Q:The circular spiral column AB shown in Figure, is a part of braced frame and has adiameter of 420mm and reinforced with 7Ø25mm longitudinal bars. Service loading ateach end consist of concentric load of (P-210KN and P=120KN) and eccentric load of(P=105kN and Pa=73KN) with eccentricity(e). Determine maximum safe value ofeccentricity(e). Use fc'=28MPA, fy=400MPA.lø=420mmB4.58m4.58mlø=420mmØ=420mmlØ=420mm6.Α Ψ-1.07025L420mmSection A-API=210KNPd=120KNPl=105kNPd=73kNeBAPI=105kNPd=73KNPI=210KNPd=120KNLoading of column A-B00mmwwoog

Given dataDiameter of circular column d = 420mmConcentric load P1 = 210kN nad Pd = 120kNEccentric…

Q:The circular spiral column AB shown in Figure, is a part of braced frame and has a diameter of 420mm and reinforced with 7025mm longitudinal bars. Service loading at each end consist of concentric load of (P=210KN and P=120KN) and eccentric load of (P=105kN and P-73KN) with eccentricity(e). Determine maximum safe value of eccentricity(e). Use fc'=28MPa, fy=400MPA. 0=420mm 4.58m 4.58m 0=420mm Ø=420mm Ø=420mm A w=1.0 h600mm y600mm 6.7m 4.4m

Q:The circular spiral column AB shown in Figure, is a part of braced frame and has a diameter of 420mm and reinforced with 7025mm longitudinal bars. Service loading at each end consist of concentric load of (P=210KN and P=120KN) and eccentric load of (P=105kN and P-73KN) with eccentricity(e). Determine maximum safe value of eccentricity(e). Use fc'=28MPa, fy=400MPA. 0=420mm 4.58m 4.58m 0=420mm Ø=420mm Ø=420mm A w=1.0 h600mm y600mm 6.7m 4.4m

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.5.19P: A bracket ABCD having a hollow circular cross section consists of a vertical arm AB{L = 6 ft), a...

See similar textbooks

Similar questions

AW310 × 74 wide-flange steel column with length L = 3.8 m is fixed at the base and free at the top (see figure). The load P acting on the column is intended to be centrally applied, but because of unavoidable discrepancies in construction, an eccentricity ratio of 0.25 is specified. Also, the following data are supplied: E = 200 GPa, y = 290 MPa, and P = 310 kN. What is the maximum compressive stress max in the column? What is the factor of safety n with respect to yielding of the steel?
A square wood column with side dimensions b (see figure) is constructed of a structural grade of southern pine for which Fc= 10,5 MPa and E = 12 GPa. An axial force P = 200 kN acts on the column. If the dimension b = 150 mm, what is the maximum allowable lensth Lmax, of the column? If the length L = 4.0 m, what is the minimum required dimension bmin?
The wide-flange, pinned-end column shown in the figure carries two loads: a force P1= 450 kN acting at the centroid and a force P2= 270 kN acting at a distance s = 100 mm from the centroid. The column is a W250 x 67 shape with L = 4.2 m, E = 200 GPa, and y= 290 MPa. What is the maximum compressive stress in the column? If the load P1remains at 450 kN, what is the largest permissible value of the load P2in order to maintain a factor of safety of 2.0 with respect to yielding?
A pinned-and column of a length L = 2A m is constructed of steel pipe (E = 210GPa) having an inside diameter d1= 60 mm and outside diameter d2= 68 mm (sec figure). A compressive load p = 10 kN acts with eccentricity e = 30 mm. What is the maximum compressive stress max in the column? If the allowable stress in the steel is 50 MPa, what is the maximum permissible length Lmaxof the column?
A square wood column with side dimensions b (see figure) is constructed of a structural grade of spruce for which Ft. = 900 psi and E = 1,500,000 psi. An axial force P = 8.0kips acts on the column. If the dimension b = 3.5 in., what is the maximum allowable length Lmaxof the column? If the length L = 10 ft, what is the minimum required dimension bmin?
Column AB has a pin support at A,a roller support at B, and is compressed by an axial load P (see figure). The column is a steel W12 × 35 with modulus of elasticity E = 29,000 ksi and proportional limit pl = 50 ksi. The height of the column is L = 12 ft. Find the allowable value of load P assuming a factor of safety n = 2,5.
A wood column with, a rectangular cross section (see figure) is constructed of 4 in. × 8 im construction grade, western hemlock: lumber (Fc = 1000 psi, E = 1,300,000 psi). The net cross-sectional dimensions of the column arc b = 3.5 in. and h = 7.25 in. (see Appendix G). Determine the allowable axial load Pallow. for each of the following lengths: L = 6 ft, 8ft, and 10 ft.
Continuous cable A DB runs over a small friction less pulley al D to support beam OABC, which is part of an entrance canopy for a building (see figure}. The canopy segment has a weight W = 1700 lb that acts as a concentrated load in the middle of segment AB. (a) What is the maximum permissible value of load P at C if the allowable force in the cable is 4200 lb? (b) If P = 2300 lb, what is the required diameter of pins A, B, and D? Assume that the pins are in double shear and the allowable shear stress in the pins is 10 ksi.
A steel column ( E = 30 X 103 ksi) that is fixed at the base and free at the top is constructed of a W8 x 35 wide-flange member (sec figure). The column is 9.0 ft long. The force P acting at the top of the column has an eccentricity e = 1.25 in. If P = 40 kips, what is the maximum compressive stress in the column? If the yield stress is 36 ksi and the required factor of safety with respect to yielding is 2.1, what is the allowable load Pallow?
Solve the preceding problem for an aluminum column with b = 6,0 in., t = 0.5 in., P = 10 kips, and E = 10.6 × 106 ksi. The defied ion at the top is limited to 2.0 in.
Solve the preceding problem for a W 250 × 89 steel column having a length L = 10 m. Let E = 200 GPa.
A long slender column ABC is pinned at ends A and C and compressed by an axial force F (sec figure). At the midpoint B, lateral support is provided to prevent deflection in the plane of the figure. The column is a steel wide-flange section (W 250 × 67) with E = 200 GPa. The distance between lateral supports is L = 5.5 m. Calculate the allowable load P using a factor of safety n = 2.4, taking into account the possibility of Eu 1er buckling about cither principal centroidal axis (i.e., axis 1-1 or axis 2-2).