A pump delivers water from a tank (A)X water surface elevation=D110m) to tank B (water surface elevation= 170m). The suction pipe is 45m long and 35cm in diameter the delivered pipe is 950m long 25cm in diameter. Loss head due to friction h1 = 5m and hp = 3m If the piping are from pipe(1)= steel sheet metal pipe(2)= stainless – steel Calculate the following i) ii) The discharge in the pipeline The power delivered by the pump.

A pump delivers water from a tank (A)X water surface elevation=D110m) to tank B (water surface elevation= 170m). The suction pipe is 45m long and 35cm in diameter the delivered pipe is 950m long 25cm in diameter. Loss head due to friction h1 = 5m and hp = 3m If the piping are from pipe(1)= steel sheet metal pipe(2)= stainless – steel Calculate the following i) ii) The discharge in the pipeline The power delivered by the pump.

Name: A pump delivers water from a tank (A)X water surface elevation-110m)
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A pump delivers water from a tank (A)X water surface elevation-110m) to tank B (water surfaceelevation= 170m). The suction pipe is 45m long and 35cm in diameter the delivered pipe is 950m long25cm in diameter. Loss head due to friction hf1 = 5m and

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

2. A turbine is used to produce 2700 hp by expanding the water between points 1 and 2. Water flow rate, static pressures and pipe diameters are given. Calculate the power lost in between point one and two. Note that the static pressure at point 2 is given in vacuum. (SGH =13.6) P1 = 60 psi Q = 150 ft³/s D = 3 ft Section (1) Turbine 10 ft P2 10-in. Hg %3D vacuum D2 = 4 ft Section (2)
water is being delivered at a rate of 2000 gpm for a reservoir to a subdivison below resvoir height=220ft length of pipe= 1500ft final aubdivisiion= 24ft, 20psi 1)determine the normal pipe size 2) if the pipe size is not avalible what size combination will work 3) if we used a 8 inch pipe determine the min thickness 4)determine the max pressure that can deelope in the 8in system
A paint shop in the water flow through the pipe in the radius r Q = 0.05 m /s, density p= 1000 kg/m 3 type. The pipe friction coefficient is Cf= 0.0075 and the local loss coefficient K = 10. Pressure drop in the pipe; AP = p 2C K %3D where the water velocity in the pipe can be calculated with V = Q/(r²). What should be the radius of the pipe so that the pressure drop that will occur in a pipe of L = 100 m length does not exceed AP = 200 000 N/ m 2? State the tolerance value provided by the result you found.
Water temperature = 15 deg C Steel pipe diameter = 25 cmLength of pipe = 450 mRoughness = 3.2 mmHead loss = 7.2 mFind: If water flows through the pipe, find the volumetric flow rate of water.
C EL:5.50m EL:4.00m Tank-A EL:1.00m- Vz A siphon consist a 15 cm diameter of pipe which is used to empty kerosene oil (rd = 0.8) from a tank A. The siphon discharges to the atmosphere at an elevation of 1.00 m. The centreline of the siphon pipe (point C) is at an elevation of 5.50 m. The losses in pipe can be assumed to be 0.5 m and 1.2 m from point 1 to C and point C to point 2, respectively. Estimate: (a) Discharge in the pipe (b) Pressure at point C
1. in a section of horizontal piper with a diameter of 3cm the pressure is 5.21 kpa and water is flowing with a speed of 1.50m/s. the pipe narrows to 2.50cm. what is the pressure in the narrower region if water behaves like an ideal fluid of sensity 1000kg/m3 2. tensile stress a. the ratio of elasic modules to strain b. the applied force per crosssectional area c. the ratio of change in length to the orig length d. the strain per unit legth e. the same as force
Q2- A (0.14 m/s) oil has (density 880 kg/m³ & viscosity 0.026 pa.s) is pumping from first tank to second tank by using centrifugal pump and discharge pipeline 12 inch in diameter. If the pipe roughness is 0.045mm: 1- Calculate pipe frictional head loss for discharge pipe 6100m in length. 2- Calculate pump liquid power if oil level in first tank 7 m, the oil level in second tank is 14 m, and the suction pipe length is 53 m and diameter is 14 inch.
-Example the values. asystem total head. against for the initial condition, show below - give the Lallowiny data dynamic uiscosity of liquid Calculate capacity curve density S-1200 kgim3 Static head on Suction Side 7S-3m Static heac on discharge Side Zd= 7m inside diameter of pipe di = o.052m -pipe roughress E3D0.00045m. gas pressure aboue the liquid in the tank Side of the pump the Suction Ps= atmospheric pressure. gas pressure above the liquicd in the tank on discharge side of the pump. the dund Pd= atmesperic pressure
1 QUESTION 1 Consider a desired pump operating condition which adds 35 psi at a flowrate of 500 gpm to water (p= 62 11m/ft²³) Ignore any changes in Kinetic or potential energy and Tassume isothermal flow C.e. internal energy is constant, this is the normal assumption we make when analyzing fluid flows in piping systems). Apply the energy balance only across the pump with full energy Balance and simlifying to solve for the pump, Starting head symbolically. Then begin careful of units, Solve for pump head in feet. GIVEN: 35psi 500 gpm p=62 1bm/3 XA. 10.5 A B. 100.8 ft C. 50.1 ft D. 80.7f 35 500 62 (32.2) + 2(32.2) 35 + 500
62.4¹,Mw lb Water (Yw ft³ an average velocity of 5 ft/s. Find the change in pressure over 39 ft of pipe. Provide your answer in = D 23.6 x 10-6 ) flows through the 4-in. diameter pipe below with -6 lb-s ft² lb ft² The pipe has roughness of 2x10-4ft. L
Q1) Figure Ql shows piping system with pump to drive the oil upward from A (P=PA kPa) to B (P=180 kPa) at a mass flow rate of 3 kg/s. Determine type of flow and calculate required pump power. Given data: oil density and viscosity are 891 kg/m³ and 0.29 N.s/m² respectively. Use Hagen Poiseulli equation for loss: he128µQL/(xpgD“) and Power=Qpghr; Triangle geometry: a²=b²+c² Dripe = 3 mm 15 m Pump 20 m Figure O1
m². -5 S Figure shows a portion of a fire protection system in which a pump draws water at 60°F (v =1.21 ×10¯ from a reservoir and delivers it to a point B at the flow rate of 1500 gal/min. Calculate the required height h of the water level in the tank in order to maintain 5.0 Psig pressure at point A h 25 ft A Pump 2600-ft-long 8-in Schedule 40 steel pipe Flow Flow 45-ft-long 10-in Schedule 40 steel pipe B