Francisco Corporation is constructing a new building at a total initial cost of $10,000,000. The building is expected to have a useful life of 50 years with no residual value. The building’s finished surfaces (e.g., roof cover and floor cover) are 5% of this cost and have a useful life of 20 years. Building services systems (e.g., electric, heating, and plumbing) are 20% of the cost and have a useful life of 25 years. The depreciation in the first year using component depreciation, assuming straight-line depreciation with no residual value, is: a. $200,000. b. $215,000. c. $255,000. d. None of the above.

Francisco Corporation is constructing a new building at a total initial cost of $10,000,000. The building is expected to have a useful life of 50 years with no residual value. The building’s finished surfaces (e.g., roof cover and floor cover) are 5% of this cost and have a useful life of 20 years. Building services systems (e.g., electric, heating, and plumbing) are 20% of the cost and have a useful life of 25 years. The depreciation in the first year using component depreciation, assuming straight-line depreciation with no residual value, is: a. $200,000. b. $215,000. c. $255,000. d. None of the above.

EBK CONTEMPORARY FINANCIAL MANAGEMENT

14th Edition

ISBN:9781337514835

Author:MOYER

Publisher:MOYER

Chapter9: Capital Budgeting And Cash Flow Analysis

Section: Chapter Questions

Problem 10P

See similar textbooks

Similar questions

Newmarge Products Inc. is evaluating a new design for one of its manufacturing processes. The new design will eliminate the production of a toxic solid residue. The initial cost of the system is estimated at 860,000 and includes computerized equipment, software, and installation. There is no expected salvage value. The new system has a useful life of 8 years and is projected to produce cash operating savings of 225,000 per year over the old system (reducing labor costs and costs of processing and disposing of toxic waste). The cost of capital is 16%. Required: 1. Compute the NPV of the new system. 2. One year after implementation, the internal audit staff noted the following about the new system: (1) the cost of acquiring the system was 60,000 more than expected due to higher installation costs, and (2) the annual cost savings were 20,000 less than expected because more labor cost was needed than anticipated. Using the changes in expected costs and benefits, compute the NPV as if this information had been available one year ago. Did the company make the right decision? 3. CONCEPTUAL CONNECTION Upon reporting the results mentioned in the postaudit, the marketing manager responded in a memo to the internal audit department indicating that cash inflows also had increased by a net of 60,000 per year because of increased purchases by environmentally sensitive customers. Describe the effect that this has on the analysis in Requirement 2. 4. CONCEPTUAL CONNECTION Why is a postaudit beneficial to a firm?
A firm is considering replacing a machine that has been used for making a certain kind of packaging material. The new machine will cost $31,000 and will have an estimated economic life of 10 years with a salvage value of $2,500. Operating costs are expected to be $1,000 per year throughout its service life. The machine currently in use had an original cost of $25,000 four years ago, and its service life (physical life) at the time of purchase was estimated to be seven years with a salvage value of $5,000. This machine has a current market value of $7,700. If the firm retains the old machine, its updated market values and operating costs for the next four years will be as follows: The firm's minimum attractive rate of return is 12%.(a) Working with the updated estimates of market values and operating costs over the next four years, determine the remaining useful life of the old machine.(b) Determine whether it is economical to make the replacement now.(c) If the firm's decision in part…
A company is considering to buy a new machine for the production of its product. Currently the company is producing 1,000 products per hour with 5 workers that are paid $10 per hour each. The price of the new machine under consideration is $22,000 with useful life of 10 years and the salvage value is estimated to be $500. The annual operating & maintenance cost of the new machine is $2,000 and requires one skilled operator, that will be paid from $24 per hour, and can produce 1,500 products per hour. If the company uses MARR of 8% p.a., answer the following: (a) What is the breakeven point? (use AW). (b) What is the interpretation of this breakeven point? Explain. (c) If the company needs 180,000 products per year, should they buy the machine? Show all work. (d) What should be the total annual operating & maintenance cost of the machine in order to breakeven at the production level of 200,000 products? Note: You should first define your variable.
Two alternative machines are being considered for a manufacturing process. Machine A has an initial cost of $75,200, and its estimated salvage value at the end of its six years of service life is $21,000. The operating costs of this machine are estimated to be $6,800 per year. Extra income taxes are estimated at $2,400 per year. Machine B has an initial cost of $44,000, and its salvage value at the end of its six years of service life is estimated to be negligible. Its annual operating costs will be $11,500. Compare these two alternatives by the present-worth method at i = 13%.
A die-cutting machine was purchased three years ago for $450,000. The useful life of the equipment is Estimated at eight years with a zero salvage value. The annual income earned with equipment is $190,000, operating and labor costs are $110,000 per unit. year. A new machine with increased production capacity can be purchased that would increase revenue to $250,000 per year, with operating and labor costs of $130,000. The cost of the new machine is $600,000 with a salvage value of zero and a useful life of five years. The used machine can now be sold for $300,000. The equipment is depreciated on a straight-line basis, taxes are paid at 45%, and the company's MARR is 10%. Determine the economic desirability of the replacement.
