MA le Pb Input to a 11-kV, 36, Y-connected, synch motor is 60 A. Effective resistance per phase Synchronous reactance per phase 12 3052 Find a) power supplied to the motor ( Pin) b) induced emf for a 0.8 leading a) Pin = √3 V. I. cost = √3 Pin = (3 /(11000) 914.52 kW 11000) (60) (0.8) = Pb b) Ep = √p - Ja (Zip) 1100020 -(60236.87") (1+0) induced emf per phase E 7528.95 L-11.31 VI E = 6 × √3 E = 13,040 V final ans. line E dapat A. 2,200 V 30 star-connected S.M. has a resistance of 0.6 2 and synch reactance of 6. Find generated emf and the angular retardation of the motor when input is 200kW Ed ولا 2200 √3 at unity pf. Ia Zsp - (62.49 20°)(0.6 +16) 40° E = 1,278.09 L-14.27° FO√3 E2213.71 V Angular retardation 14.27° bw Vand E tinanggal sign na (-) to dae man hingpot kung leading / lagging 2024-04-26 Problem A 3-phase, 220-V, 50-Hz, 1500 r.p.m., mesh- connected synchronous motor has a synchronous impedance of 4 ohm per phase. It receives an input line current of 30 A at a leading power factor of 0.8. Find the line value of the induced e.m.f. and the load angle expressed in mechanical degrees. Ans. 268V, 6°

MA le Pb Input to a 11-kV, 36, Y-connected, synch motor is 60 A. Effective resistance per phase Synchronous reactance per phase 12 3052 Find a) power supplied to the motor ( Pin) b) induced emf for a 0.8 leading a) Pin = √3 V. I. cost = √3 Pin = (3 /(11000) 914.52 kW 11000) (60) (0.8) = Pb b) Ep = √p - Ja (Zip) 1100020 -(60236.87") (1+0) induced emf per phase E 7528.95 L-11.31 VI E = 6 × √3 E = 13,040 V final ans. line E dapat A. 2,200 V 30 star-connected S.M. has a resistance of 0.6 2 and synch reactance of 6. Find generated emf and the angular retardation of the motor when input is 200kW Ed ولا 2200 √3 at unity pf. Ia Zsp - (62.49 20°)(0.6 +16) 40° E = 1,278.09 L-14.27° FO√3 E2213.71 V Angular retardation 14.27° bw Vand E tinanggal sign na (-) to dae man hingpot kung leading / lagging 2024-04-26 Problem A 3-phase, 220-V, 50-Hz, 1500 r.p.m., mesh- connected synchronous motor has a synchronous impedance of 4 ohm per phase. It receives an input line current of 30 A at a leading power factor of 0.8. Find the line value of the induced e.m.f. and the load angle expressed in mechanical degrees. Ans. 268V, 6°

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A 3Ø, Y-connected alternator is rated at 1,600KVA, 13.5KV. The armature effective AC resistance per phase is 1.50. The percentage regulation for a load of 1,280kW at unity power factor is 3.5%. Determine: (a) synchronous reactance of the alternator (b) %VR at full-load 0.8pf leading (c) What is the effect on %VR value if taken at half-load lagging pf? Justify and explain briefly your answer on one(1) sentence.
S:06) a) A three-phase motor with delta connection is supplied as in Figure below. Determine the Voltage Unbalance Factor of the motor b) Proof that the percentage of voltage unbalance determination using maximum deviation method is bigger than the symmetrical components method for problem in (a).
