(PROBLEM 2) A three-member frame ABCD is loaded with ultimate gravity and lateral loads as shown in the figure. The compressive strength of concrete=21MPa, fy=415 MPa, beam width=300mm, beam height=600mm, main bar diameter-28mm, concrete cover-40mm, and stirrups diameter=10mm. Calculate the stress of compression reinforcement in the final section in MPa.

(PROBLEM 2) A three-member frame ABCD is loaded with ultimate gravity and lateral loads as shown in the figure. The compressive strength of concrete=21MPa, fy=415 MPa, beam width=300mm, beam height=600mm, main bar diameter-28mm, concrete cover-40mm, and stirrups diameter=10mm. Calculate the stress of compression reinforcement in the final section in MPa.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

-10 In prestressed concrete we select one of the following materials strengths: Select one: out of O a. fy = 1725 N/m2, fc= 30 N/m2 question O b. fc: = 50 N/m2, fy = 410 N/m2 O c. fy = 40 N/m2. fc = 1725 N/m2 O d. fc = 40 N/m2. fy= 1100 N/m2
Please give me the correct solutions and answer of this problem in principles of reinforced/prestressed concrete
4. An interior reinforced concrete slab has to be designed to support a live load and a dead load in addition to its own weight based on the following specifications: The slab is one-way and simply supported with a span of 12 ft. The live load on the slab is 200 psf. The dead load on the slab is 100 psf. Your design will use concrete compressive strength fe= 3000 psi and steel yield strength of fy = 40,000 psi
Hello, please solve the question about reinforced concrete from the sixth and seventh chapters of the third civil stage
ineed the answer ASAP.ty 3decimal final answer Do not round off in between solution
Calculate the uniform load w (in addition to the beam weight) that will cause the section shown to begin to crack if used as a 28-ft simply supported beam. Use normal weight concrete with L=4000 psi. f = 60,000 psi, E₁=29,000 ksi, and the reinforced concrete weight = 150 lb/ft³. 4 in. 28 ft 4 in. 22 in. 30 in. 2 in. 2 in. 3 #9 ● ||—12 in—-|
7.b
An open rectangular tank measuring 5 m long, 1.7 m wide, and 2 m high is filled to a depth of 1.6 m with water. The tank is attached to a truck that is traveling horizontally at 9.81. How much water (m³) is left if the track is traveling horizontally at 9.81
using the table below, answer the question
Q.1\ A column of a cross-section (350x450)mm is reinforced with 4 bars of (25mm) in diam., knowing that Es=200,000MPa and Ec 22,500MPa and f28MPa and fy = 420 MPa determine the following: 1. The axial load that will stress the concrete to 10 MPa. 2. The normal axial compression strength.
What is the threshold torsion (kN-m) of a rectangular beam with a width of 446 mm and an over-all depth of 536 mm? The distance of the tension reinforcements from the bottom fiber of the beam is 75 mm. The specified compressive strength of concrete is 22.00 MPa. The yield strength of tension reinforcements and stirrups are 404 MPa and 323 MPa respectively.