ı need answer and solution way please The 25-kg block shown in figure moves on a plane with two attached springs. Determine theacceleration of the block at B using Force and acceleration. The springl has a stiffness kl =%3D200 N/m and unstretched length is 0.4 m. The spring2 has a stiffness k2100 N/m andunstretched length is 0.7 m. The coefficient of kinetic friction between the crate and the planeis uk = 0.3.spring2F=100N300.5 m0.8 mspring1

Write down the given value using suitable variables. Here m signifies block B mass, k1 signifies…

The 25-kg block shown in figure moves on a plane with two attached springs. Determine the acceleration of the block at B using Force and acceleration. The springl has a stiffness k1 200 N/m and unstretched length is 0.4 m. The spring2 has a stiffness k2 100 N/m and %3! unstretched length is 0.7 m. The coefficient of kinetic friction between the crate and the plane is uk = 0.3. B F=100N spring2 30 0.5 m 0.8 m spring1

The 25-kg block shown in figure moves on a plane with two attached springs. Determine the acceleration of the block at B using Force and acceleration. The springl has a stiffness k1 200 N/m and unstretched length is 0.4 m. The spring2 has a stiffness k2 100 N/m and %3! unstretched length is 0.7 m. The coefficient of kinetic friction between the crate and the plane is uk = 0.3. B F=100N spring2 30 0.5 m 0.8 m spring1

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.50P: The block of weight W is pulled by the force P inclined at the angle to the horizontal. Find the...

See similar textbooks

Similar questions

Calculate the horizontal force P required to push the 85-lb lawn mower at constant speed. The center of gravity of the mower is at G, and the coefficients of rolling resistance are 0.12 for the front wheels and 0.18 for the rear wheels.
The 40-lb spool is suspended from the hanger GA and rests against a vertical wall. The center of gravity of the spool is at G and the weight of the hanger is negligible. The wire wound around the hub of the spool is extracted by pulling its end with the force P. If the coefficient of static friction between the spool and the wall is 0.25, determine the smallest P that will extract the wire.
The block of weight W is pulled by the force P inclined at the angle to the horizontal. Find the smallest force P and the corresponding angle that would cause impending sliding of the block. The angle of static friction between the block and the ground is s.
Find the smallest distance d for which the hook will remain at rest when acted on by the force P. Neglect the weight of the hook, and assume that the vertical wall is frictionless.
Draw the FBD for the bar described in Prob. 5.1 if the bar is homogeneous of mass 50 kg. Count the unknowns.
The force P applied to the brake handle enables the band brake to reduce the angular speed of a rotating drum. If the tensile strength of the band is 3800 lb, find the maximum safe value of P and the corresponding braking torque acting on the drum. Assume that the drum is rotating clockwise.
The lower block of mass m2 = 3.2 kg is pulled on by a rope with a tension force of 28 N. The upper block has mass m1 = 1.8 kg. The coefficient of kinetic friction between the lower block and the surface is 0.32. The coefficient of kinetic friction between the lower block and the upper block is also 0.32. What is the acceleration of the 3.2 kg block?
Q1. m-1 kg m,=4 kg The mechanism set up with m,, m, and weightless pulleys is as shown in the figure. Then, the masses are released. Static and kinetic friction between the inclined plane and m, are 0.6 and 0.5 respectively. What are the accelerations of m, and m,? (g = 10 m / s². Frictions and mass of the pulley are ignored.) Q2. 300 m/s .*........ yatay 100 m/s 320 m x=? A plane is flying horizontally at an altitude of 320 m with 300 m/s speed. It launches its bomb with 100 m/s speed relative to the plane as shown. How many meters away from the castle should the plane launch its bomb to hit the castle. (g=10 m/s², sin370=0.6; cos37°=0.8) Q3. 2 kg The object in the frictionless cone in the figure is making a uniform circular motion. Calculate, a) the normal force that the cone exerts on the object, b) centripetal force applied to the body, c) Find the speed of the object.
the system blocks shown below is in equilibrium, the weight of block A is 10 kN and for block B is 35 kN. The coefficient of friction between A and surface is 0.2 and between two block A and B is 0.15. Answer :the following P=40KN B The value of friction force between the * block B and it's surface is 25 kN 35 kN 15 kN Non above-mentioned * The system is in Equilibrium Impending to motion Kinematic
consider the mass and pulley system in the attached file. mass m1 = 29 kg and mass m2 = 12kg. the angle of the inclined plane is given and the coefficient of kinetic friction between mass m2 and the inclined plane is uk = 0.12. assume the pulleys are massless and frictionless when mass m2 moves a distance 4.94 m up the ramp, how far downward does mass m1 move? d= ?
A block of wood of mass 20 kg is supported as shown in the diagram. If the string suspending the 10 kg mass and connected to the 20 kg mass is light and inextensible and the coefficient of friction, u between the mass and the plane is 0.3 neglecting friction in the pulley (i) Compute the acceleration of the block. (ii) Determine the tension in the rope. 20 kg 10 kg 30°
The figure shows a spool and a vertical force of P = 250 N is applied to the cable. Determine the following: a) The acceleration of G, b) The angular acceleration of the spóol, and c) The Friction force. where the coefficients of static and kinetic friction between the 400mm of 200mm rail and the spool are u, = 0.25 and u = 0.2, respectively. The mass of the spool is 150 kg. The radius of gyration of the spool is kg = 250 mm (about its center of mass G). The Friction force (N) = Choose... + The acceleration of G (m/s2) = %3D Choose... + The angular acceleration of the spool (rad/s2): Choose...