c) 63.6 N/mm? d) 71.2 N/mm² 7. For an extremely ceramic , the true fracture strain calculated from the reduction in the specimen and the elongation in the length of the sample will have different values. a) True b) False 8. Which of the following stresses are associated with the tightening of a nut on a bolt? P. Tensile stress due to the stretching of bolt Q. Bending stress due to the bending of bolt R. Torsional shear stress due to frictional resistance between the nut and the bolt Select the correct answer using the codes given below. a) P and Q b) P and R c) Only p d) R and Q

c) 63.6 N/mm? d) 71.2 N/mm² 7. For an extremely ceramic , the true fracture strain calculated from the reduction in the specimen and the elongation in the length of the sample will have different values. a) True b) False 8. Which of the following stresses are associated with the tightening of a nut on a bolt? P. Tensile stress due to the stretching of bolt Q. Bending stress due to the bending of bolt R. Torsional shear stress due to frictional resistance between the nut and the bolt Select the correct answer using the codes given below. a) P and Q b) P and R c) Only p d) R and Q

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

- Lo° do A solid cylindrical bar is subjected to tensile test. The initial diameter of the bar is 60 mm. The change in diameter (Ad) after the test is 0,01438 mn The applied load is 130 kN. The inital length of the bar is 240 mm. The change in length (Al) after the test is 0,1987 mm. Evaluate the axial strain. O A) 0,1987 O B) 0,01438 C) 0,000239 O D) 0,000275 E) 0.000828
28 - The strength coefficient and strain-hardening exponent of a certain test metal are 700 MPa and 0,35 respectively. A cylindrical specimen of the metal with starting diameter 78 mm is stretched. If the average flow stress on the part is 420 MPa determine the final diameter of the specimen. a) 75,07 mm b) 39,47 mm c) O 50,37 mm d) O 59,33 mm Boş bırak
A mild steel specimen of Young's Modulus 203 GPa is subjected to a tensile test in a laboratory. The following data are obtained. a) Initial length of the Specimen = 350 mm; b) Initial diameter of Specimen = 13 mm; c) Yield Stress = 132 N/mm2; d) Ultimate Stress = 202 N/mm2; e) Fracture Stress = 178 N/mm2; g) % of Elongation = 59 %; h) % of Reduction in Area = 30 %. i) The elongation of the specimen at load 108 kN (in mm) ii) Load at yielding (in N) - iii) Maximum load (in N) · iv) Final Length (in mm) - v) Final Diameter (in mm) --
Creep time, hour a) Name the three stages of creep deformation. b) Which two creep curves were tested at a higher applied stress? c) Which creep curve was tested at the highest temperature among the 4 tests? d) Provide reasons why creep failure is intergranular. Creep strain, %
A mild steel specimen of Young's Modulus 205 GPa is subjected to a tensile test in a laboratory. The following data are obtained. a) Initial length of the Specimen = 362 mm; b) Initial diameter of Specimen = 19 mm; c) Yield Stress = 123 N/mm2; d) Ultimate Stress = 225 N/mm2; e) Fracture Stress = 190 N/mm2; g) % of Elongation = 56 %; h) % of Reduction in Area = 29 %. i) The elongation of the specimen at load 83 kN (in mm) ii) Load at yielding (in N) iii) Maximum load (in N) iv) Final Length (in mm) v) Final Diameter (in mm)
Ql- mm ,length 40 mm. The final diameter 18 mm and length 45 mm. Draw the force-extension diagram and determine the following : a) Ultimate tensile strength, c) Modulus of elasticity, d) Percent elongation and e) Percent reduction in area. The following data collected from tensile test of a metal bar diameter 20 b) The fracture strength, Force - kN 75 90 | 105 120 131 125 110 25 50 4.7 Extension-mm 0.02 0.04 0.06 0.20 - 0.60 1.60 3.00 4.0 Fracture
Q2c) Listed in the table below is the tensile stress-strain data for different grades of steels. Utilizing the data given answer the three queries given below. Tensile Strain at Fracture Strength Strength Fracture Strength Modulus Material Yield Elastic (MPa) (MPa) (MPa) (GPa) А 410 1440 0.63 265 410 200 220 0.40 105 250 C 815 950 0.25 500 610 800 650 0.14 720 210 E Fractures before yielding 650 550 1) Which will experience the greatest percent reduction in area? Why? 2) Which is the strongest? Why? 3) Which is the stiffest? Why? B.
A copper specimen of Young's Modulus 120 GPa is subjected to a tensile test in a laboratory and the following data are obtained. a) Initial length of the Specimen = 395 mm; b) Initial diameter of Specimen = 10 mm; c) Yield Stress = 133 N/mm2; d) Ultimate Stress = 228 N/mm2; e) Fracture Stress = 178 N/mm2; g) % of Elongation = 59 %; h) % of Reduction in area = 41 %. Determine the following i) The elongation of the specimen at load 101 kN (in mm) ii) Maximum load (in N) iii) Fracture load (in N) iv) Final Length (in mm) v) Final Diameter
Q2c) Listed in the table below is the tensile stress-strain data for different grades of steels. Utilizing the data given answer the three queries given below. Material Yield Strength Tensile Strain at Fracture Elastic Strength Fracture Strength (MPa) Modulus (MPa) (МPa) (GPa) A 410 1440 0.63 265 410 B 200 220 0.40 105 250 815 950 0.25 500 610 800 650 0.14 720 210 E Fractures before yielding 650 550 1) Which will experience the greatest percent reduction in area? Why? 2) Which is the strongest? Why? 3) Which is the stiffest? Why?
A tensile test is performed to determine the parameters strength constant C and strain-rate sensitivity exponent m for a certain metal. The temperature at which the test is performed at 500 °C. At a strain rate=12/s, the stress is measured at 160 MPa; and at a strain rate%3D250/s, the stress =300 MPa. Determine m. a) 0,355 b) 0,534 c) 0,207 0.103
A brittle material typically exhibits substantial plastic deformation with high energy absorption before fracture. A)True B)False
1. The data for a tensile test is given in table 1. The sample has a diameter of 4.5 mm and a length of 250mm. Mass Force Stress Elongation Strain kg N MPа mm 344 0.84 405 1.12 458 1.62 469 2.42 458 2.98 421 3.65 Table 1 Maximum elastic strain occurs when a force of 3.37 kN is applied. a) Calculate the yield strength of the material. b) What is the value of Young's modulus of this material c) Calculate the true ultimate tensile strength of the material. d) What will the uniform strain be? e) Compare the resilience of this material with spring made of material that has a resilience of 300KJ/m³. Would you use the material of the tensile test for a spring and explain why.