Create and enter a program that performs the following operation. Starting condition should be all output lights are off. Switch I:0/0 will start the sequence (no other switch will start the sequence). When switch I:0/0 is momentarily turned on, the light immediately above it (0:0/0 will turn on). When the switch immediately to the left (1:0/1) is momentarily actuated, O:0/1 will turn on and 0:0/0 will turn off, provided that 0:0/0 was on prior to momentarily actuating I:0/1. This sequence will continue as each switch to the left is actuated and will wrap around when 0:0/7 is on and switch I:0/0 is actuated. The output lights will stay on until the next one in the sequence is turned on. While in the sequence, no other single switch closure will cause any other lights to light. Submit your program after it has been checked by the instructor. Grading Met Not Met Communication (RSLinx) correctly set-up with the PLC PLC hardware (/o Configuration) correctly set-up Program entry and verification (no errors) Successful download to PLC and PLC goes into RUN (No Faults) Use of descriptors, symbols, and rung comments Program logic operates according to above specification (3pts) Program is verified by instructor and submitted

Create and enter a program that performs the following operation. Starting condition should be all output lights are off. Switch I:0/0 will start the sequence (no other switch will start the sequence). When switch I:0/0 is momentarily turned on, the light immediately above it (0:0/0 will turn on). When the switch immediately to the left (1:0/1) is momentarily actuated, O:0/1 will turn on and 0:0/0 will turn off, provided that 0:0/0 was on prior to momentarily actuating I:0/1. This sequence will continue as each switch to the left is actuated and will wrap around when 0:0/7 is on and switch I:0/0 is actuated. The output lights will stay on until the next one in the sequence is turned on. While in the sequence, no other single switch closure will cause any other lights to light. Submit your program after it has been checked by the instructor. Grading Met Not Met Communication (RSLinx) correctly set-up with the PLC PLC hardware (/o Configuration) correctly set-up Program entry and verification (no errors) Successful download to PLC and PLC goes into RUN (No Faults) Use of descriptors, symbols, and rung comments Program logic operates according to above specification (3pts) Program is verified by instructor and submitted

C++ Programming: From Problem Analysis to Program Design

8th Edition

ISBN:9781337102087

Author:D. S. Malik

Publisher:D. S. Malik

Chapter5: Control Structures Ii (repetition)

Section: Chapter Questions

Problem 27PE

See similar textbooks

Similar questions

Please make a program flowchart of this process: Start Throw the dice: the number indicated by dice is 3. Move the coin: through 3 blocks on the board. Landed on snake head?: No. Landed on the bottom of the ladder?; Yes. Move up the ladder: reached block 14 on the board. Reached the last block of the g ame?:No. Give dice to next player. Enter the loop till the last block of the game is reached. End
a. int i = 2; while (i 8) int i = 2; break; while (i <= 4) System.out.println (i++); d. int i = 2; while (i <= 5) System.out.println (i++);
Given a directed line from point p0(x0, y0) to p1(x1,y1), you can use the following condition to decide whether a point p2(x2, y2) is onthe left of the line, on the right, or on the same line.Write a program that prompts the user to enter the three points for p0, p1, and p2and displays whether p2 is on the left of the line from p0 to p1, to the right, or onthe same line.
Using conditional statements and looping statements, construct a Java program for a scientific calculator. Your program should have a top- level menu like 1. Arithmetic Calculations 2. Logarithmic Calculations 3. Trigonometry Calculations 4. Converter Upon choosing an option, display a sub-menu for each top-menu and upon choosing an option from the sub-menu, read relevant data from the user and perform the corresponding operation and print the result. Your program should exit only when the user types your registration number
Design a program for the Hollywood Movie Rating Guide, which can be installed in a kiosk in theaters. Each theater patron enters a value from 0 to 4 indicating the number of stars that the patron awards to the Rating Guide's featured movie of the week. If a user enters a star value that does not fall in the correct range, reprompt the user continuously until a correct value is entered. The program executes continuously until the theater manager enters a negative number to quit. At the end of the program, display the average star rating for the movie.
Q15. * After performing the operations: dequeue(), dequeue(), enqueue('S'), the value of Front becomes ........ 4 O 1 O 3 O 2 0 E Front 1 X 2 A 3 M Rear 4
Consider a vending machine that offers the following options: [1] Get gum [2] Get chocolate [3] Get popcorn [4] Get juice [5] Display total sold so far [6] Quit Design and implement a program that continuously allows users to select from these options. When options 1–4 are selected an appropriate message is to be displayed acknowledging their choice. For example, when option 3 is selected the following message could be displayed: Here is your popcorn When option 5 is selected, the number of each type of item sold is displayed. For example: 3 items of gum sold 2 items of chocolate sold 6 items of popcorn sold 9 items of juice sold When option 6 is chosen the program terminates. If an option other than 1 – 6 is entered an appropriate error message should be displayed, such as: Error, options 1-6 only!
While Loop (PLEASE COMPLETE IN JAVA)Instructions Write a program that finds out the perimeter of a multi-sided shape. Perimeter of a multi-sided shape can be found by adding all of the sides together.The user should enter each number at the command prompt. The user will indicate that he or she isfinished entering the number by entering the number -1.Example:This program will sum a series of numbers.Enter the next number (enter -1 when finished)> 2Enter the next number (enter -1 when finished)> 2Enter the next number (enter -1 when finished)> 1Enter the next number (enter -1 when finished)> 1Enter the next number (enter -1 when finished)> -1The sum of your numbers is 6
Blinking We want to create a program that continuously turns pin 13 ON waits for 1second then turns pin 13 OFF, then waits 1 second and turns pin 13 back ON. Write the Arduino code with comments to control the pin 13. Blinking We want to create a program that continuously turns pin 13 ON waits for 1second then turns pin 13 OFF, then waits 1 second and turns pin 13 back ON. Write the Arduino code with comments to control the pin 13.
Write a program that asks for two numbers. After the input of two numbers, ask the user whatoperation to do between the numbers. Perform the operation according to the user’s choice and displaythe result. After the display, ask the user if he wants to continue. If the user continues, ask for a numberand an operation. Perform the selected operation with the recent result and the new input value. Displaythe result according to the user’s choice and ask the user again if he wants to continue. Repeat thisprocess as long as the user wants to continue.When selecting an operation, it must be case sensitive. If the user provides an invalid input in selectingan operation, display an error message and ask again for an operation. The program must not exit. Theprogram will only terminate after the user select not to continue.
Homework 2: It is required from you to write a program for switch light with two buttons that are connected to two lights. The first situation you can chose either to switch ON one of these lights separately and printing out a message saying that, the light is switch ON. The second situation you can switch ON the two lights at the same time and the output message will say the 1st and the 2nd light are ON.
Homework 1: Write a program for a single switch light if you entered 1 then, it will printout a message saying "The light is ON " otherwise it will printout a message saying " You should entered 1 to switch ON the light". After you execute the program separately at each time your run the program the output look like below: