In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.17 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the tube. If the tube is 10 m long, what is the required heat flux? If fluid enters the tube with a fully developed velocity profile and a uniform temperature profile, what is the surface temperature at the tube exit? Fluid properties may be approximated as p = 1000 kg/m³, cp = 4000 J/kg-K, μ = 2× 10³kg/s-m, k = 0.8 W/m-K, and Pr = 10. Determine the required heat flux, W/m². q=i W/m² Determine the surface temperature at the tube exit, in °C. Tsp = i °C Physical Properties Mathematical Functions

In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.17 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the tube. If the tube is 10 m long, what is the required heat flux? If fluid enters the tube with a fully developed velocity profile and a uniform temperature profile, what is the surface temperature at the tube exit? Fluid properties may be approximated as p = 1000 kg/m³, cp = 4000 J/kg-K, μ = 2× 10³kg/s-m, k = 0.8 W/m-K, and Pr = 10. Determine the required heat flux, W/m². q=i W/m² Determine the surface temperature at the tube exit, in °C. Tsp = i °C Physical Properties Mathematical Functions

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter6: Forced Convection Over Exterior Surfaces

Section: Chapter Questions

Problem 6.55P

See similar textbooks

Similar questions

6.3 Steam at 100 kPa and is flowing across a 5-cm- OD tube at a velocity of 6 m/s. Estimate the Nusselt number, the heat transfer coefficient, and the rate of heat transfer per meter length of pipe if the pipe is at .
6.1 Determine the heat transfer coefficient at the stagnation point and the average value of the heat transfer coefficient for a single 5-cm-OD, 60-cm-long tube in cross-flow. The temperature of the tube surface is , the velocity of the fluid flowing perpendicular to the tube axis is 6 m/s, and the temperature of the fluid is . Consider the following fluids: (a) air, (b) hydrogen, and (c) water.
7.43 Liquid sodium is to be heated from 500 K to 600 K by passing it at a flow rate of 5.0 kg/s through a 5-cmID tube whose surface is maintained at 620 K. What length of tube is required?
In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.22 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the tube. If the tube is 10 m long, what is the required heat flux? If fluid enters the tube with a fully developed velocity profile and a uniform temperature profile, what is the surface temperature at the tube exit? Fluid properties may be approximated as p = 1000 kg/m³, cp = 4000 J/kg-K, μ = 2 × 10³ kg/s-m, k = 0.8 W/m-K, and Pr = 10. Determine the required heat flux, W/m². q'" = W/m² i Determine the surface temperature at the tube exit, in °C. Tso = °C Physical Properties Mathematical Functions
In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.22 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the tube. If the tube is 10 m long, what is the required heat flux? If fluid enters the tube with a fully developed velocity profile and a uniform temperature profile, what is the surface temperature at the tube exit? Fluid properties may be approximated as ρ=ρ= 1000 kg/m3, cp=cp= 4000 J/kg·K, μ=μ= 2 × 10-3 kg/s·m, k=k= 0.8 W/m·K, and Pr=P⁢r= 10.
In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.19 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the tube. If the tube is 10 m long, what is the required heat flux? If fluid enters the tube with a fully developed velocity profile and a uniform temperature profile, what is the surface temperature at the tube exit? Fluid properties may be approximated as p = 1000 kg/m³, c, = 4000 J/kg-K, µ = 2x 10-3 kg/s-m, k = 0.8 W/m-K, and Pr = 10. Determine the required heat flux, W/m². W/m2 Determine the surface temperature at the tube exit, in °C. T = °C i S,0 Physical Properties Mathematical Functions
In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.21 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the tube. If the tube is 10 m long, what is the required heat flux? If fluid enters the tube with a fully developed velocity profile and a uniform temperature profile, what is the surface temperature at the tube exit? Fluid properties may be approximated as p = 1000 kg/m³, c, = 4000 J/kg-K, µ = 2x 103 kg/s-m, k = 0.8 W/m-K, and Pr = 10. Determine the required heat flux, W/m². q! = i W/m? Determine the surface temperature at the tube exit, in °C. i °C S,0
In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.19 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the tube. If the tube is 10 m long, what is the required heat flux? If fluid enters the tube with a fully developed velocity profile and a uniform temperature profile, what is the surface temperature at the tube exit? Fluid properties may be approximated as p = 1000 kg/m³, cp = 4000 J/kg-K, μ = 2 × 10-³ kg/s-m, k = 0.8 W/m-K, and Pr = 10. Determine the required heat flux, W/m². q'" W/m² Determine the surface temperature at the tube exit, in °C. = i °C 8,0
In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.21 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the tube. If the tube is 10 m long, what is the required heat flux? If fluid enters the tube with a fully developed velocity profile and a uniform temperature profile, what is the surface temperature at the tube exit? Fluid properties may be approximated as p = 1000 kg/m³, cp = 4000 J/kg-K, µ = 2x 10-3 kg/s-m, k = 0.8 W/m-K, and Pr = 10. Determine the required heat flux, W/m2?. q = i W/m? Determine the surface temperature at the tube exit, in °C. i °C
Current Attempt in Progress Consider pressurized water, engine oil (unused), and Nak (22 %/78%) flowing in a 20-mm-diameter tube. (a) Determine the mean velocity, in m/s, the hydrodynamic entry length, in m, and the thermal entry length, in m, for each of the fluids when the fluid temperature is 366 K and the flow rate is 0.014 kg/s. (b) Determine the mass flow rate, in kg/s, the hydrodynamic entry length, in m, and the thermal entry length, in m, for water and engine oil at 300 and 400 K and a mean velocity of 0.018 m/s. Part A Your answer is incorrect. Determine the mean velocity, in m/s, the hydrodynamic entry length, in m, and the thermal entry length, in m, for each of the fluids when the fluid temperature is 366 K and the flow rate is 0.014 kg/s. Liquid water engine oil Nak (m/s) ! i XALA(M) xer (m) Attempts: unlimited Submit Answer
3. Water at an average bulk temperature of 80 F flows inside a horizontal smooth tube with wall temperature maintained at 180 F. The tube length is 6 ft and the diameter is 0.5 in. The flow velocity is 0.4 ft/s. Calculate the heat transfer rate. For water, c = 1 Btu/lb-F and k = 4.27 Btu- in/hr-ft2-F. *
Ethylene glycol flows at 0.02 kg/s through a 4-mm diameter, thin-walled tube. The tube is coiled and submerged in a well-stirred water bath maintained at 35°C. If the fluid enters the tube at 93°C, what heat rate and tube length are required for the fluid to leave at 41°C? Neglect heat transfer enhancement associated with the coiling. Draw temperature profile. Net fluld The Colled tubing Well- stirred water bath WW