer is cooledfrom 79.5°C to 29.4°C at the rate of 1360.5kg per hour. This is done in aoil-water heat exchanger that receives 2948kg/hr of water at l5.8C. For theheat exchanger U=295w/m²°C. Find the exit temperature of water.Ans: 25.294 °C

Answered: Image /qna-images/answer/bfcafef0-f5f9-4a1c-888b-ddb7e867047a.jpg

The oil (cp= 1759 J/kg.℃) from an oil cooled electric transformer is cooled from 79.5℃ to 29.4℃ at the rate of 1360.5kg per hour. This is done in an oil-water heat exchanger that receives 2948kg/hr of water at 15.6℃. For the heat exchanger U=295 W/m2℃. Find the exit temperature of water. answer: 25.294 degrees C

The oil (cp= 1759 J/kg.℃) from an oil cooled electric transformer is cooled from 79.5℃ to 29.4℃ at the rate of 1360.5kg per hour. This is done in an oil-water heat exchanger that receives 2948kg/hr of water at 15.6℃. For the heat exchanger U=295 W/m2℃. Find the exit temperature of water. answer: 25.294 degrees C

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter10: Heat Exchangers

Section: Chapter Questions

Problem 10.17P

See similar textbooks

Similar questions

A heat exchanger, shown below, is used to cool an air flow from 550 K to 250 K, both states at 1 MPa. The coolant is a water flow at 30 °C, 0.1 MPa. If the water leaves as saturated vapor, 0.1 MPa. 1 air 3 water
A (1.5 kg/s) of water vapor inters a condenser at (20 kPa and 60°C), and exit with (h= 251.5 kJ/kg). Find: a) The mass flow rate of water flow at the exit sections b) The rate of heat removed from the water in the condenser From table T=90C & P=70 kPah=2660 kJ/kg
The evaporator (a heat exchanger) in an A/C unit has R-410A entering at -20 °C and a quality of 30% and leaves at the same temperature and a quality of 100%. The COP of the air conditioner is known to be 1.3 and the mass flow rate is given as 0.013 kg/s. Find the power input to the cycle. (Note that, here, the evaporator is the part of the A/C unit that accepts [i.e., withdraws] heat from the room maintained at a cold temperature)
* İl. Gmail ► Untitled docu.. A system consists of a turbine and heat exchanger are connected in series. The working fluid is entering the turbine at P1 0.6 Mpa, T= 200 °C and leaving it with P,= 0.2Mpa. Then the turbine exit becomes the heat exchanger inlet to increase the fluid temperature to become 800 °C. Considering that the adiabatic power y =1.4 and the specific heat = 1.005 KJ/Kg.K. Determine the turbine production work WT and heat exchanger energy needed to be added quE. T = 200 °C P,= 0.6 Mpa- T T2 ? P,=0.2 Mpa h high НЕ T= 800 °C P3 =? 9 in
An ammonia simple vapor operates between evaporator and condenser temperature of -20°C and 35°C respectively. The system used producing 5000kg of ice in 20hrs. A 100x200mm compressor with a compression efficiency of 80% and electric input to the motor driving the compressor is 14kW. Motor efficiency is 90%. Determine: (a) Qe (b) Work indicated (c) Brake work (d) Mechanical efficiency
Water is used in a heat exchanger to cool 5 kg/s of air from 400 to 200 C. Calculate the minimum mass flow rate of the water if Twater =10 C.
Question 5Through combustion of a fossil fuel at 35000R, an engine receives energy at a rate of 3000Btu/s to heat steam to 15000R. There is no energy loss in the combustion process. The steam in turn, produces 1000Btu/s of work and rejects the remaining energy to the surroundings at 5000R (a) Calculate the plant irreversibility A cooling water pump is operating at a speed of 1800rpm. Its flow rate is 1800L/minute at a head of 14.4metres. The power of the pump is 45kW and 54kW respectively.(b) Determine the pump flow rate. Hydroelectric power is generated at a dam that produces a head of 54m and reservoir containing 11355m3 of water. (c) How much energy can be generated from the reservoir by a turbine-generator system whose efficiency is 20%? Assume g= 10ms-2
A steam condenser receives 10 kg per second of steam with an enthalpy of 2570 KJ/kg. Steam condenses into liquid and leaves with an enthalpy of 160 KJ/kg, if cooling water passes through the condenser with temperature increases from 13oC to 24oC. Calculate the cooling water flow rate in kg/sec. pls dont skip anything show all solution including conversion of units
ROOM (2) 700kPa х-0 CONDENSER (1) 40°C 700kPa EXPANSION VALVE (3) 100kPa EVAPORATOR (4) 100kPa x-1 OUTSIDE Consider a heat pump cycle operating with R134-a fluid at 0.01kg/s mass flow rate. Conditions are given in the figure. a) What are the values of heat supply rate to the room and heat absorption rate from the outside? b) What is COP of this heat pump? c) Assume we immediately put a watermelon of 8kg to the room at 2°C. Assuming a specific heat of 4200J/kg for the watermelon, how long will it take for the watermelon to reach room temperature of 20°C if we assume that heat pump only heats watermelon? COMP.
7. Air to H20 heat exchanger: Air enters a heat exchanger at (2000 F, 15 psia) and exits at (500 F, 15 psia). Saturated liquid H20 enters the heat exchanger at 300 F. The H20 is heated at a constant pressure and exits as a saturated vapor. The outer shell of the heat exchangers is insulated. The flow rate of the H20 is 100,000 Ibm/hr. Deterimine a. The volumetric flow rate of the air at the inlet (cfm) b. The rate of entropy generation within the heat exchanger (Btu/R/s)
The enthalpy entering the turbine of a geothermal power plant is 2750 KJ/kg and ,ass rate of 1 Kg/sec. The turbine brake power is 1000 KW condenser outlet has enthalpy of 210 KJ/kg. If temperature rise of cooling water in condenser is 8, what is the mass of cooling water requirement?
An air cooled refrigerant condenser (similar to the ones used for home air conditioners) is shown, The system condenses 0.1 kg/sec of 60 C R134A refrigerant. Air temperature rises by 5 C passing over the coils. Calculate the mass flow rate of air pushed through the condenser.