Soru 1 2The compression ratio of an ideal Otto cycle is 8. At the beginning of the compression process, the air is at 100 kPa and Henüz cevaplanmadı 30°C. The temperature at the end of the isentropic expansion process is 500°C. Under cold-air-standard conditions (R=0.287 1,00 üzerinden kJ/kgK, Cy=0.718 kJ/kg K, Cp=1.005 kJ/kg K), the heat işaretlenmiş transferred to air during the heat-addition process is p Soruyu işaretle Lütfen birini seçin: a. 695 kJ/kg b. 851 kJ/kg c. 916 kJ/kg O d. 779 kJ/kg e. 874 kJ/kg

Soru 1 2The compression ratio of an ideal Otto cycle is 8. At the beginning of the compression process, the air is at 100 kPa and Henüz cevaplanmadı 30°C. The temperature at the end of the isentropic expansion process is 500°C. Under cold-air-standard conditions (R=0.287 1,00 üzerinden kJ/kgK, Cy=0.718 kJ/kg K, Cp=1.005 kJ/kg K), the heat işaretlenmiş transferred to air during the heat-addition process is p Soruyu işaretle Lütfen birini seçin: a. 695 kJ/kg b. 851 kJ/kg c. 916 kJ/kg O d. 779 kJ/kg e. 874 kJ/kg

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

! Required information Problem 09.034 - Ideal Otto Cycle with Variable Specific Heats - DEPENDENT MULTI-PART PROBLEM - ASSIGN ALL PARTS An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air is at 95 kPa and 27°C, and 760 kJ/kg of heat is transferred to air during the constant-volume heat-addition process. Take into account the variation of specific heats with temperature. The gas constant of air is R = 0.287 kJ/kg-K. Problem 09.034.a - State After Heat Addition in Variable Heat Capacity Ideal Otto Cycle Determine the pressure and temperature at the end of the heat-addition process. (You must provide an answer before moving on to the next part.) The pressure at the end of the heat-addition process is 3915.8 kPa. The temperature at the end of the heat-addition process is 1647.7 K.
The engine has four cylinders with a total capacity of 2200 cc. Assuming a cut-off ratio of 1.8 and using the cold-air-standard assumptions, determine how much power the engine will deliver at 3500 rpm. An ideal two-stroke diesel engine has a compression ratio of 21 and uses air as the working fluid. The state of air at the beginning of the compression process is 70°C and 97 kPa. P, Isentropic qout Isentropic
Assuming a compression ignition engine having a cut-off ratio of 2 and a compression ratio of 20. Before the compression stroke, air is at 100kPa, 20°C and a volume of 500 cm³. Determine (in kPa) the mean effective pressure of the cycle
An iseal Brayton cycle has a pressure ratio of 6:1. The temperature of the air is 22 degrees celsius at the inlet to the compressor and 1080 derees celsius at the inlet to the turbine. Take specific heat at constant pressure and constant volume for air as 1,006 KJ/kg K and 0,717 KJ/kg K respectively. Calculate: 1. the compresion absolute temperature to one decimal place 2. the work ratio of the plant to three decimal places 3. the specific work output to the turbine and specific work input to the compressor , to one decimal place and SI unit 4. the thermal efficiency of the plant to one decimal place
An ideal Otto cycle has a compression ratio of 8. At the beginning of thecompression process, air is at 100 kPa and 170C, and 800 kJ/kg of heat is transferredto air during the constant-volume heat-addition process. Accounting for thevariation of specific heats of air with temperature, determine (a) the maximumtemperature and pressure that occur during the cycle, (b) the net work output, (c)the thermal efficiency, and (d) the mean effective pressure for the cycle. (e) Also,determine the power output from the cycle, in kW, for an engine speed of 4000 rpm(rev/min). Assume that this cycle is operated on an engine that has four cylinderswith a total displacement volume of 1.6 L.
An ideal Otto cycle has a compression ratio of 8. At the beginning of the Compression process, air is at 100 kPa and 17°C, and 800 kJ/kg of heat is Transferred to air during the constant-volume heat-addition process. (a) the maximum temperature and pressure that occur during the cycle, (b) The net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle. P. kPa Isentropic 4 in Isentropic 100 Jour V₁ = V₁
Required information Problem 09.052 - Ideal Diesel Cycle with Variable Specific Heats - DEPENDENT MULTI-PART PROBLEM - ASSIGN ALL PARTS An air-standard Diesel cycle has a compression ratio of 16 and a cutoff ratio of 2. At the beginning of the compression process, air is at 103 kPa and 27°C. Account for the variation of specific heats with temperature. The gas constant of air is R= 0.287 kJ/kg-K. Problem 09.052.b - Thermal Efficiency in Variable Heat Capacity Diesel Cycle Determine the thermal efficiency. (You must provide an answer before moving on to the next part.) The thermal efficiency is 59.38 %.