Question 1 2 = 40 m P2 = 350 kPa gage a2 = 1.0 1= 30 m P1 = 70 kPa gage a = 1.0 - Pipe D= 0.5 m head loss in pipe = 3 m Pump Water Q = 0.5 m3/s • A pipe 50 cm in diameter carries water (10°C) at a rate of 0.5 m3/s. A pump in the pipe is used to move the water from an elevation of 30 m to 40 The pressure at section 1 is 70 kPa gage and the pressure at section 2 is 350 kPa gage • What power in kilowatts and in horsepower must be supplied to the flow by the pump?

Question 1 2 = 40 m P2 = 350 kPa gage a2 = 1.0 1= 30 m P1 = 70 kPa gage a = 1.0 - Pipe D= 0.5 m head loss in pipe = 3 m Pump Water Q = 0.5 m3/s • A pipe 50 cm in diameter carries water (10°C) at a rate of 0.5 m3/s. A pump in the pipe is used to move the water from an elevation of 30 m to 40 The pressure at section 1 is 70 kPa gage and the pressure at section 2 is 350 kPa gage • What power in kilowatts and in horsepower must be supplied to the flow by the pump?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A pump delivers water from a tank (A)X water surface elevation-110m) to tank B (water surface elevation= 170m). The suction pipe is 45m long and 35cm in diameter the delivered pipe is 950m long 25cm in diameter. Loss head due to friction hf1 = 5m and h2 3m If the piping are from pipe(1)= steel sheet metal pipe(2)= stainless – steel Calculate the following i) ii) The discharge in the pipeline The power delivered by the pump.
Q1/ Water. p=1.94 slugs/ft' and v=0.000011 ft/s, is pumped between two reservoirs at 0.2 ft/s through 400 It of 2-in-diameter pipe and several minor losses coefficient is(12.2m), as shown in Fig. 1. The roughness ratio is s/d = 0.001. Compute the pump horsepower required. MY (2) Z₂=120ft Z=20 ft Pump Fig.1 D=2 in
Length and dia. Of pipe 1 are 2000m and 1m while the second pipe is 2000m and dia. Of 0.8m .Find the rate flow of each pipe if the total flow rate in the main pipe is 0.3 m3/s. the coefficient friction of each pipe is same and equal to 0.05. Ans.Q1= 1.906 m3/s , Q2=1.094m3/s Ex. A pipe of dia.=20cm and length 2000m is connects two reservoir having difference of water levels as 20m determine the discharge through pipe. If an additional pipe of diameter 20cm and length 1200 m is attached to the last 1200m length of the existing pipe, find the increase in the discharge. f=0.015 neglect minor losses. Ans.Q= 0.0254 m3/s , increase to discharge 0.0088m3/s Ex. Pipe of L=4000m and dia.=0.6m as shown in fig. At a distance of 1000m from the upper reservoir , a small pipe is connected to the pipe line. The water can be taken from the small pipe. Find discharge to the lower reservoir a- No water is taken from the small pipe b-100 liter/sec of water is taken from small pipe. f30.005 neglect minor…
Reservoirs A, B and C are located atop a hill as shown. Use the formula for headloss: hf = 0.083f Q² with f= 0.011 for all pipes. Calculate the flow rates in the three pipes. EL 30 A EL 25 B L = 1200m D = 300mm %3D EL 15 L2 = 900m D2 = 200mm %3D B L3 = 1500m D3 = 150mm %3D
1) A smooth steel pipe of diameter 500 mm and length 850 m carry water at the rate of 0.05 m3/sec. Find the head lost due to friction. Take Kinematic Viscosity of water as 0.018 x 10 m2/sec 2)Determine the friction factor, “f” if Ethyl Alcohol at 25 C is flowing at 5.3 m/sec in a standard DN 40 Schedule 80 steel pipe 3)Determine the energy loss that will occur as 100 Liters / min of water flows from a small copper tube to a larger tube through a gradual enlargement having an included angle of 30 degrees. The small tube has a 25 mm OD x 1.5 wall thickness; the large tube has an 80 mm OD x 2.8 mm wall thickness.
dhe low + DarucienCatculation ot (sesistance zomes Hame pumpseRue, operoting pr 3. Problems: two vessels are connected by a pipe of the diameter of d=100 mm and length of l=12 m, made of steel. Calculate the level difference H of water in the vessels. Flow rate is Q=300 m/h, temperature t=20°C. Take into account the all energy losses. Grei=3. d.!
please find minimum pumping power? First tube lenght= 20m first tube diameter=6cm second tube lenght= 35m second tube diameter=4cm water height= 30m flow=22Lt/second sharp edge loss = 0.5 g=9.81m/sn2, ε=0.00026m, μ=1.139x10-3kg/m.sn
C EL:5.50m EL:4.00m Tank-A EL:1.00m- Vz A siphon consist a 15 cm diameter of pipe which is used to empty kerosene oil (rd = 0.8) from a tank A. The siphon discharges to the atmosphere at an elevation of 1.00 m. The centreline of the siphon pipe (point C) is at an elevation of 5.50 m. The losses in pipe can be assumed to be 0.5 m and 1.2 m from point 1 to C and point C to point 2, respectively. Estimate: (a) Discharge in the pipe (b) Pressure at point C
water is being delivered at a rate of 2000 gpm for a reservoir to a subdivison below resvoir height=220ft length of pipe= 1500ft final aubdivisiion= 24ft, 20psi 1)determine the normal pipe size 2) if the pipe size is not avalible what size combination will work 3) if we used a 8 inch pipe determine the min thickness 4)determine the max pressure that can deelope in the 8in system
Water temperature = 15 deg C Steel pipe diameter = 25 cmLength of pipe = 450 mRoughness = 3.2 mmHead loss = 7.2 mFind: If water flows through the pipe, find the volumetric flow rate of water.
Consider flow of water (μ = 0.001 Pa-s) in the 6-cm diameter cast-iron (ε = 0.26 mm) pipe shown in the figure. What is the discharge in the pipe? a.70.2 lps d = 6 cm b.10.9 lps ㅗ c.40.5 lps F d.100.2 lps 10 m P₁ = 250,000 Pa P₁ = 350,000 Pa Consider the EGL and HGL of the 200-m pipeline shown. There is a turbine at CD and the fluid is water. Neglect minor losses. What is the velocity in pipe BC? 258.482 m EGL 252.646 m 235.138 m a.29.72 m/s b.5.84 m/s c.10.70 m/s 160.085 m d.45.03 m/s A HGL L = 100 m 229.302 m 190.106 m B 115.053 m 75.053 m f = 0.01 40° 120.085 m CD f = 0.01 45.032 m 0 m E
Question 5: The pump shown below delivers a head of 50 m to the water through 30 cm diameter with pipe length 500 m. If the head loss is given by determine. L V² 0.02 / 1. The flow rate (Q) through the system in m³/s 2. The input power (Pi) required to supply the pump if the efficiency=75% 2 40 m L w **** AVB