bucket of water with a mass of 25 kilograms is lifted from a well by a rope which is wound around a cylinder with a radius of 0.10 meters. A 0.50 meter crank is attached to the cylinder so that it wraps the rope around the cylinder. what is the minimum force that must be applied to the crank to lift the water bucket

A 2.0-m-long rod has a density in kilograms per meter A = a + bx ,where a = 1.0 kg/m, b = 1.0 k9/m², and x is the distance from the left end of the rod. The rod rests horizontally with each end supported by a scale. The force exerted by the left scales is 39.2 N 22.9 N 16.3 N 4.0 N 32.6 N

A speedboat with a mass of 545 kg545 kg (including the driver) is tethered to a fixed buoy by a strong 32.7 m32.7 m cable. The boat's owner loves high speed, but does not really want to go anywhere. So the owner revs up the boat's engine, makes a lot of noise, and runs the boat in circles around the buoy with the cable supplying all the necessary centripetal force. When the tension of the cable is steady at 13700 N,13700 N, with what force is the boat's engine pushing the boat? Different physics textbooks treat drag force somewhat differently and use different formulas. For the present purpose, take the water's drag force on the boat to be (450 kg/m)×?2,(450 kg/m)×v2, where ?v denotes the boat's speed. Ignore any drag force on the cable.

A speedboat with a mass of 505 kg (including the driver) is tethered to a fixed buoy by a strong 29.7 m cable. The boat's owner loves high speed, but does not really want to go anywhere. So the owner revs up the boat's engine, makes a lot of noise, and runs the boat in circles around the buoy with the cable supplying all the necessary centripetal force. When the tension of the cable is steady at 12300 N, with what force is the boat's engine pushing the boat? Different physics textbooks treat drag force somewhat differently and use different formulas. For the present purpose, take the water's drag force on the boat to be (450 kg/m) × v², where v denotes the boat's speed. Ignore any drag force on the cable. force: N & TOOLS x10

A small ball is attached to one end of light rope that has a length of 4.0 m. The other end of the rope is attached to the ceiling. The ball is held with the rope horizontal and released from rest. The ball moves in the motion of an arc of the circle. When the ball is at its lowest point, with the rope vertical, the tesion of the rope is 15.5 N. What is the mass of the ball?

A wheel of radius 0.269 m, which we can model as a thin disk, is mounted on a frictionless horizontal axis. The mass of the wheel is 2.44 kg. A massless cord wrapped around the wheel is attached to a block of 4.16 kg that slides on a horizontal frictionless surface. If a horizontal force P with a magnitude of 10.1 N is applied to the block as shown below. If the wheel and block start at rest, and the block is moved through a displacement of 2.60 m what is the final angular velocity of the wheel in rad/s, assuming the cord does not slip. P

Find gravitational force as formula

Please help: A 2.90 kg bucket is attached to a disk-shaped pulley of radius 0.131 m and mass 0.792 kg. If the bucket is allowed to fall, How far does the bucket drop in 1.20 s?

Item 9 A garage door is mounted on an overhead rail (Figure 1). The wheels at A and B have rusted so that they do not roll, but rather slide along the track. The coefficient of kinetic friction is 0.54. The distance between the wheels is 2.00 m, and each is 0.50 m from the vertical sides of the door. The door is uniform and weighs 900 N. It is pushed to the left at constant speed by a horizontal force F, that is applied as shown in the figure. Figure B k A K 2.00 m -3.00 m h F 1 of 1 If the distance his 1.60 m, what is the vertical component of the force exerted on the wheel A by the track? Express your answer to two significant figures and include the appropriate units. μA ? nA = Value Units Submit Previous Answers Request Answer X Incorrect; Try Again; 4 attempts remaining Part B If the distance h is 1.60 m, what is the vertical component of the force exerted on the wheel B by the track? Express your answer with the appropriate units. μÅ ? nB = Value Units Submit Request Answer Part…