Which of the following phase sequence of harmonics causes torque pulsing (parasitic torque), vibration and reduces the life of an induction motor?"Negative & PositiveNegativePositiveZero
380 V, 50 Hz, 2p = 6, star connected induction motor impedance in ohms per phase values:R1 = 0.3, X1 = j0.45, R2 = 0.15, X2 = j0.45, Xm = j15Its total mechanical losses are 500W. Core losses are negligible. For a rotor slip of 0.01 at rated voltage, calculate the following:a. Input currentb. power factorc. rotor frequency
Two alternators rated 400 MW and 600 MW are operating in parallel. The droop characteristics of their governors are 3% and 4% respectively from no load to full load. Assuming that the alternators are operating at 50 Hz at no load, how would a load of 1000 MW be shared between them? What will be the system frequency at this load? [Ans. G1 = 468.132 MW, G2 = 531.669 MW, f= 48.296 Hz]
A 1200 kW,60 Hz synchronous alternator A identical governor droop of 0.0005 Hz/kW.Machine A takes two third of 1000kW bus load at 60 Hz.lf an additional 800 kW load is connected to the bus determine (a) bus frequency (b) load on each machine. is in parallel with a 400 kW,60 Hz alternator B.Both machines have (a) 58.6 Hz (b) 566.67 kW, 433.33 kW. (a) 59.6 Hz (b) 866.67 kW, 133.33 kW (a) 59.8 Hz (b) 666.67 kW, 333.33 kW (a) 58.9 Hz (b) 766.67 kW, 233.33 kW
TUTORIAL PROBLEMS 2. A long shunt compound ganerator has full losd output of 100 kW st 250 volts. The armature, series and shunt windings bave rmistances of 0-05 ,0-03 0 and 55 respectively. Find the Brmature current and L A 4 oele shunt gmerstor with wave-wound armature has 41 alots, nch having 12 conductors. Th muture resistance is 0-05 and shunt field resistance is 200 . The flux per poie in 25 mWh. Ifa lond ce of 10 is connected soros the armabure ferminals, calculate the voltage scross the lond w mrior is driven at 1000 rp.m 389-5 V pmented emf 464-5 A, 282-3 V
A 50-MVA, 30-kV, three-phase synchronous generator has a synchronous reactance of 8 Ohms/phase and negligible armature resistance. The generator is delivering 50 MVA at 0.8 pf leading to an infinite bus at the rated voltage. Determine the excitation per phase E and the power angle &. Select one: O a. E = 22.78 KV and 8= 15.67 deg. O b. E = 14.115 KV and 8= 25.85 deg. O c. None of these O d. E = 13.96KV and 8= 29.74 deg. O e. E = 27.47KV and 8= 22.84 deg. Impedances are marked in perunit on a 100MVA, 100 KV base. The load at bus 2 is S2= 16MW - 132 MVAR, and the load at EN ? 1:4 4/1- TOSHIBA
B) fill in the blanks: that of rotor MMF. 1)In a 3-phase synchronous motor the speed of stator MMF is ......... 2)The synchronous reactance of the synchronous machine is....... 3) When two transformers are operating in parallel, they will share the load as under...... 4)A synchronous motor is operating on no-load at unity power factor. If the field current is increased, power factor will become..
B. Open-Ended Question 6. A 45 hp, 50 Hz, 415 V delta connected induction motor has a full load efficiency of 0.80 and p.f0.60. The p.f is to be improved to 0.9 using static capacitors. Determine (i) rating of capacitor bank kVAR, (ii) capacitance of each unit, if they connected as (a) delta, and (b) star, in uF. 7. Figure 1 shows the electrical power system with rated capacity of S₁= S₂=25 MVA, connected with two step-up transformers 11 kV/66 kV, respectively. The short circuit fault at point 'p' occurs at the outlet of transmission line. Calculate the short circuit current and three phase short circuit capacity occur at the point 'p'. S₂=25 MVA G₁ % Xg1 = 30 T₁ % XT1= 5 Transmission line 11/66 kVA S₂=25 MVA T₂ CB ~) G₂ % Xg2 = 30 % XT2 = 8 11/66 kVA
SYNCHRONOUS GENERATOR A 13.8 kV, 50-MVA, 0.9 p.f., 60 Hz, four pole, Y-connected synchronous generator has a synchronous reactance of 2.5 ohms, and an armature resistance of 0.2 ohm. At 60 Hz, its friction and windage losses are 1 MW, and its core losses are 1.5 MW. The field circuit has a dc voltage of 120 V, and the maximum field current is 5A. The current of the field circuit is adjustable over the range from 0 to 10 A. The OCC of this generator is shown in the figure.
A three phase Y connected synchronous motor, 6600 V L-L , delivers500 KW to the full load . Its full load efficiency is 83%, its armatureresistance is 0.3 ohm per phase and synchronous reactance is 3.2 ohmper phase. If it’s working with 0.8 leading power factor on full loadcalculate:1- Generated EMF on full load.2- The power angle.