In a sieve analysis test, 95.5% of the sample is passing the 5mm sieve and 5.13% ispassing sieve #200, which of the following is correct about this sample:O There is no clay in the sample) the percent of silt and clay is: 5.13%There is 4.5% Sand and Gravel in the sampleO 95.5% of the sample is Sand and SiltO O

1)clay = less than 2 micron 2)silt = 2 micron to 75 micron 3)sand = 75 micron to 4.75mm 4)Gravel =…

In a sieve analysis test, 95.5% of the sample is passing the 5mm sieve and 5.13% is passing sieve #200, which of the following is correct about this sample: There is no clay in the sample ) the percent of silt and clay is: 5.13% There is 4.5% Sand and Gravel in the sample 95.5% of the sample is Sand and Silt

In a sieve analysis test, 95.5% of the sample is passing the 5mm sieve and 5.13% is passing sieve #200, which of the following is correct about this sample: There is no clay in the sample ) the percent of silt and clay is: 5.13% There is 4.5% Sand and Gravel in the sample 95.5% of the sample is Sand and Silt

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A hydrometer test was conducted on the material passing sieve No, 200 and the results are listed in the table below, The results of sieve analysis on the soil showed that the percentage passing No. 4 was 90 % and that passing No. 200 was 20 %. Estimate the clay size fraction in the soil. Table : Results of hydrometer test diameter (mm) 0.0700 0.0400 0.0150 0.0020 % finer (combined) 19 finer 95 80 16 65 13 45 0.0010 30 6 Select one:
A liquid limit test on a clay was performed with the following results. The natural water content of the clay is 38% and plastic limit is 21%. Number of Blows 6 12 20 28 32 Water content (%) 52.5 47.1 42.3 38.6 37.5 What is the liquidity index of this clay? (Use Interpolation) Group of answer choices 0.895 0.96 1.08 0.90 Please answer this asap. For upvote. Thanks
Following are the results of a sieve analysis from laboratory activity. Show the necessary calculation and draw the particle size distribution: LL=25% PI=15% a. D10, D30, and D60 b. Uniformity coefficient, Cu c. Coefficient of gradation, Cc d.) USCS Classification
mpt=541762&cmid%3D103601 Marks 25 Question 1 A sample of AL Batina soil tested in the laboratory. The gradation analysis results are as shown in table Q1. The Atterberg limit tests indicate that the liquid limit is LL = 30% and the plastic limit is PL=27%. Table Q1 Sieve No.# Sieve size (mm) Finer (%) 4 4.75 90 8. 2.36 84 16 1.3 60 30 0.6 30 50 0.2 10 200 0.075 8 i. Determine the uniformity coefficient Marks] ii. Determine curvature coefficient [5 [5 Marks] iii. Classify AL Batina soil according to Unified Soil Classification System (USCS). [10 Marks] iv. Determine the group symbol and group name Marks) [5
A 35 cc volume of core sampler was used in bulk density determination. The fresh soil in thesampler collected in the field weighed 83.5 g was oven dried. After 24 hours of oven drying thesample at 110oC, 20 grams of moisture were removed. Calculate the following: a. Bulk density b. Moisture content at weight basis and volume basis c. Percent pore space if the particle density is 2.63 g/cc d. Percent pore space filled
A liquid limit test on a clay was performed with the following results. The natural water content of the clay is 38% and plastic limit is 21%. Number of Blows 6 12 20 28 32 Water content (%) 52.5 47.1 42.3 38.6 37.5 What is the plasticity index of this clay? (Use Interpolation) Group of answer choices 15.74% 18.99% 18.85% 17.63% Please answer this asap for upvote. thanks
The dry weight of sample = 1kg. Result of sieve analysis are shown below. Sieve Size Weight retained (g) 4.65 mm 0 2.46 mm 100 1.98 mm 250 0.30 mm 350 0.10 mm. 200 0.5 mm 100 Determine the Fineness Modulus.
Determine the Fineness Modulus of the sand given its sieve analysis in the following table. (round to 2nd decimal place) Weight Retained Sieve (g) 3/8 in. 10 No.4 80 No.8 80 No.16 350 No.30 240 No.50 80 No.100 160
A 627-g sample of sand was found to have the following amounts of material retained on each sieve/pan: 3/8 in. = 22 g, No. 4 = 45 g, No. 8 = 96 g, No. 16 = 122 g, No. 30 = 163 g. No. 50 86 g, No. 100 = 51 g, No. 200 = 30 g, pan = 11 g a. Calculate the fineness modulus of the sand. b. Is this sieve analysis valid for acceptance purposes? Explain why. c. Does the sand meet the particle size criteria of ASTM C 33. Fully justify your answer (list and check all relevant criteria from ASTM C33)
If the weight of sample of sand in sieve analysis test was 420 gm and the weight retained on sieve are shown in table below. Is the sand satisfying the specification? Calculate the fineness modulus of sand and what is the average size ? Sieve size 10 2.36 1.18 0.6 0.3 0.15 < 0.15 (mm) Weight 8.4 63 96.6 143 59 34 16 retained (gm) Sieve size Specification limits for cumulative passing (mm) Zone 1 Zone 2 Zone 3 Zone 4 9.5 100 100 100 100 4.75 100 - 90 100 - 90 100 - 90 100 -95 2.36 95 -60 100 - 75 100 - 85 100 - 95 1.18 70 - 30 90 - 55 100 - 75 100 - 90 0.6 34 15 59 - 35 79 - 60 100 - 80 0.3 20 - 5 30 - 8 40 - 12 50 - 15 0.15 10 - 0 10 - 0 10 - 0 15 - 0 < 0.15 ------ ------
Problem#1: An undisturbed sample of silty sand was brought to the laboratory at its natural water content, and the following measurements were made: Total mass at the natural water content: 1523.6g Mass of oven-dried sample: 1318.3g Total volume of sample: 728.2cm3 Density of the mineral solids: 2.7g/cm3 Calculate the porosity n, void ratio e, volumetric water content 0 and dry bulk density pb.
A dry sand is placed in a containerhaving a volume of 0.0089 cm3. The dry weight of the sample is 0.014 grams. Water is carefully added to the container so as not to be disturbthe condition of the sand. When the container is filled, the combined weight of the of soil plus water is 0.0174 grams. With this, find the void ratio, the porosity, the water content, the specific gravity thepertinent unit weights of the soil sample.