Q/ A flexible pavement was designed for the following daily traffic with a 12-year design life: 1300 single axles at 8,000 lb each, 900 tandem axles at 15,000 lb each, 20 single axles at 40,000 lb each, and 200 tandem axles at 40,000 lb each. The highway was designed with 4 inches of hot-mix asphalt (HMA) wearing surface, 4 inches of hot-mix asphaltic base, and 8 inches of crushed stone subbase. The reliability was 70%, overall standard deviation was 0.5, APSI was 2.0 (with a TSI of 2.5), and all drainage coefficients were 1.0. What was the soil resilient modulus of the subgrade used in design?

12. Refer to Figure II-1 attached. A flexible pavement is to be evaluated according to the AASHTO 1972 design guide. The existing pavement has a weighted structural number=3.4, a regional factor=2.0, and a soil support value=4.5. What would be the approximated number of daily equivalent 18-kip axles to be allowed on this road for a 20-year analysis period?a. 10b. 33c. 100d. 1490

The data given below pertain to the design of a flexible pavement. Initial trafic = 1213 cvpd Traffic growth rate = 8 percent per annum Design life = 12 years Vehicle damage factor = 2.5 Distribution factor = 1.0 The design traffic in terms of million standard axles (msa) to be catered would be

on paper solution and work