Consider a silicon wafer positioned in a furnace that is zone-heated on the top section and cooled on the lower section. The wafer is placed such that the top and bottom surfaces of the wafer exchange radiation with the hot and cold zones respectively of the furnace. The zone temperatures are Tsur.h = 900 K and Tsur.c = 330 K. The emissivity and thickness of the wafer are ɛ = 0.65 and d = 0.78 mm, respectively. With the ambient gas at T, = 700 K, convection heat transfer coefficients at the upper and lower surfaces of the wafer are 8 and 4 W/m2-K. Find the steady-state temperature of the wafer, in K.

Consider a silicon wafer positioned in a furnace that is zone-heated on the top section and cooled on the lower section. The wafer is placed such that the top and bottom surfaces of the wafer exchange radiation with the hot and cold zones respectively of the furnace. The zone temperatures are Tsur.h = 900 K and Tsur.c = 330 K. The emissivity and thickness of the wafer are ɛ = 0.65 and d = 0.78 mm, respectively. With the ambient gas at T, = 700 K, convection heat transfer coefficients at the upper and lower surfaces of the wafer are 8 and 4 W/m2-K. Find the steady-state temperature of the wafer, in K.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Determine radiation heat loss from a steel tube of outside diameter 60 mm and 5m long at a temperature of 327 °C if the tube is inside a square conduit made of brick having 0.4 m side as shown in given figure and temperature of 25 °C. (Take, ɛ(steel)= 0.8, e(brick)= 0.9. Steel tube(1) Brick(2)
! Required information Irradiation on a semi-transparent medium is at a rate of 640 W/m². If 160 W/m² of the irradiation is reflected from the medium and 130 W/m² is transmitted through the medium, Determine the absorptivity of the medium. The absorptivity of the medium is 0.75 X
1. A furnace is of cubical shape with the dimensions of 4m X 4m X 4m. The top surface is heated by electric resistance heaters providing a power input of3.5x10 W, the side walls are well insulated, and the bottom surface is maintained at 350K. Calculate the temperatures of the top and side surfaces if the emissivities of the top and bottom surfaces are 0.7 and 0.5, respectively.
Fast Please..
6. An electric hot plate is placed in a room which is maintained at a temperature of 297 K. The plate is maintained at a temperature of 403 K and has an emissivity of 0.8. If the plate surface resembles a circular disc of diameter 250 mm, electrical power consumed by the hot plate will be; a. 22 W b. 65 W c. 75 W d. 86 W
Radiation heat transfer Example: Q1: A large slab of steel 0.1 m thick has in it a 0.1 m-diam hole, with axis normal to the surface. Considering the sides of the hole to be black, specify the rate of radiative heat loss from the hole in W. The plate is at 811 K, the surroundings are at 300 K. A₁ T₁ = 811 k -D=0.1 m- A₂ A3 Hole T S=0.1 m
- A furnace can be considered like a long semicylindrical duct of diameter D = 5 m. The base (1) and the dome (2) of the furnace have emissivity's of 0.5 and 0.9 and are maintained at uniform temperatures of 305 and 1000 K, respectively. a- Draw the network of the system. b- Calculate total resistance. b- Determine the net rate of radiation heat transfer per unit length from the dome to the base surface.
Which one is correct answer it fast urgent
PROBLEM 4: A black thermocouple is inside a chamber with black walls. If the air around the thermocouple is at 20°C, the walls are at 100-C, and the heat transfer coefficient between the thermocouple and the air is 75 W/m²K, what temperature will the thermocouple read?
Consider a silicon wafer positioned in a furnace that is zone-heated on the top section and cooled on the lower section. The wafer is placed such that the top and bottom surfaces of the wafer exchange radiation with the hot and cold zones respectively of the furnace. The zone temperatures are Tsur,h = 1050 K and Tsur.e = 330 K. The emissivity and thickness of the wafer are e = 0.65 and d = 0.78 mm, respectively. With the ambient gas at T. = 700 K, convection heat transfer coefficients at the upper and lower surfaces of the wafer are 8 and 4 W/m²-K. Find the steady-state temperature of the wafer, in K. Tw i K
Determine the heat loss by radiation from an oven wall to the wall of a room to which the oven wall is directly facing. Assume that no heat flows through the adjacent walls, which are coated with a reradiating material. The oven wall is square, 4 ft on one side, and is 2 ft from the room wall and parallel to it. The oven wall is steel sheet and is at 400°F, and the wall is at 80°F and is of asbestos board.
A manufacturing facility located at 32° N latitude has a glazing area of 60 m² facing west that consists of double pane windows made of clear glass (SHGC = 0.766). To reduce the solar heat gain in summer, a reflective film that will reduce the SHGC to 0.35 is considered. The cooling season consists of June, July, August, and September, and the heating season, October through April. The average daily solar heat fluxes incident on the west side at this latitude are 2.35, 3.03, 3.62, 4.00, 4.20, 4.24, 4.16, 3.93, 3.48, 2.94, 2.33, and 2.07 kWh/day · m² for January through December, respectively. Also, the unit costs of electricity and natural gas are $0.09/kWh and $0.45/therm., respectively. If the coefficient of performance of the cooling system is 3.2 and the efficiency of the furnace is 0.90, determine the net annual cost savings due to installing reflective coating on the windows. Also, determine the simple payback period if the installation cost of reflective film is $20/m². Answers:…