A specialty concrete mixer used in construction was purchased for $300,000 7 years ago. Its annual O&M costs are$105,000. At the end of the 8-year planning horizon, the mixer will have a salvage value of $5,000. If the mixer isreplaced, a new mixer will require an initial investment of $375,000. At the end of the 8-year planning horizon, itwill have a salvage value of $45,000. Its annual O&M cost will be only $40,000 due to newer technology. Analyzethis using an EUAC measure and a MARR of 15 percent to see if the concrete mixer should be replaced if the oldmixer is sold for its market value of $65,000.a. Use the cash flow approach (insider’s viewpoint approach). (11.2.1)b. Use the opportunity cost approach (outsider’s viewpoint approach). (11.3.1)
There are two alternatives for the place where a factory will be constructed. For the 1st alternative, the initial cost is $2,830,000. The rent of the area where the plates produced in the factory will be stored is $117,000 per year. It is estimated that the annual operating and maintenance cost of the factory will be $26,500 and the annual energy cost will be $42,500. The economic life of the factory is 8 years. For the 2nd alternative, the initial cost is $3,434,000. The produced plates will be stored inside the factory. It is estimated that the annual operating and maintenance cost of the factory will be $44,500 and the annual energy cost will be $63,000. The economic life of the factory is 6 years. The interest rate of 12% per year compounded quarterly will be used for the payments to be made to the bank. Determine the most economically suitable option using the Net Present Value (NPV) analysis with the least common multiple (LCM) approach. !!Net cash flow diagrams must be…
Apricot Computers is considering replacing its material handling system and either purchasing or leasing a new system. The old system has an annual operating and maintenance cost of $31,000, a remaining life of 8 years, and an estimated salvage value of $4,800 at that time. A new system can be purchased for $284,000; it will be worth $24,000 in 8 years; and it will have annual operating and maintenance costs of $16,000/year. If the new system is purchased, the old system can be traded in for $22,000. Leasing a new system will cost $25,000/year, payable at the beginning of the year, plus operating costs of $7,400/year, payable at the end of the year. If the new system is leased, the old system will be sold for $9,600. MARR is 16%. Compare the annual worths of keeping the old system, buying a new system, and leasing a new system based upon a planning horizon of 8 years. Click here to access the TVM Factor Table Calculator For calculation purposes, use 5 decimal places as displayed in the…
Apricot Computers is considering replacing its material handling system and either purchasing or leasing a new system. The old system has an annual operating and maintenance cost of $35,000, a remaining life of 8 years, and an estimated salvage value of $5,100 at that time. A new system can be purchased for $286,000; it will be worth $26,000 in 8 years; and it will have annual operating and maintenance costs of $18,000/year . If the new system is purchased, the old system can be traded in for $18,000. Leasing a new system will cost $27,000/year , payable at the beginning of the year, plus operating costs of $9,100/year , payable at the end of the year. If the new system is leased, the old system will be sold for $10,000. MARR is 14%. Compare the annual worths of keeping the old system, buying a new system, and leasing a new system based upon a planning horizon of 8 years. What is the EUAC of the best option using the cash flow approach?
A firm is considering replacing a machinethat has been used to make a certain kind of packaging material. The new, improved machine willcost $31,000 installed and will have an estimatedeconomic life of 10 years with a salvage value of$2,500. Operating costs are expected to be $1,000per year throughout the service life of the machine.The old machine (still in use) had an original cost of$25,000 four years ago, and at the time it was purchased, its service life (physical life) was estimatedto be seven years with a salvage value of $5,000. Theold machine has a current market value of $7,700. Ifthe firm retains the old machine, its updated marketvalues and operating costs for the next four years willbe as given in Table P14.8.The firm’s MARR is 12%.(a) Working with the updated estimates of marketvalues and operating costs over the next fouryears, determine the remaining useful life of theold machine.(b) Determine whether it is economical to make thereplacement now.(c) If the firm’s…
An assembly operation at a software company currently requires $100,000 per year in labor costs. A robot can be purchased and installed to automate this operation, and the robot will cost $200,000 with no MV at the end of its 10-year life. The robot, if acquired, will be depreciated using SL depreciation to a terminal BV of zero after 10 years. Maintenance and operation expenses of the robot are estimated to be $64,000 per year. Thecompany has an effective income tax rate of 40%. Invested capital must earn at least 8% after income taxes are taken into account. Solve, a. Use the IRR method to determine if the robot is a justifiable investment. b.If MACRS (seven-year recovery period) had been used in Part (a), would the after-tax IRR be lower or higher than your answer to Part (a)?
Eight years ago, the Blank Block Building Company installed an automated conveyor system for $38,000. When the conveyor is replaced, the net cost of removal will be $2500. The minimum EUAC of a new conveyor is $6500. When should the conveyor be replaced if BBB’s MARR is 12%? The O&M costs for the next 5 years are $5K, $6K, $7K, $8K, and $9K.