The mass of a piece of ice is 0.630 kg, density of water = 1.00 x 103 kg/m³, and density of ice = 917 kg/m³. Required information What is the buoyant force on the ice floating freely in liquid water? Enter a positive answer if the buoyant force is upward and a negative answer if the buoyant force is downward. N

The mass of a piece of ice is 0.630 kg, density of water = 1.00 x 103 kg/m³, and density of ice = 917 kg/m³. Required information What is the buoyant force on the ice floating freely in liquid water? Enter a positive answer if the buoyant force is upward and a negative answer if the buoyant force is downward. N

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

I need the answer as soon as possible
2. A 15 mm diameter jet of water impinges normally at the centre of rectangular plate of size 100 mm x 100 mm x 4 mm with a velocity of 5 m/s. The top edge of the plate is hinged. Determine the force required to apply at the bottom edge to keep the plate vertical. What would be the angle by which the plate is deflected in the absence of resisting force? The density of plate material is 7850 kg/m.
Problem The maximum stress produced by a pull in a bar of length 1 m is 150 N/mm2. The area of cross-sections and length are shown in Fig. 4.3. Calculate the strain energy stored in the bar if E = 2 x 105 N/mm2. 200 mm 100 mm 200 mm A C D 475 mm 50 mm 475 mm
The modulus of elasticity of the cantilever beam shown in the figure = 210.000 MPa and the length L = 5 m. Since q = 10 kN/m and 1=1,5x10-6 mm* end B collapses and calculate the rotation. 9 1 B L
Question 3 A beaker of water has a radius R = 0.06m and a contact angle 0 = 3.6 degrees. Calculate the surface tension force around the interface of the water with the perimeter of the beaker. Determine the horizontal and vertical components of the force.
1. For the system shown, the masses of A and B are 55 kg and 135 kg, respectively. The 20° coefficient of static friction between block A B and the surface C is 0.12 and the coefficient of static friction between blocks B A and B is 0.10. The coefficient of friction between the rope and the pulley is 0.10. What is the maximum mass M that can be M suspended as shown and still maintain equilibrium?
A trapezoidal plate shown in the figure is submerged in water is 2.4 m below the surface. The bases of the plate is 3 m and 6 m, respectively. The height is 11 m. Find the hydrostatic force acting on the plate in Newton. Unit weight of water is 9.75 KN/m³. Answer is in KN. Write only the value of your answer. FES b ^
SITUATION F. A block weighs 460 N in air and has a dimension of h = 0.5 m, w = 0.3 m, and t = 0.2 m. 11. Find the Buoyant Force of the water if half of the block will be submerged in water. 12. If the weight of the block changes to 300 N in water, how deep is the block submerged from its bottom?
The mass of the body is 90 kg, and the force is required I also want to solve the question in a maximum of 20 minutes
There two parallel discs, one is up and another is down, whose diameters are both d. The thickness of the gap between the two discs is ô. The dynamic viscosity coefficient of the liquid in the gap is µ. The below disc is fixed. The above disc rotated around the axis at the angular velocity o. How much is the torque to make the disc rotate?
Please heeeeeelp
A solid cylinder of 15 cm diameter and 60 cm long, consists of two parts made of different materials. The first part at the base is 1.20 cm long and of specific gravity= 5.0. The other parts of the cylinder is made of material having specific gravity of 0.6. What is the metacentric height of the cylinder. a.-0.304 cm b.-5.26cm c.0.325 cm d.2.387 cm